Reviews
Fits: HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 Super Four
Effex EZ-fit bar
I ordered these bars hoping they would be a good fit and upgrade for my cb13 I was not disappointed,they look great with the handlebar brace I have already and on the plus side the holes for the standard switches are already drilled out which makes these an easy going job to change View detail
STD Handlebar with a little seasoning is very good
My DAEG uses an antlion Fit barClamp, but with the EZ-FIT Bar, the height is about 20mm higher than the NORMAL bar and about 12mm to 15mm higher than the NORMAL bar, which makes the riding position much easier.
I guess it depends on the individual, but RightSwitch's Harness is quite full.
View detail
I can't tell much difference, but I can handle it comfortably!
[How is it used?
Position was a little tight in NORMAL, so I subtly changed it to Quantity.:I replaced it with a Handlebar that SetBack.
Was the one you received as per Image?
I used a Plated Steel Handlebar so I can't really tell the difference from NORMAL, but the EFFEX Sticker changes the atmosphere.
Was the installation difficult?
It is easy to remove the STD Handlebar, but it was difficult because the Grip was sticking.
It is better to set up a new Grip. It is also a good idea to set up a new Bar End.
How was your experience with it?
I couldn't tell much of a difference because the differences were really only subtle.
Later, HURRICANE's Quantities:It is much easier to use with SetBackBracket.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
In terms of position, we could hardly experience it.
▼We replaced the shorter Bar End with a shorter Bar End along with the Handlebar, so it was a little dangerous due to the shorter width at the time of inspection. It was safe to go to the end to the end of the *Lever.
View detail
Just fit enough to be called a grom exclusive.
The gold front fork and the gold handlebar match each other in line and color. View detail
The color is perfect with Front fork.
It is good to get Normal position. View detail
Good to know
Good thing there is a Switch hole. View detail
easy to ride
It is a very comfortable and safe Position for people with back pain. View detail
Fits: HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 Super Four
Discontinued Hig is equivalent to 30mmUp Spacer?
I used a Gcraft 30mmUp Spacer for about three years because the handlebar on my late Grom JC61 was so low.
It was much better, but I was still riding without feeling 100% comfortable.
By chance, I had a chance to get a discontinued HighType, and I thought it would be good without the Handlebar Spacer. I thought it might be possible to use it without Handlebar Spacer.
We compared the height when we replaced it, and it was still almost the same height as the 30mmUp Spacer4.
It took some time to remove the existing Grip, but I managed to replace the Handlebar and ride it for a bit.
Definitely easier to ride than before!
No matter where I sit on the Seat, I don't have that feeling of being uncomfortably close to the Handlebar!
In other words, it fits tremendously well.
Perhaps it is important that the handlebar is not only raised, but also moved back a little.
I have a long upper body, so High is OK for me, but sometimes I think it could be a little lower. If you have a normal body type that feels the handlebar is too low, I think the current 7mmUp and 7mmBack will be enough to get a good seat position.
View detail
It is safe because it is a car model Exclusive Design.
Replaced OEMHandlebar that was bent in a fall.
Since it is a car model Exclusive Design, it is also safe for Cable and other handling.
View detail
It is large a small portion of normal differed from for a while. Operativity became good. The color chose gun meta in the meaning that only a few asserts KASUTAMU.
It is large a small portion of normal differed from for a while.
Operativity became good.
The color chose gun meta in the meaning that only a few asserts KASUTAMU.
View detail
Fits: HONDA CB400SF Revo[NC42] 08-13, HONDA CB400SB Revo [NC42], HONDA CB400SB [NC39], HONDA CB400SF[NC39]
[Buying motive] Since he wanted to unify the circumference of a handle by Black rather than an improvement of a position, it purchased. [Point which got interested] According to the switch box, although there were many which needs a drilling process,
[Buying motive] Since he wanted to unify the circumference of a handle by Black rather than an improvement of a position, it purchased.
[Point which got interested] According to the switch box, although there were many which needs a drilling process, it was usually charmed by the place that it was easily exchangeable by ending with processing beforehand.
It is also the point that coloring had Black.
Product ] which was seen as the candidate besides [ ! which wants to change a position dramatically is not considered and it is not necessary to change hose simply, and since it was good that it was simply and conveniently exchangeable, there is no product which was seen as the candidate in this time etc.
[After-use comment] It was not like [ worried ], although it was light compared with the pure handle and there was uneasiness in respect of vibration etc. in a handle simple substance.
They are comment which attach the bar end of the company, of course.
From the first, although a position is easy CB, it can operate comfortably.
