Reviews
Convincing texture
SizeAbout 820×I bought the one of 2000mm 。
I liked the texture of the Nylon raising on the front.
When I unpacked it, there was a smell peculiar to Rubber, so I dried it in the shade for a couple of days.
I was not sure if I wanted to go with a less expensive competitor, but I am satisfied with the DAYTONA product.
View detail
It would be useful to have when pinching round objects with Vise
I had only had a Mini Vice until now, but when I needed to do some welding, I bought a medium sized Vise. I bought it because I thought it would be useful.
I wish the material was sized to fit the groove of this product, but it is a little difficult to use when the angle is not right. Also, this product has a strong magnet that sticks to the vise, but it is a little troublesome to use it after aligning the teeth of the upper and lower jaw because the teeth of the upper and lower jaw seem to be misaligned and the tooth sides are not aligned properly.
So, it is not suitable for all purposes, but there will be several times in a lifetime when it would be very convenient to have it. The color is Kawasaki green, which I personally like, but there is no Kawasaki motorcycle at the moment, so I am not sure.
View detail
DAYTONAFilter wrench
I bought it for my motorcycle, but I can also use it in my car. View detail
DAYTONA Filter wrench
I bought it for my Motorcycle, but it can be used for my car as well. View detail
feel well
I think the price is still a little high since it is not something that is replaced frequently. However, safety is our top priority, so I think it is unavoidable. View detail
To the OH of SEROW.
I bought it because it is cheap, around OH above the waist of SEROW. Don't forget about Valve compound. View detail
For CT110 HUNTER CUB
I used it to service the front brake on my new CT110 HUNTER CUB because it squeals just before stopping. I bought it because it was cheaper than others and the feeling was good. View detail
Swing Arm scale is for reference only
As the title says, the scale on the Swing Arm is for reference only.
I was looking at Motorcycle from behind and noticed that the teeth of Sprocket were somehow closer to the body side of Chain.
Quantity in the Swing Arm scale:Pair (for Left and Right) The position of Chain and Sprocket is not good, even though they are in the same position.
The Chain Alignment Tool was used to straighten the Chain, and the alignment between the Chain and the Sprocket was perfectly aligned, and as a byproduct, the Swing Arm scale was set to "Quantity:Pair (for Left and Right) We found that there was a Gap of about 2-3mm in the
If the alignment of the Chain is not correct, it can cause uneven wear of the Tire and damage to the Sprocket and Chain.
This is a Tool of Recommendation for those who are interested in getting ChainAlignment right!
View detail
a little expensive
10mm on brembo OEMHose, works well.
I like the fact that there are many Size options.
It is more expensive, but Individual Youth offers Quantity:2pc. Set is enough, so Quantity is wasted.:Better than paying high Gold amount for 1 Set of 10pcs.etc.
However, I think there are cases of multiple Wiring, so 4 to Quantity:Variation of 1 Set of 6pcs. is also desired.
View detail
good
There is no space between the top Right edge and the bottom Left edge, so you can't remove that Large size, but it was comfortable to touch and the Large size was reasonable, so it was easy to use. View detail
Rubberized to prevent falling off
The Spark plug is held in place by a rubber inside to prevent it from falling out.
Well, I have no problem with on-board tools, but I want to manage Torque, so I bought a Plug socket.
View detail
Fits: SUZUKI SKYWAVE650 burgmanLX, SUZUKI DL1000 V-STROM650X, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM650, SUZUKI GSX1300 HAYABUSA, SUZUKI V STROM 650, SUZUKI V STROM 1050
DL1000 V-STROM250 for initial Oil replacement and Oil Filterfor replacement.
I purchased this for the first Oil replacement and Oil Filterfor replacement of DL1000 V-STROM250.
I was able to replace the Oil Filter without any problems.
The Bolt hole in the middle makes it easy to remove the Oil Filter.
View detail
Can also be used for Mirror shield
The Mirror shield of the MotorcycleHelmet can crack or deteriorate when cleaned with aggressive cleaners, but there is no such concern with this product. The Merit of the Largeest Merit is its portability, which allows it to be brought along on day-trips. Even in the summer, water will not fly out of the bag. "Dried out." I am glad that I can use it normally without any problems. View detail
Nicely made and very useful
Pretty good at holding motorcycle parts or softer metal you don't wish to mar with the vice teeth. I purchased 2 different jaw pads. Plastic and metal. All were very similar. They give multiple ways to hold part secure with damage. Good quality and durable. Retention magnets are weak though, slight bump and they fall off the jaws. Holding round rods at an angle or parallel to the teeth, not so much. They will warp if given too much torque. View detail
Purchased for Rust removal, surface correction and chamfering.
[Usage]
Bore Up Kit BALI removal, used for rust removal, surface correction, and chamfering, Oil is Daytona Oil stoneOil.
[Feeling of use]
The size is just right to fit in your hand, but be careful not to apply too much pressure or you will shave too much. Use #400 for finishing.
When I first started using it, it sucked in Oil immediately, so I had to put Oil on it thoroughly before using it.
(Points to note)
Recommendation is to put it in a Vinyl bag etc. when storing it. If you put it on paper or cloth, it will be stained by the oil that comes out.
View detail
Purchased for chamfering
[Usage]
Used for Bore Up Kit BALI removal and exhaust surface chamfering, using DAYTONAOil stoneOil.
[Feeling of use]
Good size, fits in my hand, easy to use.
When I first started using it, it sucked in Oil immediately, so I had to put Oil on it thoroughly before using it.
(Points to note)
The Oil that is sucked in comes out gradually.
Recommendation is to put it in a Vinyl bag etc. when storing it. If you put it on paper or cloth, it will be stained by the oil that comes out.
View detail
Power management for old cars!
Purchased to manage power supply for old car!
I am impressed with the function-specific split, and I love the fact that I can visually determine the information I need!
View detail
Purchased for the Wiring branch that does not take up Space!
I bought it for the Wiring branch!
It is convenient for Wiring branching that does not require soldering and does not take up space!
View detail
I was able to exchange Spring with peace of mind.
A special tool is required to remove the rear suspension spring.
There is a special Type tool that attaches directly to the spring and shrinks it, but I fear that it may come off when tightened and the special tool may fly away.
This special DAYTONA tool was able to work safely and stably because it uses ThailandBelt to tension the springs and fix the rear suspension mounting points.
In the actual work, a special tool is used for Rear suspension in quantity.:Set to shrink the Spring and remove the Lockling at the bottom end.
The spring replacement is completed when the new spring to be replaced is shrunk in the same manner, and the Lockling is attached and put back on.
The work was comfortable using solid, specialized tools.
It is a dedicated tool that is used only very occasionally, but it would be nice if the price were lower.
View detail
Use up Size!
I used it for Repair work on a standing rollover scratch. I like that it is water resistant so I can polish with water! I was able to work without feeling Stress because the shavings are hard to clog! View detail