Reviews
Fits: YAMAHA MT03, YAMAHA SR400, YAMAHA SR400, YAMAHA MT-25, YAMAHA MT-03 (2015-)
Good looking and cosy
Vehicle:Ninja 250 (JBK-EX250L)
HURRICANE Handlebar Up Spacer H18 (HB0668B) was installed because "800mm" I chose to use the
750mm was Just size.
According to the *Manufacturer's compatibility chart, even without Spacer (OEMSpec.) 750mm is best, so the presence or absence of this degree of spacer does not seem to affect the length of the Brake hose.
(It can be installed, but it is a little awkward because of the extra length.)
In addition, the banjo bolt has a ACTIVE Banjo bolt, Stainless Steel [GOODRIDGE] (992-03-32C) was used.
The effect on the performance of Brake is only that it seems to have become a little snappier.
I also replaced the Brake Pads (DAYTONA Golden Padχ (97134)) later on.
The Brake Pads may come first if the goal is to improve the touch feeling, since the Brake at that time was more snap-like.
(The initial input of the grip is changed by the Brake hose, and from there on, the change by the Brake Pads is Large.)
View detail
Fits: YAMAHA MT03, YAMAHA SR400, YAMAHA SR400, YAMAHA MT-25, YAMAHA MT-03 (2015-)
Top quality brake line
Bought these for the second time. The first time was type D which is twisted type. I should have bought non twist which is type A. So before purchasing make sure you need which one suits. View detail
Fits: YAMAHA MT03, YAMAHA SR400, YAMAHA SR400, YAMAHA MT-25, YAMAHA MT-03 (2015-)
Cosmo!
I installed it in a car model called X1R of ThailandYamaha
If the angle of Banjo is within the acceptable range, you can use it If you don't, it comes with a Large body
I'd like to use mesh hose, but it's surprisingly expensive!
So, this DAYTONAHigh spec with both Hose and Banjo! I think the line's Brake hose is pretty cosy
Engine Displacement VolumeSmallSmaller motorcycles So it doesn't matter if Brake doesn't work so well in the first place, but
We want to make it look good
View detail
Fits: YAMAHA MT03, YAMAHA SR400, YAMAHA SR400, YAMAHA MT-25, YAMAHA MT-03 (2015-)
I am satisfied.
Since OEM's Brake line currently costs about 5,000 yen, it is better that this one is cheaper. Touch will also tightly. Length is set finely for each car model, you can choose Just size. Banjo bolt's Size is also same 8 mm as OEM, OEM's Bolt can be used as it is.
Replacement work involves exchange of Brake fluid and air bleeding work, so please be sure to leave to the PRO if you are not confident in your work.
View detail
Fits: YAMAHA MT03, YAMAHA SR400, YAMAHA SR400, YAMAHA MT-25, YAMAHA MT-03 (2015-)
Ninja250R Front brake hose
Exchange as Ninja 250 R Front brake hose. Feature of this Hose's Fitting is iron, not Aluminum or Stainless Steel. Banjo bolt (Please use GOODRIDGE Banjo bolt. ), But although I used Washer 2 sheets one by one with OEMBanjo bolt, there is no problem.
The handling of Ninja 250 REMHose is vertically down from the MASTER, but if you put it right under MASTER in the same way, Hose interferes with Front fork. Do not interfere if it goes down at an angle between 4 o'clock and 5 o'clock in the clock.
View detail
Fits: YAMAHA MT03, YAMAHA SR400, YAMAHA SR400, YAMAHA MT-25, YAMAHA MT-03 (2015-)
After all it is Banjo
Easiness of price and Manufacturer named DAYTONA, and purchased with appearance
I installed it in a way to connect Caliper and Caliper to ZZr 400
As for Length, from MASTER to Caliper, there is a feeling that there is some margin at 750 mm between 700 mm Caliper
I exchanged with the Radial master so I can not tell the difference that the difference is Large, but it is the impression that I wondered if it felt completely down
Just as it is written in the explanation about installation, Banjo bolt is a little special, so you need to arrange it separately
There is a Manufacturer such as TTLINE at a certain Yellow color hat Group shop, but please be careful as it can not be installed
View detail
Fits: YAMAHA MT03, YAMAHA SR400, YAMAHA SR400, YAMAHA MT-25, YAMAHA MT-03 (2015-)
Stainless mesh hose is good
Since Brake hose of Front was breaking up, it was trying to replace it and I was trying to buy OEM's Brake hose, but as Mesh's Brake hose hears that Touch gets better I do not put too much price I changed it to Stayless mesh hose of DAYTONA.
I think that installation is easy and I think that even one person will be able to do it, but because it is a part related to the security part called Brake, I wonder if you can leave the worried one to the shop. As the Instruction Manual was also DAYTONA, I was polite and easy to understand.
But I do not know if this is an individual difference or my way of doing something was wrong but I think that Fluid's air did not come off quite easily. In the end it went perfectly, though!
What I'm glad that I changed to Stainless mesh hose is that Brake has become effective from the beginning of grasping after all. And Black Cover near Banjo has a casual daytonaMark and I'm happy to have given Custom feeling as well.
There are not many bad places, but if it says so strongly Brake will be too effective and will cause NoseDive to occur frequently, are not you?
View detail
Fits: YAMAHA MT03, YAMAHA SR400, YAMAHA SR400, YAMAHA MT-25, YAMAHA MT-03 (2015-)
Though I've wanted to have a mesh hose, I was hesitating to buy one for it was quite expensive.I bought this one because I thought the price was appropriate enough for its brand value.My motorcycle (GRAND AXIS 5FA1) was not on the application list
Though I've wanted to have a mesh hose, I was hesitating to buy one for it was quite expensive.
I bought this one because I thought the price was appropriate enough for its brand value.
My motorcycle (GRAND AXIS 5FA1) was not on the application list, but I didn't have trouble installing it.
I know that it shouldn't improve the effect of braking, yet its solid touch gives me a sense of security.
View detail