Please login to check coupons
Product Detail
Specification
[Size]Width: 705mm
Height: 74mm
Depth (pull): 145mm
Outer Diameter: Φ22.2mm
Inner diameter: 18.2mm
Standing angle: 57 degrees
Aperture Angle: 24 degrees
Stock ratio: 5mm up / 5mm back
[Weight] 900g
[Specification]
Hole machining: Switch hole machined
Clutch Cable (Hose) Fitting: Available
Throttle cable compatibility: Available
Brake hose fitment: Available
[Country of manufacture] Japan
Description
By moving it forward 10mm compared to the normal position, you can get a comfortable position.Designed for specific models.
The design is based on the stock handlebar shape, but the grip part has been shifted in parallel.The angle is the same as the stock one, so you can form a good riding position without damaging the image.
●Original design handle for EFFEX models
Available on large global models such as adventure and cruiser models.The original design handlebars are based on the stock design, but within the reach of the stock hoses and wires for a better riding position.
●No need to replace cables
It is designed for exclusive use of the model, so you don't have to worry about compatibility.
*Depending on the model, it may be necessary to change the minimum cable routing.
*For "High", it may be necessary to replace the cables.
●Switch hole machined
You no longer need to worry about positioning and preparing tools, and you no longer need to spend extra money.
*Some models may not have a switch hole.
●The lever holder can be shifted to the left or right
The mounting straight line is designed to be about 5mm longer.
The grip position of the lever can be fine-tuned.
Bolt-on handlebars for specific models
The design is based on the stock handlebar shape, but the grip part has been shifted in parallel.
The angle is the same as the stock one, so you can form a good riding position without damaging the image.
The design is based on the stock handlebar shape, but the grip part has been shifted in parallel.The angle is the same as the stock one, so you can form a good riding position without damaging the image.
●Original design handle for EFFEX models
Available on large global models such as adventure and cruiser models.The original design handlebars are based on the stock design, but within the reach of the stock hoses and wires for a better riding position.
●No need to replace cables
It is designed for exclusive use of the model, so you don't have to worry about compatibility.
*Depending on the model, it may be necessary to change the minimum cable routing.
*For "High", it may be necessary to replace the cables.
●Switch hole machined
You no longer need to worry about positioning and preparing tools, and you no longer need to spend extra money.
*Some models may not have a switch hole.
●The lever holder can be shifted to the left or right
The mounting straight line is designed to be about 5mm longer.
The grip position of the lever can be fine-tuned.
Bolt-on handlebars for specific models
The design is based on the stock handlebar shape, but the grip part has been shifted in parallel.
The angle is the same as the stock one, so you can form a good riding position without damaging the image.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*The bar ends are not included in the product.*Stock handlebar weights cannot be used, handlebar weights for each type (for aluminum handlebars / for steel handlebars) are available.
*The brake hose and cables do not need to be replaced.
*Stock handlebar ends will not work.
