• Home
  • Product reviews
  • Search reviews
steps-review.png
Filter
icon-webike.png
Write a review and get Webike Points!

Reviews
DID Clear all
VX Series Chain 520VX3 Gold [with Caulk (ZJ) Joint]
DID
VX Series Chain 520VX3 Gold [with Caulk (ZJ) Joint]

Fits: KAWASAKI KLX650SR, HONDA FTR250, HONDA CRM125, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, KAWASAKI Ninja ZX-6R (ZX636), KAWASAKI KLX230, KAWASAKI KDX250SR, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI DR200, YAMAHA XJ6NA, YAMAHA SRX400, YAMAHA MT-03, YAMAHA MT-25, DUCATI MONSTER400 ie DARK, DUCATI MONSTER400 ie, DUCATI MONSTER400 DARK, DUCATI MONSTER400

NO NAME
5/5

Best chain out there

Best chain out there. I bought a more expensive Regina and it was heavier, had more drag, and rusted up fast. These primary drive chains hold up great, look great and minimal drag for an Xring chain I run this chain on all my bikes, they are tough and long lasting. I use the clip master link and never had an issue This chain looks really good on my bike It really cleans up the bikes overall looks and it also doesn't break the bank.the x-rings will add longevity to the life of this chain if I drive through water and mud. View detail

VXSeriesChain 520VX3 Gold [with Crimp(ZJ)Joint]
DID
VXSeriesChain 520VX3 Gold [with Crimp(ZJ)Joint]

Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250

Japanese Webike user
5/5

First time exchange

I heard that a combination of DID and ISA is a good ideaQuantity:Exchange in Set
It feels good to turn well.
The beautiful gold color is beautiful.
Expect durability View detail

Kashimaru #50 Series Set
DID
Kashimaru #50 Series Set

Fits: Others

Japanese Webike user
4/5

First Chain Exchange

First time to exchange Chain, Cut & Kashime without any problem.
But how much Plate press-fit and how much Crimp should I do?
I couldn't make a decision and managed to do so with the help of others. View detail

VR46 Series Chain 520VR / 46 Silver & Gold [Caulk (ZJ) Joint Included]
DID
VR46 Series Chain 520VR / 46 Silver & Gold [Caulk (ZJ) Joint Included]

Fits: MV AGUSTA BRUTALE675, DUCATI scrambler, DUCATI 750F1, DUCATI 750F1, DUCATI 750F1, KAWASAKI KLR650, YAMAHA XJR400R, YAMAHA TZR250, YAMAHA MT-25, KAWASAKI KLR650, KAWASAKI KLE500, KAWASAKI KLE500, KAWASAKI KLE400, KAWASAKI KL600R, KAWASAKI GPz500, KAWASAKI GPZ500, KAWASAKI GPz400S, KAWASAKI GPz400R, KAWASAKI GPz400F/F2, KAWASAKI GPz400

bigbell
5/5

Fast delivery and good product

Delivery arrived quickly
The product looks good too. I bought it much cheaper than buying it domestically, and I think it's good that I can order in detail.
Please continue to supply good products at low prices.
I want to install it quickly. I'm looking forward to seeing what the driving quality will be like --------------------------------------- ------------------- Delivery arrived quickly The product looks good. Please provide a lot of good products inexpensive in the future I want to install it quickly. Powered by Google Translator View detail

VXSeriesChain 530VX3 Steel [with Crimp(ZJ)Joint]
DID
VXSeriesChain 530VX3 Steel [with Crimp(ZJ)Joint]

Fits: HONDA CB1100, HONDA CB1100, HONDA CB1100 type II, HONDA CB1100EX, HONDA CB1100RS, HONDA CRF1100L(Africa Twin), HONDA CB1000R, HONDA CB1100B, HONDA CB1100C, HONDA CB1100D, HONDA CB1100F, HONDA CB1100R, HONDA CB250N, HONDA CB250T, HONDA CB350 Four, HONDA CB400 Four, HONDA CB400AT (HOWK II), HONDA CB400D (SUPER HOWK III), HONDA CB400LC, HONDA CB400N (HOWK III)

Japanese Webike user
5/5

As expected, the world DID

The Chain, which has low mileage but has not been replaced for more than a few decades, is quieter and lighter to push around, and fuel economy has improved by more than 2 km/l.
There is almost no initial elongation even after 3000 km of driving after replacement, and no rusting or sticking without plating just by spraying lube every 500 km of driving, so durability seems to be promising. View detail

