Reviews
Fits: KAWASAKI 400SS S3 Mach III, KAWASAKI 750RS Z2, KAWASAKI H1 500SS ( Mach III ), KAWASAKI H1 500SS ( Mach III ), KAWASAKI H1 500SS ( Mach III ), KAWASAKI H1 500SS ( Mach III ), KAWASAKI H2 750SS Mach IV, KAWASAKI W3, KAWASAKI Z1 900 Super Four, KAWASAKI Z1A, KAWASAKI Z1B, KAWASAKI Z2, KAWASAKI Z750 Four Z2, KAWASAKI Z750D
Necessary and sufficient efficacy
I am using it with KawasakiZ1.
We are on Double disk with OEMCaliper.
Is it thanks to the Shim on the back of the Pad?
No squeaking so far.
Braking force, but it does not perform Race.
It works well enough for the TouringLevel's muddy driving.
If you say that this Pad does not stop, then that is too much Speed.
View detail
Fits: BMW F650 GS, Others 600 Super Motard, BETA Jonathan 125, BMW C1, BMW C1 200, BMW F650 CS, YAMAHA TT600RE, YAMAHA BWs125, APRILIA SL750 Shiver GT ABS, YAMAHA WR125X Supermoto, BMW F650, Others VR250 Super,Otard, Others VR250 Enduro, Others Supermotard 610, Others TK, Others SR ZF13.0 J.Juan Calipers, Others S 570E Super Motard, Others S 501 Super Motard, Others SR 600 Motard Racing, Others SR 450 Motard Racing
It works fine
Rear Brake Pads for BWS125 were replaced.
It was very well worn and after the replacement it was very good.
The brake fluid had not been replaced after delivery, so the front and rear were replaced as well.
View detail
Fits: HONDA CN250SE FUSION/HELIX SE, YAMAHA Zuma 125, YAMAHA X-MAX, YAMAHA X-MAX Sport Edition, YAMAHA X-MAX Business ABS, YAMAHA X-MAX ABS, YAMAHA X-MAX 400, YAMAHA X-MAX 400 ABS, YAMAHA X-MAX 250 / ABS, YAMAHA Majesty S, YAMAHA Cygnus X, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA BWs125 R, YAMAHA BWs125, YAMAHA BWs 125
Good Controllability and disc-friendly
Motorcycle is YAMAHA's MT-01.
It has only been installed for a short time, so I can't speak to its durability, but it is a replacement for the DaytonaRed Pad.
Since it is a Rfor Brake to begin with, I was not looking for absolute braking power, but only if I could feel good controllability. Also, I had a memory that when I used Vesla's pad for pad replacement several decades ago, the disc rotors that had been ground into grooves became smooth and smooth, so I had high expectations for the low aggressiveness to the disc (since I have now replaced it with Wave Disc, which is thinner than OEM).
There is of course nothing wrong with the replacement itself. The ZV-SD156/3 product we used this time is 1mm thicker on the One Side than MT-01OEM, and may be too thick to be used with NORMAL thickness Rdiscs, and even if it is, it may be a limit. If you use NORMALRdiscs, it is better to select the product according to the compatibility table (ZV-SD156/2).
The base color of the pad is matte black, which is not too flashy for my taste.
When the car is actually driven and the hit is made, it is difficult to feel a large difference if it is said that the braking force exceeds that of DAYTONARed or OEM, but the braking force seems to be sufficient for the needs.
Control is good and perfect. I thought so.
After running for a while, I still feel that the surface of the Disc Rotor is getting smoother to the touch, and it seems that the gentleness to the DISC is still there.
View detail
Fits: HONDA VF700C Magna, HONDA VF1100S V65 Sabre, HONDA VF1100C V65 Magna, HONDA VF1000F, HONDA GL1200SE-I Gold Wing Aspencade, HONDA Shadow 1100, HONDA GL1200L Gold Wing LTD, HONDA GL1200I Gold Wing Interstate, HONDA GL1200A Gold Wing Aspencade, HONDA GL1200 Gold Wing, HONDA GB500, HONDA CBX750F, HONDA CBR750F Super Aero, HONDA CBR1000F, HONDA CBR600F, HONDA VFR750F, HONDA VFR750F, HONDA VFR700F2, HONDA VFR700F, HONDA VF750F
The result of using various Manufactures
I've used a variety of manufacturers' products, but I've never had a middle class old car. (70s to early 80s) It was the best overall experience for
Especially the slowed down Fee Ring and the less aggressive nature of the disc!
