【DRC】Heat Shield Review
Since it got so hot that the heat from a motorcycle is uncanny and a frame etc. cannot be touched, it used sticking a heat insulating material and making heat reduce. Although a sheet is used thickness [ of about 0.5 mm ] [attachment] - Cutting off, a
Since it got so hot that the heat from a motorcycle is uncanny and a frame etc. cannot be touched, it used sticking a heat insulating material and making heat reduce.
Although a sheet is used thickness [ of about 0.5 mm ] [attachment] - Cutting off, a cut end will become fluffy.
- to which the way which used scissors from the cutter can hold down scuffing a little -- CHIKUCHIKU when the fluffy portion was touched.
When inhaling, unsavory ? (=omega=;), the portion which was unexpectedly weak and was cut thinly, the cut end portion, etc. were able to stick reasonable also in the portion which has - level difference torn simply, but.
A part of stuck place, and the [effect] and frame cover flesh side which cannot stick on a slot firmly to a corner, but becomes like U-shaped -- Although Tokoro who stuck was touched and compared with the place which has not been stuck, a difference is a pear sheet flesh side to heat. -- Although I feel a little that the propagation of heat became late,
Heat is a transmitted - tank side cover eventually. -- As there was no interception of the [general comment] for which I feel that it is not a little hot in comparing with the time of not having stuck, and the expected heat, possibly the tolerance to heat was exceeded.
It seems that it is better not to expect interception of heat since protecting from heat is the purpose.
Responses
Other reviews
It is good
I put it on the back of the Side cowl.
The heat from the Exhaust System is also Shutting out and the Cowl is not melting.
It sticks firmly to the surface, so it can be used as a
There is no Trouble that peels off after a few years.
Very good stuff
View detail
It is used for the Full cowl made from a CLEVERWOLF.I was troubled by the heat of a catalyst although it was used having processed the Cowl corresponding to un-[ catalyst ]. It was in the state which a Undercowl burns with the heat of a catalyst i
It is used for the Full cowl made from a CLEVERWOLF.I was troubled by the heat of a catalyst although it was used having processed the Cowl corresponding to un-[
catalyst ].
It was in the state which a Undercowl burns with the heat of a catalyst inevitably and a hole is likely to open.This product was discovered at such time.It is a famous Manufacturer called
DRC and is reliable.It purchases by prompt decision.The
rear face is a powerful Tape and attachment is dramatically easy.The form of a Cowl can be made to fit that it is easy to cut.
It is used for a Circuit run, checking durability from now on.
View detail
It purchases on the back side of the big tank of WR250R for thermal insulating processing. It is [ that double-stick tape is also thick solid and it is easy to stretch a curved surface ] very good.
It purchases on the back side of the big tank of WR250R for thermal insulating processing.
It is [ that double-stick tape is also thick solid and it is easy to stretch a curved surface ] very good.
View detail
Work good considering a price is done and there is well. Work is also easy and should just have scissors. I wound around the brake hose passing through the neighborhood of piping of a muffler. Although it is unknown, isn't it profitable which
Work good considering a price is done and there is well.
Work is also easy and should just have scissors.
I wound around the brake hose passing through the neighborhood of piping of a muffler.
Although it is unknown, isn't it profitable which actually works if big sense of security can be got in this amount of money?
View detail