VX Series Chain 525VX3 Gold [with Caulk (ZJ) Joint]
DID
VX Series Chain 525VX3 Gold [with Caulk (ZJ) Joint]

Fits: HONDA VFR400Z, HONDA VFR400R, HONDA STEED400 VSE, HONDA STEED400 VLX, HONDA STEED400 VCL, HONDA SHADOW600, HONDA CBR1000RR-R FIREBRADE SP, HONDA CBR1000RR-R FIREBRADE, KAWASAKI Z1000, KAWASAKI VERSYS 1000 SE, KAWASAKI Ninja1000SX, SUZUKI V-STROM650XT, SUZUKI V-STROM650, SUZUKI V-STROM1050XT, SUZUKI V-STROM1050, SUZUKI GSX-R400, KTM LC8 Super moto, HONDA CBR500R, KTM 990 SUPER DUKE, KTM 990 ADVENTURE R

skooby
5/5

Genuine D.I.D VX3 for Yamaha Tracer 900 2018

It was the time to change out the chain and sprockets for Tracer 900 2018. I decided I would go for a VX3 gold chain this time as previously, I have gone with either the chrome or standard finish. I found the correct chain and length by simply checking bike's user manual and that was pretty much it. No need to go on Yamaha parts catalogue as some things, you should just know about the bikes in your household you maintain. Although this is a heavy item, the shipping was pretty good and along with a couple of other small and light parts this worked out really well. I opted for EMS as they were a bit cheaper than my usual Fedex Express. This was already in stock so arrived within like 5 days of ordering. Come on, 5 days from placing the order to arriving at my door in the UK. Brilliant. All the parts in the order were well packed and as I also had a couple of small parts in the order, Webike securely wrapped them individually so even if the chain moved in transit, the smaller parts would not come to harm. I had a quick look at the chain upon arrival and I was speechless. The gold is super nice, it just feels like quality. Why go with anyone else than DID when these guys know exactly what they are doing with chains. All fitted including the front and rear sporockets in less than an hour. This chain looks amazing. I always go to DID for my own bikes and I am pleased with this gold chain. Thank you Webike, great service View detail

Chain & Sprocket 3-point Replacement Kit
DID
Chain & Sprocket 3-point Replacement Kit

Fits: HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF

NO NAME
5/5

Excellent Value For Money

I like to buy excellent products but at good value and this is one of them. I purchased this as my old set of sprocket was well worn. On the way to the workshop to have it replaced, it broke and I became stranded at the side of the road. I had the bike towed and OH MY by the time it was replaced the bike felt like a new bike that rolled off the showroom. The bike became more keen to accelerate, relatively quiet and accelerates smoother. Even the mechanic who worked on the bike complimented it. Another reason that influenced my decision was that this chain and sprocket set was on sale. It an enticing deal waiting to be picked up. I would buy this part all again. View detail

Hanshin Tigers Collaboration Chain Gold & Black [Caulked (ZJ) Joint Included]
DID
Hanshin Tigers Collaboration Chain Gold & Black [Caulked (ZJ) Joint Included]

Fits: APRILIA Caponord 11-16, APRILIA DORSODURO 750 Factory, APRILIA ETV1000 CAPONORD, APRILIA MANA850, APRILIA PEGASO 2 93-96, APRILIA PEGASO 3 97-00, APRILIA PEGASO 90-91, APRILIA PEGASO ie 01-04, APRILIA PEGASO650 STRADA, APRILIA PEGASO650 TRAIL 07, APRILIA RST1000 FUTURA, APRILIA RSV1000, APRILIA RSV1000R DREAM 04-05, APRILIA RSV1000R FACTORY, APRILIA RSV1000R FACTORY, APRILIA RSV1000R FACTORY, APRILIA RSV1000R FACTORY, APRILIA RSV4 R ( FACTORY ) 09, APRILIA RSV4 R APRC ABS, APRILIA RSV4 RF / RR 15-16

Japanese Webike user
4/5

"ARE" Prayer ?