If you don't have external parts, you can't use Metal pad easily because you can't replace the disc as soon as it is damaged.
Of course, it's a Resin pad, so it's not as good as Metal pad.
However, the overall price has gone up so much that it is not a candidate for the next replacement.
I'll use the Red Pad again for the Dust...
It may not be suitable for heavy Large type old car or powerful body (Durability wise)
View detail
Fits: APRILIA Dorsoduro Factory, APRILIA Dorsoduro 750, APRILIA Dorsoduro 1200, BMW F800ST Touring, BMW F800ST, BMW F800S, BMW F800S, BMW F800S Touring, BMW F800R, BMW F800GT, BENELLI Tornado 3, BENELLI TnT899, BENELLI TRK 502, BENELLI Leoncino, BENELLI BN899 Trek, BENELLI BN899 Trek, BENELLI BN756 Cue, BENELLI BN600, BENELLI BN302, BENELLI BN302
It's working!
After about 7,000 miles, the rear pad was reduced and replaced.
Because brembo works well, it seems to be quick to replace the pad...........................................
I thought it would be a hassle to change the rear pad, but I didn't want to damage the disc rotor, so I finally decided to do it.
Overall, it's a good Pad.
View detail
Fits: BETA RR498 4T, BETA RR480, BETA RR390, KAWASAKI KX450F, BETA RR390 Enduro, BETA RR300, BETA RR250, BETA RR125, BETA Crosstrainer, bimota BBX300 Enduro, YAMAHA YZ450FX, YAMAHA YZ450F, YAMAHA YZ450F, YAMAHA YZ250X, YAMAHA YZ250FX, YAMAHA YZ250F Competition, YAMAHA YZ250F Competition, APRILIA SXV550 Supermoto, APRILIA SXV450 Supermoto, APRILIA SVX550
Ineffective Pad No. 1
I preferred to use it on MOTARD's Lear
Most of the RacerMOTARD's OEM installed Rear Brake Pads are It works quite sharply
I'm from the road and I wanted to apply the rear brakes loosely, but it was not easy to use
Rear has a weak initial rise in potency, and the overall effect is 70-80% of the amount you stepped on (the amount you held) All you have to do is give it to me
I was looking for a Pad that was a good choice and came across this Pad
Because of the material called resin, it meets the above requirements
As a pad, it's a little subtle, but it's good in terms of being easy to control ?
By the way, there are other Pads that are made in China or are strangely cheap and ineffective, but
Since the abrasive material may peel off and the back plate may warp, it is important to keep the material in good condition Use the Manufacturer's
View detail
Fits: YAMAHA YZ490, YAMAHA YZ250 Competition, YAMAHA YZ250 Competition, YAMAHA YZ125 Competition, YAMAHA YZ125 Competition, YAMAHA YZ125 Competition, YAMAHA TT600 Acier, YAMAHA TT350 Acier, YAMAHA TT350, YAMAHA TT250, YAMAHA TT250, YAMAHA TT250, YAMAHA IT200 Competition
Easy to use Resin pad
【What made you decide the purchase?】 Price and manageability
【How was it actually used in the rain?】 Unlike METAL, he listens calmly, so it is hard to lock even on rainy days.
【Please tell me the environment such as rainfall and time used】 200ml / It will be a day hazard " (-""-) "
【Fit feeling and height when wearing ? Please tell me the weight etc (Apparel case) 】
[Is there anything I was disappointed about?] nothing special
【Hope for Manufacturer ? Please tell me if there are any improvement points】 Although it is a vehicle in the last 30 years, I am happy to be supplying Brake Pads.
【Have you compared items?】 CARBONE LORRAINE
[Others] TT 350 is the same suspension as YZ 250, 2 Piston Caliper. It shows stable performance under any circumstances.
View detail