Reviews
Highly Universal!
Soft protector to be attached to the corresponding Pants with Magic tape.
This means that you can use Magic tape on any Pants (at your own risk) if you attach it yourself.
View detail
MODEL changed and lighter.
I have several NUCLEONSeries Back Protector, and when compared to the old MODEL SOLE, it is noticeably lighter. It also seems to be more flexible. It fits into the pocket of the BlackProtector without any gap (of course).
The Design has been flamboyant, but it's not something that should be exposed in the first place, so it's fine.
View detail
It's properly cured!
I am not sure about the Protector that comes with the company's Coach jacket as I see it, I don't care if the price goes up, just make this Standard Equipment." I bought it thinking that it was a good idea.
It feels like a very hard, low-resilience material, but when the temperature is high or warmed by body heat, it softens and becomes less sticky and uncomfortable. It is a strange protector that becomes stiff and pushes when it is subjected to impact. I am sure that this is the case, because my hand hurt when I hit it as hard as I could.
I will continue to use it, hoping that it will not be taken care of.
View detail
Good
The company's Mesh jacket (RR7308A) and purchased this product because the chest Protector was an Option.
Jacket was ExactlySized, so this Protector was installed.
I wondered if it would be tight. I thought it might be too tight, but it is not that thick and comfortable to wear.
It is lightweight and appears to be strong.
View detail
Mesh jacket Pad to Mesh
For the mesh jacket used.
Changed from the Pad that was originally included.
The original was thick and hot, and the Jacket itself
It's nice and cool, but my back is sticky with sweat.
Discomfort Max.
Rough & Road's Air Through Pad has been
Ordered it because it looked good at a reasonable price.
I immediately made a slight Size adjustment and installed it.
Temperatures are rising, and mesh jackets are being used.
Drove the car. Comfortable.
View detail
Used for John Doe's M65Type Riding jacket
I bought this jacket to use for M65 Type Jacket of John Doe, and since SAS-TEC Protector was originally attached to the shoulder and elbow, I decided to use this product made by SAS-TEC together with Back Protector. I put in LEVEL1, but it was thinner than I expected, so I might have used LEVEL2 with 19mm thickness. It is indispensable for autumn/winter type. View detail
It makes a difference in peace of mind!
I bought this jacket because my previous Alpinestars jackets made by Komine fit in it, but not zaca.
High safety standards [Color] I feel safe because I am Clear.
I'm glad it's SS and it's flexible.
As a side note, the Alpinestars Jacket was stressful because I had to manually insert and remove the protector, but the zacaSeries has a direct pocket, so I am now free from stress!
View detail
Substitute for knee ligaments
When I was bumped in Motocross, the knee brace did its job and I was only bruised.
It's a small price to pay because if you have torn ligaments, you won't be able to ride for 6 months to a year.
It is a good idea to replace them when they start to feel clammy, as they will become damaged after long use.
Replacement is easy.
View detail
great product
It might seem tight to introduce it to the switch stick at first being new I'll do it soon. Thanks for product quality and delivery speed View detail
Flexible
[How is it used?
It is combined with KUSHITANIJacket.
Was the one you received as per Image?
This was my first time with Chest Protector and I thought it was lumpier than I expected.
If you are used to it, it may feel normal.
How was your experience with it?
The sense of security is not so great because there is a board that seems to be highly defensive where there was none before.
How did it compare to other products?
The fact that it has both a Snap button and Magic tape dramatically improves usability.
I think it can be used for most Motorcycle Jackets.
In addition to Universality, it is more cost-effective than other Manufacturers.
If you don't like Yamaha, I think this is fine.
View detail
Let's protect our chests.
The same is true for all parts, but the shape tends to float, so it may not be suitable for those who chose the Power age because it does not look like a MotorcycleJacket.
PJ-20301 I used it on WaterBlockAll seasonsParka and I am glad I bought it because this one doesn't float much.
It sticks out of the Protector slot a little, but it doesn't fall out or shift, so no problem.
View detail
The back is quite prominent.
The same is true for all parts, but the shape tends to float, so it may not be suitable for those who chose the Power age because it does not look like a MotorcycleJacket.
PJ-20301 I used it on WaterBlockAll seasonsParka but the back floats quite a bit.
View detail
Maybe I don't need shoulders.
The same is true for all parts, but the shape tends to float, so it may not be suitable for those who chose the Power age because it does not look like a MotorcycleJacket.
PJ-20301 I used it on WaterBlockAll seasonsParka and I am glad I bought it because this one doesn't float much.
Quantities at the waist and shoulders:I purchased 2 Sets, but do shoulders strike when falling over? I don't think the shoulder is enough to upgrade.
View detail
just to be sure
The same is true for all parts, but the shape tends to float, so it may not be suitable for those who chose the Power age because it does not look like a MotorcycleJacket.
PJ-20301 I used it on WaterBlockAll seasonsParka and I am glad I bought it because this one doesn't float much.
View detail
bulge warning
Note that the shape of the product will stand out quite a bit.
I used it on WaterproofRidersPants but it was too bulky so I put it back on.
If it is winter wear, it will not be noticeable, so I would recommend it for winter wear.
View detail
Beginners must wear it.
Was the one you received as per Image?
It looks tough, but it is almost unnoticeable when worn.
[How did you feel about the Fit?
Even if you have a thick chest plate, the Protector comes with parts to adjust the front and back width, so it is easy to fit. I fitted it as it is.
How was your experience with it?
You won't feel the weight while riding. The front strap can be removed by simply pulling on the strap at the bottom of the front, and when combined with Alpinestars' Body protector, it fits perfectly.
[Was there anything that disappointed you?
None in particular
How did it compare to other products?
Made by Alpinestars, a trusted manufacturer
The deciding factor in the purchase
Since the body protector is made by Alpinestars, it is better to match the manufacturer of the Neck support and the Protector.
【Included Parts:presence or absence】.
Parts to adjust the width in the front and rear directions are included.
View detail
A gem I finally found.
This is the fourth similar item I have bought and finally came across this gem.
Excellent fit.
View detail
A gem I finally found.
This is the fourth similar one I have bought.
Excellent fit.
View detail
having an effect
I used it for Touring. I am glad that it was a recommendation from the Pro shop. View detail
Comfortable and secure.
I am 177 tall and 68, of medium height and normal build. I bought the M Size after reading the impressions written by several people earlier. I wore it over a winter CompressionUnder and it is almost JUST right. The pad position of the shoulders and elbows are in the Quantity:Pair (for Left and Right) The pad on the back is low and there is a slight discomfort, but it can be managed by making some adjustments when wearing the outer garment. It is very comfortable to wear, and I was right to go down one size to a Large. The sleeves are still long (I have long arms). Also, the neck is a large size. As I get older, my muscles lose weight, and when I put on the outer layer, which used to be just the right size, it feels just right. I like it very much. ?? This is the best hit among all the Motorcycle products I have bought recently. View detail