หน้าแรก

【PLUS μ】ตัวอุดจานเบรค อลูมิเนียม 13.85

ภาพผลิตภัณฑ์มีวัตถุประสงค์เพื่อประกอบการอธิบายเท่านั้น และอาจแตกต่างจากผลิตภัณฑ์จริง
ราคาเต็ม: ฿467
คะแนนวีไบค์: 5

    • รหัสสินค้า:
    • PFP-Y05

กรุณาเลือกตัวเลือกของสินค้า


ตรงรุ่น:

YZF-R6 17-21 [Number of units used]16

YZF-R3 15-21 [Number of items used]6

YZF-R25 15-21 [Number of items used]6

DL1000 V-STROM1000 15-20 [Number of units used]16

HAYABUSA 08-21 Board thickness 5.5mm Type AP use [Number of units used] 20

BANDIT1250F 07-16 [Number of units used]16

ZX-14R 12-20 [Number of items used]14

ZX-10R 18-21 Brembo 330mm [pieces used]20

ZX-10R 16-21 330mm [pieces used]20

ดูเพิ่มเติม

รายละเอียดสินค้า

รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate แสดงต้นฉบับ

[คุณสมบัติของสินค้า]

วัสดุ : อลูมิเนียม
•สแตนเลสสตีล Wave Washer, E-ring รวม
•แผ่นดิสก์หนา 4.0 มม. - 5.0 มม
ปริมาณ : 1

[คำอธิบาย]

* วัสดุ: มาพร้อมกับเครื่องซักผ้า Stainless Steel Wave และแหวน E

[คำเตือน]

* มีสีอื่นในภาพ
* โปรดทราบว่าข้อมูลจำเพาะของผลิตภัณฑ์อาจเปลี่ยนแปลงได้เนื่องจากเหตุผลของผู้ผลิต

[รายละเอียดสินค้า]

ビックマシン零
ขาลอยมาตรฐานอลูมิเนียม

ตรงรุ่น

รีวิวสินค้า

    Used for brembo's 5 mm thick FloatingRotor.

    Although it exchanged in the car-mounted condition on the other hand, it is easier to remove it from Wheel as a matter of course.
    Looking at the official site, it is only Wave washer and E Ring as 5 mm thick
    Since OEMPin is only Ping Washer, it has a slight sense of incongruity, but even if it uses about 3000 km, there is no Pin flight or looseness so it will not be a problem for normal use.
    For Race, Circuit use people obviously will not miss Check.

    Since the OEM was worn as it was, Gasha sound was reduced and it became comfortable.
    (Of course, it will not completely be lost)

    I purchased Black without thinking anything, so I do not know the coloring.

    25 years ago, made with MC 28. This time again made with MC21!
    For the time being OEM Rotor to RoseRose ...
    In addition, I painted the color and tried it neatly.
    In terms of performance, feeling is effective.
    Just because it's Returns, I do not run like a long time running. Because I do not do full Brake with a penetration, Full Borrow while leaving Front, it is my favorite point that the appearance is Beauty!.

    25 years ago, made with MC 28. This time again made with MC21!
    For the time being OEM Rotor to RoseRose ...
    In addition, I painted the color and tried it neatly.
    In terms of performance, feeling is effective.
    Just because it's Returns, I do not run like a long time running. Because I do not do full Brake with a penetration, Full Borrow while leaving Front, it is my favorite point that the appearance is Beauty!.

    Purchased with the description that it can also be used for brembo.
    However, when trying to install it pretty hard.
    Although somehow it got in, Clearance was too much and it was hardly moving in the Rigid state though it was a lot of Floating.
    After examining brembo 13. 73 (I do not know if it is all brembo) Against 13. 85.
    It seems that this subtle difference did not fit well successfully.
    I wanted a statement as a precaution.

    Purchased with the description that it can also be used for brembo.
    However, when trying to install it pretty hard.
    Although somehow it got in, Clearance was too much and it was hardly moving in the Rigid state though it was a lot of Floating.
    After examining brembo 13. 73 (I do not know if it is all brembo) Against 13. 85.
    It seems that this subtle difference did not fit well successfully.
    I wanted a statement as a precaution.

    【What made you decide the purchase?】
    It is compatible with OEMbrembodisc of HUSQVARNASM, due to low price, from material and coloring abundance.
    It's better to get it than bremboOEM Product.
    【How was it actually used?】
    Quality is high with almost the same dimensions as OEM Product.
    I like the color of Anodized is beautiful.
    Washer and Circlip are Material : Stainless Steel, cleaner than OEM (Lol)
    【Was it difficult to install? (Hard parts case)】
    It is relatively easy, but there are scenes that need somewhat power skill.
    【Please tell me the point of installation and hang (in the case of Hard parts)】
    It's only the first part of the kitsui, so if you tap it down lightly, then you will come in for a while. However, Material : Because it is Aluminum, handle carefully.
    [Is there anything I was disappointed about?]
    I felt that the repulsive power of Wave washer was weaker than OEM.
    【Hope for Manufacturer - Please let me know if you have any improvement points]
    Because there are few stocks in the shop, it is a small part, so I think if you can mail-out with a simple delivery method such as e-mail facilities.
    【Have you compared items?】
    Husq / bremboOEM Product. Surface is easy to corrode so it looks bad. Also, sometimes it is lost, please check it.
    [Others]
    The HUSQVARNASM 's Speed ??sensor is a Type to be mounted on the floating pin, but it was almost the same size so it could be installed without difficulty.
    Clearance was a little tight, so I adjusted to Sactivity Level by Sandpaper, so I became Exactly.

สินค้าที่มีผู้เข้าชมมากที่สุด

【KN Planning】Aluminum Brake Cam
มือลิง KN Planning ZOOMER (Ruckus, NPS50)
【DOREMI COLLECTION】Long Brake Arm
ก้านจับเบรคแบบยาว DOREMI COLLECTION Z2 (750RS, Z750 Four)
【Performance Technology】Brake Disc Radiator
หม้อน้ำดิสก์เบรก Performance Technology TZR125
【Performance Technology】Brake Disc Radiator
ดิสก์เบรคแต่ง Performance Technology GSX-R600 (Gixxer ,GSXR)
【DOREMI COLLECTION】Master Diaphragm
แผ่นไดอะแฟรม DOREMI COLLECTION W3