I was looking for other collaboration projects since there was an Evangelion collaboration product, and I found it ? 《Hanshin Tigers collaboration product》, a gold chain with a black mark in a subtle design, I want to replace it before Touring." 2) Praying for victory before we win the league championship yet. It was cheaper!" The number of LINK is 120 and a little long. I also bought Kashimaru-kun with the same product, and I thought I could practice Pin removal with a longer Chain.
Chain is in overall oiled conditionIncluded Parts:. (Chain connection parts and Grease) and comes with a not-for-sale Sticker of the Hanshin Tigers! All that's left is "Kashimarimono" The included grease was sufficient for the replacement and installation work! The included grease was sufficient and the Vinyl bag prevented the chips from sticking when removing the Chain Pin. Remove it from the bag after the work. The remaining items to be checked are (1) Chain life. (2) Hanshin Tigers' Japan Ichi.
When I showed this Chain to my touring friends, they were laughing so hard. View detail

Kashimaru #50 Series Set
DID
Kashimaru #50 Series Set

Fits: Others

Japanese Webike user
4/5

This is it! Well done!

Although it is expensive, it was surprisingly easy to replace the chain when the essentials were grasped and used. The chain I bought was too long, so I cut it with the same number of links.
Cut:Cut the head of LINK with File until there is almost no difference between LINK and Chain. Cut Kashimaru-kun to Quantity:I checked the position of the LINK and Shimamaru-kun and tightened Shimamaru-kun's Screw halfway around to check the position gap. Then, the screw was easily pulled out.
Press-fitting:Apply plenty of grease to the O-ring and surrounding area, and press-fit the plate. When the screw tightening becomes heavy, remove the "Kashimaru-kun" and check the press-fit condition. Check the height of the plate by applying Scale to the next Chain Plate and the press-fit Plate as shown in the photo!
Crimping:Kashimaru-kun is rearranged for Crimping and Crimping begins. After the machine is heavy, check the Crimp condition and confirm that there is not enough Crimp by comparing with the picture in the instruction manual. As shown in the picture, take the side to be crimped in your hand and check the gap between the plate and the crimp. If there is a gap, the Crimp is insufficient. Re-qualify the Crimp.:Set and crimp the screw, and when the screw became heavy, check the crimp condition again and this time it was OK.:The second pc was the same, and I was able to Crimp the second time, so I felt that I did not have to break Kashimaru-kun if I thought about completing the press-in and Crimp in the second time, rather than finishing it in the first time.
After the test run, it was found that there was no problem, and the results were good.
Now that I understand how to use it, I would like to use this Kashimaru-kun for Large things. View detail

SUPER Non-Seal Chain 420NZ3 Gold [with Clip (RJ) Joint]
DID
SUPER Non-Seal Chain 420NZ3 Gold [with Clip (RJ) Joint]

Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, KAWASAKI Z125 PRO, KAWASAKI KX100, KAWASAKI KLX110L, SUZUKI TS50W, HONDA TLM50, HONDA NSR50, HONDA MONKEY BAJA, KTM 65 SX, APRILIA TUONO50, APRILIA RX6V, APRILIA MX, APRILIA 50RS, KAWASAKI KX85-II, KAWASAKI KX85, KAWASAKI KX80-II, KAWASAKI KX80

NO NAME
5/5

chain exchange

hello
I bought and installed this and that on the bike above.
The basic genuine chain doesn't last long and gets stretched quickly.
So I looked into it and ordered it.
I needed an RK chain, but RK was out of stock.
After installing did, there is no noise or chain sound at all when driving.
I guess I'll have to ride it more to find out about durability -------------------------------------------- --------------- hello I bought it and installed it from the above bike. The basic pure chain will increase soon after riding So I found it and ordered it I needed a RK chain, but RK didn't have stock. There is no sound at all when driving after the DID is mounted. I think you have to ride more durability Powered by Google Translator View detail

ER Series Chain 415ERZ Gold [with Clip (RJ) Joint]
DID
ER Series Chain 415ERZ Gold [with Clip (RJ) Joint]

Fits: YAMAHA TZ125, HONDA NSF250R, KTM 50 SX MINI, KTM 50 SX, KTM 50 SX, APRILIA CLASSIC, APRILIA 50RS, SUZUKI CHOINORI, HONDA RS125

Ethan001
5/5

Overall very satisfied so far

About quality and texture: Very nice looking. About the feeling of use: Good product. Products to buy together: make sure u use a chain breaker though. Difficulty of installation: Normal. Cost performance and comparison with other products: Best chain ever worth the money About shipping and packaging: Fast shipped. Any concerns, cautions, or advice when purchasing: Looks good, performs good! View detail

