Reviews
Good to be able to replace the hose without changing it.
Although the Handlebar is just a little bit closer to the front, I can feel quite a difference!
It is easy to replace the hose cable without changing it! All you have to do is to be careful not to damage the nut when removing and installing the bolt.
It looks better and is better positioned!
View detail
Fits: HONDA PCX125HYBRID, HONDA PCX125HYBRID e:HEV, HONDA PCX125, HONDA PCX150, HONDA PCX160
It is an excellent product as expected.
I bought it after a lot of research. I installed it on a PCX125, but I was a little nervous because I did not know that the bar end could not be used as standard. (Sweat) The position can be raised a little to make it look like a modest onyx w, or lowered to make it look like a low-down position, so it can be enjoyed for a long time. ^ ^ View detail
Fits: YAMAHA SRV250, YAMAHA SR400, YAMAHA FZR400, SUZUKI GSF1200, KAWASAKI ZR-7/S, HONDA Monkey BAJA, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA V-MAX 1200, HONDA MONKEY, HONDA MAGNA50, HONDA DREAM50, HONDA JAZZ, HONDA GORILLA, HONDA APE 50, HONDA APE 100 TypeD, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA XJR1300, YAMAHA XJR1200R
To Accent!
[Color] Clear coating is weak, and the anodized gilt peels off when tightened! View detail
I would have been fine with OEMFender...
When I went through the OEM Fender to get a belt to fix the Seat bag, I found that the OEM Fender was plastic (not weak, but it would flex), so I decided to use the Fender Eliminator Kit, which was also inexpensive.
Probably the most difficult part of the installation is the removal of the OEMFender.
Instruction Manual does not have instructions for removing OEMFender.
However, if you are a do-it-yourselfer, you can remove the Rear Fender when you insert the ETCCard, so you may not have to do so much work (^^;)
The construction itself is solid, so the seat bag can be securely fastened to the belt.
I feel like it could be a little more behind the License Plate, but I am satisfied with the strength of the product.
View detail
Fits: Others , SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, HONDA MONKEY
Super Cub custom changed to Bar handleSpec.
The handlebar height and narrowing were just right, and I thought it would reduce fatigue during long tours, so it was the right choice. View detail
Fits: Others , SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, HONDA MONKEY
It fit well without cable extension. exorcism
Delivery is fast and packaging is always perfect.
It was installed on cb1100ex. It can be installed without cable extension and the position has been improved.
It has risen slightly, but my waist has become more comfortable and the design has become prettier.
I am so satisfied. thank you -------------------------------------------------- -------- Delivery is fast and the packaging is always perfect. It is mounted on the CB1100EX. It can be installed in pure without extending the cable and the position is improved. I climbed a little bit, my waist was comfortable and the design was pretty. I'm so satisfied. thank you Powered by Google Translator
View detail
Fits: SUZUKI GSF1200, KAWASAKI ZR-7/S, HONDA Monkey BAJA, YAMAHA FZR400, YAMAHA SR400, YAMAHA SRV250, YAMAHA V-MAX 1200, YAMAHA XJR400, YAMAHA XJR400R, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRX400, YAMAHA XJR1200R, YAMAHA XJR1300, YAMAHA XJR400, YAMAHA FZ400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT250, SUZUKI GSX400
I replaced it while changing the entire front set!
[How is it used?
Since the entire front set was used from another company, the Top Bridge was also changed and the Stem Nut was also replaced with an aluminum one.
Was the one you received as per Image?
Quality was as good as the Image.
Was the installation difficult?
Easy to install, but Material:For Aluminum, we tightened it carefully to avoid damaging it.
How was your experience with it?
The functional aspect remains exactly the same, but the dress-up effect is outstanding.
It has been a pleasure to run.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
It is ▼Anodized, so the color is likely to fade in the sun, but it is holding up well even if it is exposed to some direct sunlight.
View detail
Fits: HONDA CB1100, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA FTR223, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI ZrX1200ZrX1200 DAEG, SUZUKI RV200 VANVAN, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, Others , YAMAHA TW200, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW225E
Favorite Handlebar
I think this handlebar fits well with TRACKER and Boha Style Custom.
I had purchased the Plating type in the past, but this time I bought the Black one in stock.
View detail
Fits: Others , SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, HONDA MONKEY
good
good View detail
good
good View detail
Knurl process is working.
Although the difference is very slight, the Knurl finish gives the product a much more luxurious texture and feel. View detail
On the GSR750
I chose this product because I like the clean Rear view. I like that it is not cluttered, but it may feel cheap to some people.
The process was easy and uneventful.
The LED Lamp is also beautiful, but the projection to attach the Lamp is a little too large.
If we drive long distances in the rain or on roads with floating dirt, our rear bags and backs will get dirty, but this is unavoidable.