However, although it was good for a while to attach, since my car body is exchanging for the back step, it has come to be thought that it is a somehow odd posture.
Although it is not bad, I think that I will exchange for the LOW type of the brand in the near future.
[comprehensive evaluation] -- a price -- handiness and attachment -- with all of simplicity and convenience, a comfortable position, and three rhythm -- measure.
It is a recommend at the direction where only a few wants to relieve a position, and Ho something who wants to change the color of a handle.
View detail
Fits: HONDA CB400SF Revo[NC42] 08-13, HONDA CB400SB Revo [NC42], HONDA CB400SB [NC39], HONDA CB400SF[NC39]
Although the amounts of adjustments are only few in every 5 mm and a number, it is quite large by a physical feeling. Since he was CHIBI, the pure handle felt a little distantly, but it became considerably easy when using this. It became easy in s
Although the amounts of adjustments are only few in every 5 mm and a number, it is quite large by a physical feeling.
Since he was CHIBI, the pure handle felt a little distantly, but it became considerably easy when using this.
It became easy in since a leeway was given on the arm also at the time of a right and left chip box.
A cornering is pleasant to say! A motorcycle feels it light.
Since the store was asked for attachment, Yukichi flew, but regret is not carried out.
View detail
HondaTODAYFor Handlebar.
I bought it for HondaTODAY which became Bar handle.
The Handlebar is now UP from the Handlebar I bought before, which makes the riding position easier.
The texture is good for a cheap price.
View detail
redyeing
Down a little as soon as it changed from Gold to Black.
It's not a replacement for the OEM Handlebar so I can't tell the difference, but it's a little up from the OEM so I think it'll be in a better spot.
View detail
Improved appearance and some Position
I didn't like the OEM PlatingHandlebar, so I replaced it with this BlackAluminum Handlebar.
The look is better Parenthesis and the Position is slightly better.
View detail
I thought it would be easier.
He wants something close to NORMAL.
I picked it out.
The texture is good.
I think the price is also cheaper than OEM
Position is
Not much change.
I don't notice.
I think it's getting easier.
View detail
Fits: HONDA CB400SF Revo[NC42] 08-13, HONDA CB400SB Revo [NC42], HONDA CB400SB [NC39], HONDA CB400SF[NC39]
Outstanding quality
It's second time bought this handlebar for my cb400.. Outstanding design and quality, previous bar bent after third time fall of accident.. So its quality and harden material is proven View detail
Car model specific products are reliable.
I ordered the KATANA OEM Parts ProgressiveSlot for my SV650ABS from Webig, and I decided to change the Handlebar as well.
In terms of Position, it is a little change, but it became easier to ride for Large.
The SV650ABS is a slim and compact motorcycle, but the handlebar is a bit too far away for me, so I would recommend it to people like myself who are shorter than the average height of Japanese people and have shorter arms and legs.
As for the grip end, I use a heavy bar end to prevent vibration because I can't use OEM and because I use aluminum handlebar.
View detail
I'm happy enough.
SR400 Type 3 (2008 Carburetor Vehicles) Installed a Chromeplating handle on it.
In my case, STD Handlebar is a little low and I felt that it is a little bit low and I get stiffness in my shoulder when long distance touring, but it is not unbearable. Since I prefer the riding position called forward leaning, I thought that I could keep NORMAL, but I changed to this EFFEX EZ-FIT BAR because I bent the Handlebar in the fall.
The fact that you don't have to replace the Throttle, Clutch, Decompression wire, Brake hose, and electric wire harness is a Large Merit.
I wondered if I would be able to experience the slight change of moving just 5mm up and 5mm forward, but I did. But I feel as if the handlebar came closer just a little bit. During long distance touring, my stiffness in my shoulder is almost gone, which means I can certainly see the difference if I run long distances.
If you are doing a Handlebar replacement, you may be wondering what angle you should mount the Handlebar at. I set the angle at which the Handlebar is closest to my shoulder. Specifically, loosen the Handlebar Bracket so that the Handlebar can rotate, grip the Handlebar and pull it towards your shoulder. I fixed the Handlebar at this angle. In my case, there was no unnaturalness in the opening and hanging angle of the Handlebar End in this state.
Handlebar product photos. EFFEX. There is a logo, but this is a sticker. It's easy to peel off.
View detail
I couldn't use it for Grom (tears).
I bought it on a trial basis to see if it didn't fit the groms. However, Position was too low and too close, and I returned to NORMAL after all. The stability of NORMAL was the best, that it was a waste of money. View detail