ER Series Joint Link 520ERV7
DID
ER Series Joint Link 520ERV7

Fits: KAWASAKI Ninja ZX-6R (ZX636), YAMAHA YZF-R3, YAMAHA XJ6NA, YAMAHA SRX400, YAMAHA MT-03, MEGELLI Megelli 250R, KTM RC390, KTM 600 LC4, KTM 600 INCAS, KTM 600 GS 4T, KTM 600 ER, KTM 390 DUKE, BMW G310 R, BMW G310 GS, BMW G310 GS, MV AGUSTA F4-BRUTALE 675, APRILIA WIND, APRILIA PEGASO, DUCATI SCRAMBLER, DUCATI SCRAMBLER

Japanese Webike user
5/5

It is purchased with ERV7 for Replacement.

I am able to work with Kashimaru-kun without any problems.
Grease for assembly and seal for replacement are also included in the package, making it easy to use all the necessary parts for replacement work. View detail

VXSeriesChain 525VX3 Steel [with Crimp(ZJ)Joint]
DID
VXSeriesChain 525VX3 Steel [with Crimp(ZJ)Joint]

Fits: SUZUKI GSX-R400, YAMAHA MT-07, HONDA VFR400Z, HONDA VFR400R, HONDA STEED400 VSE, HONDA STEED400 VLX, HONDA STEED400 VCL, HONDA SHADOW600, HONDA CBR1000RR-R FIREBRADE SP, HONDA CBR1000RR-R FIREBRADE, KAWASAKI Z1000, KAWASAKI VERSYS 1000 SE, KAWASAKI Ninja1000SX, SUZUKI V-STROM1050, SUZUKI V-STROM1050XT, SUZUKI V-STROM650, SUZUKI V-STROM650XT, HONDA CBR500R, KTM LC8 Super moto, KTM 990 SUPER DUKE

Japanese Webike user
4/5

Motorcycle is now lighter.

Replacement is easy and effortless with the Chain Cut & Crimp tool.
Tire is lighter when turned by hand.
This is probably because Seal has less resistance than OEM.
Motorcycle push/pull has also been lightened. View detail

VX Series Chain 428VX Stainless Steel [with Riveting (ZJ) Joint]
DID
VX Series Chain 428VX Stainless Steel [with Riveting (ZJ) Joint]

Fits: YAMAHA TT250R RAID, YAMAHA TT250R RAID, YAMAHA TT250R RAID, YAMAHA SRX400, APRILIA RS4 Replica 4T, APRILIA RS4 Replica, KAWASAKI VULCAN II, KAWASAKI VULCAN DRIFTER, KAWASAKI VULCAN CLASSIC, KAWASAKI VULCAN, KAWASAKI KMX200, KAWASAKI KLX125, KAWASAKI KDX125SR, SUZUKI GSX-R125, SUZUKI GIXXER GIXXER 150, SUZUKI GIXXER GIXXER, SUZUKI DJEBEL125, SUZUKI DF125E, YAMAHA XG250 TRICKER (XG250), YAMAHA SEROW(SEROW)250

Japanese Webike user
4/5

Chain replacement

I was able to buy it at about half the price, so it was a big help to me. View detail

VX Series Chain 525VX3 Gold [with Caulk (ZJ) Joint]
DID
VX Series Chain 525VX3 Gold [with Caulk (ZJ) Joint]

Fits: HONDA VFR400Z, HONDA VFR400R, HONDA STEED400 VSE, HONDA STEED400 VLX, HONDA STEED400 VCL, HONDA SHADOW600, HONDA CBR1000RR-R FIREBRADE SP, HONDA CBR1000RR-R FIREBRADE, KAWASAKI Z1000, KAWASAKI VERSYS 1000 SE, KAWASAKI Ninja1000SX, SUZUKI V-STROM650XT, SUZUKI V-STROM650, SUZUKI V-STROM1050XT, SUZUKI V-STROM1050, SUZUKI GSX-R400, KTM LC8 Super moto, HONDA CBR500R, KTM 990 SUPER DUKE, KTM 990 ADVENTURE R

NO NAME
5/5

gold plating

I really like the gold plating. Delivery was a little slower than expected due to customs clearance issues, but I am very happy to have purchased a chain of good quality.
It hasn't been installed yet, but I plan to slowly install it once I purchase the large and small gears.
I think it will go well if you purchase and install the Sunstar large gear -------------------------------------- -------------------- I like gold plating so much. The delivery was a bit slower than I thought due to customs clearance, but I am very happy to buy a good quality chain. It is still mounted, but if you buy waiting and small gear, it will be installed slowly. If you buy a sunstar waiting gear, it will look good. Powered by Google Translator View detail

ZVM-X2SeriesChain 525ZVM-X2 Gold [Crimp(ZJ)Joint included].
DID
ZVM-X2SeriesChain 525ZVM-X2 Gold [Crimp(ZJ)Joint included].