The price is low and it is a good product!
View detail
Mounted on the company's Swallow handle
Since the bar end was replaced with the company's Swallow handle, the bar end was also selected from the company's compatible products with SliderType and Weight.
Installation is general, and is done by attaching it to the end of the Handlebar and tightening the Bolt at the Bar End.
I drove the car after installation and felt very little hand-shaking vibration.
However, since the swallow handle itself is made of steel and is sturdy, it seems that inner weight can be added depending on the handlebar to be installed and the type of car.
As for the Slider function, I haven't tipped it over yet, so it hasn't really worked, but if it does, the Handlebar won't get stuck and around the Stem? I was hoping that it would reduce the Damage of the Stem.
View detail
Excellent quality
Really good quality and nice paint. Does what it says on the tin. You can buy different bar holders and they will fit. Thanks View detail
Fits: SUZUKI GSX250FX, KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR750 RS
Excellent quality
So far all parts I bought from webike are excellent quality, paint and fitment. No problems at all. Fit fork clamps / raisers for vfr 800fi. It is part of the hurricane set. View detail
To replace the Handlebar on a 2021 MT-09SP.
I wanted to do something about my wrist getting sore in the second half of touring. and hanging angle of the handlebar? I wondered if it was a problem with the handlebar's aperture and hanging angle, so I installed this swallow-type handlebar, which was sold exclusively for the car model.
Clutch Cable is a special product for installation (this is Quantity):Before pulling out the old Cable, fix the lever side of the new Cable to the lower end (ClutchCase side) with a Tie Band as shown in the 5th image, so that you can pull out and turn the Cable at the same time. You can kill two birds with one stone.
The OEMClutch Cable is fixed behind the Headlight, so it is a little troublesome to remove the fixation here.
The HandlebarBody can be installed without any particular problems, and our vehicle has the Handlebar Post position lowered by 3cm, but even when installed at the desired angle, it fits without interfering with the LimitTank.
The replaced clutch wire must be secured around the handlebar with a tie band or it will interfere with the meter.
As for the position, it was slightly difficult to raise the Shift Pedal because it was tilted forward so much, so the pedal angle of the Rear Sets was adjusted.
Also, I went on a Touring trip of about 300 km after the Handlebar replacement, and I felt that it turned out well for me because I became more conscious of my Knee grip so as not to hold the Handlebar down.
However, due to the fact that it was my first touring in a month and my usual lack of exercise, I ran out of energy in the latter half of the day and had to hold down the handlebar more often, so my shoulder area was sore the next day.
(The pain in my wrist was the same, so I think it was caused by the way I hold the handlebar.)
Also, this is not an issue with the MT-09SP, which is a NAKED model with a MOTARD or STREETFIGHTER-like position, but when riding on the highway with a headwind or when overtaking, the air resistance is large or it feels like it is going to float. When the air resistance is large or it feels like it is going to float up when there is a headwind or when overtaking at a temporary court speed+α, and when I get down, the high position of the handlebar made it a very hard position to be in.
Lastly, the position of the handlebar is a matter of personal preference, so it is difficult to judge the position of the handlebar from the values on the product page alone without actually seeing it installed.
View detail
Good for dress-up
I bought it because other reviewers said it was good for dress-up purposes, not so much for windproofing. It was a good purchase for my purpose. I am very satisfied with my purchase, View detail
Fits: YAMAHA XJR1200, YAMAHA XJR1200R, YAMAHA XJR1300, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJR400R, YAMAHA XJR400R, SUZUKI INAZUMA400, SUZUKI INAZUMA1200(GSX1200FS), HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
A little easier.
It is not difficult if the NORMAL parts can be easily removed, but I worked on mine with an Impact Driver, and when I was about to give up because it was incredibly hard, the nut suddenly turned and I was able to remove it. If you can remove it, it is not so difficult to replace it.
After installing the parts, I found that the BOLDOR was leaning forward, but after installing these parts, the forward leaning posture became slightly easier. So when I came back from touring, I felt less tired than before. There are various colors to choose from, so I think it is a good idea to match the color of your motorcycle to the BOLDOR as a dress-up. I am very happy with the installation.
View detail
awesome
awesome with my 8' bar on the rebel 500 same quality as the OEM cable this bit here is just for the body of this review to reach > 100 charaters geez View detail
SWCondor Reverse Attachment
I wanted to make it look like a separate handle easily, so I reverse-attached it.
Since it interferes with the tank, I purchased a separate Handlebar Stopper and adjusted the angle to avoid fatigue.
It took a couple of days to get used to it and now it is comfortable.
Corner rings are now easier to put on, I feel more at one with the bike, and wind resistance has been reduced, so it is very comfortable.
View detail