Fits: SUZUKI GSX-S750, YAMAHA YZF-R6, YAMAHA YZF-R1M, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XSR700, YAMAHA TRX850, YAMAHA TDM900, YAMAHA TDM850, YAMAHA MT-10, YAMAHA MT-10, YAMAHA MT-09 To Racer, YAMAHA MT-09, YAMAHA MT-07, YAMAHA FZR400, YAMAHA FZ8, YAMAHA FZ8, TRIUMPH TT600 (TRIUMPH), TRIUMPH TIGER800XC, TRIUMPH TIGER800

Japanese Webike user
5/5

Obviously, it's lighter.

I replaced the VX3, also DID, with this ZVMX2 after about 11,000 km.
I had no complaints with the VX3, but this ZVMX2 clearly spins Wheel lighter than the VX3.

I went on a long touring trip immediately after replacing the Chain, and the highway on the way there was more comfortable than before replacing the Chain. I could feel the lightness of the Chain.

Until then, VX3 had also been well maintained and well wiped with rubs, so I think it is simply a difference in Chain performance.
The price is a little high, but if you consider the replacement of the chain as a custom-made product that improves performance rather than just a replacement of consumable parts, I think it is an inexpensive purchase. View detail

SUPER Non-Seal Chain 420NZ3 Gold [with Clip (RJ) Joint]
DID
SUPER Non-Seal Chain 420NZ3 Gold [with Clip (RJ) Joint]

Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, KAWASAKI Z125 PRO, KAWASAKI KX100, KAWASAKI KLX110L, SUZUKI TS50W, HONDA TLM50, HONDA NSR50, HONDA MONKEY BAJA, KTM 65 SX, APRILIA TUONO50, APRILIA RX6V, APRILIA MX, APRILIA 50RS, KAWASAKI KX85-II, KAWASAKI KX85, KAWASAKI KX80-II, KAWASAKI KX80

NO NAME
5/5

I have received it well

잘받았습니다 ---------------------------------------------------------- I received it well. Powered by Google Translator View detail

Kashimaru #50 Series Set
DID
Kashimaru #50 Series Set

Fits: Others

Japanese Webike user
5/5

Well made product

It was a product that would not be difficult to replace Chain if only I had this.
Chain exchange was so easy that I could remember to use it once.
However, the Gold amount is a bit high. However, the Gold amount is a little high. View detail

Chain & Sprocket 3-point Replacement Kit
DID
Chain & Sprocket 3-point Replacement Kit

Fits: SUZUKI SV650

Yoon jae sik
5/5

After replacing it, it's like a new car.

2019 model SV650A, after driving 17000km, front tires were replaced at 11000km (rear tires were replaced at 11000km), air filter, DID large gear and small gear chain were all worked on.
After replacing the side bag, front foot, and rear footrest, it feels like I'm driving a new car.
good~ ------------------------------------------------ ---------- After driving the 19 -year SV650A 17000km, the front tire (replacing the rear tire 11000km) Air filter DID Waiting Gear Chain After replacing the side back of the side bag, I feel like riding a new car. Good ~ Powered by Google Translator View detail

ZVM-X Series Joint Link 520ZVM
DID
ZVM-X Series Joint Link 520ZVM

Fits: KAWASAKI KLX650SR, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA XJ6NA, YAMAHA SRX400, YAMAHA MT-03, YAMAHA MT-25, KAWASAKI Ninja ZX-6R (ZX636), HONDA NM4-01, HONDA NC750X LD, HONDA NC750X LD, HONDA NC750X LD, HONDA NC750X, HONDA NC750X, HONDA NC750X, HONDA NC750X, HONDA NC750X, HONDA NC750S, HONDA NC750S, HONDA NC750S

Bac Ha
5/5

lool nice and strong

I repalced DID 520ZVM-X gold joint link for black on my Suzuki Hayabusa 1300R. With the DID KM500R toolkit, it took me about 30 minutes to complete, it look nice and strong. View detail