Reviews
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB500X, HONDA REBEL250, HONDA REBEL250, HONDA FORZA-Z, HONDA FORZA-X, HONDA glom, HONDA glom, HONDA glom, HONDA glom, HONDA VTR, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125
Very convenient
Couplet-on makes it super easy to take out the power supply.
In the case of ADV150, however, it is too narrow to connect to the coupler on the body side only by removing the front side cover, so it is easier to work by removing the cover from the meter and the cover below it.
I tried to force it through the gap, but it was frustratingly difficult to remove the coupler cover. (Lol)
View detail
Versatile!!! Recommended for all!!!!
I used it for Wiring on my Motorcycle navigator...Emon products never fail me!
It's priced so low that it's not even close to failing, so let's just TRY with this product for now!!!
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000F, SUZUKI GSR750, SUZUKI GSX-R1000, SUZUKI GSX-S750, YAMAHA YZF-R1M, YAMAHA YZF-R1 , YAMAHA YZF-R6
Installation itself is easy; Wiring is asked to Sense.
The installation itself is simply a matter of removing the Tandem seat and inserting it into the Stop-lamp Connector. If you want to use the power supply for charging a smartphone or other devices, you need to bring a charging socket or other wiring around the handlebar. It is dangerous because the wiring may be shorted or melted by heat. View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI ST250, SUZUKI katana, SUZUKI GSX-R1000
A product that has impressed me for the first time in a long time.
Attached to take out power from ziix Lap timer.
The wiring is of a perfect length, and a protective tube covers the sharp point on the frame where it is folded over.
This is the first product I have been impressed with in a long time.
View detail
Very convenient
ETC power supply, USB power supply, etc... all the power supply lines of modern motorcycle necessities can be consolidated in one place, so it's neat and tidy. View detail
Fits: KAWASAKI NINJA 650, KAWASAKI ZrX1200 ZrX1200 DAEG, KAWASAKI NINJA 250, KAWASAKI NINJA 250, KAWASAKI NINJA 250, KAWASAKI NINJA 250, KAWASAKI ESTRELLA 250, KAWASAKI VERSYS-X250, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI Z125 PRO, KAWASAKI NINJA 400, KAWASAKI NINJA 400, KAWASAKI NINJA 400, KAWASAKI NINJA 250SL
Can be punched in
I'd like to conclude by saying that this is a great recommendation! It is so easy to take out the power supply!
Don't think about this or that, just pull it on. !!!! My friend was a fan of this product before it came out.
I asked the Motorcycle shop to take out the power supply and it cost me 7,000 yen…
I only need this product! I recommend it highly!
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000F, SUZUKI GSR750, SUZUKI GSX-R1000, SUZUKI GSX-S750, YAMAHA YZF-R1M, YAMAHA YZF-R1 , YAMAHA YZF-R6
For Grip heater power supply.
Easy installation by simply popping it into the harness of the Tail lamp.
The size of the Bullet Terminal and the Grip heater side did not match, so only the Bullet Terminal was replaced.
It's working fine
View detail
Fits: KAWASAKI NINJA 650, KAWASAKI ZrX1200 ZrX1200 DAEG, KAWASAKI NINJA 250, KAWASAKI NINJA 250, KAWASAKI NINJA 250, KAWASAKI NINJA 250, KAWASAKI ESTRELLA 250, KAWASAKI VERSYS-X250, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI Z125 PRO, KAWASAKI NINJA 400, KAWASAKI NINJA 400, KAWASAKI NINJA 400, KAWASAKI NINJA 250SL
Reasonably priced and easy installation
Used on a Ninja 250SL. Easy to install! It's a RECOMMENDATION!!!! View detail
Fits: KAWASAKI NINJA 650, KAWASAKI ZrX1200 ZrX1200 DAEG, KAWASAKI NINJA 250, KAWASAKI NINJA 250, KAWASAKI NINJA 250, KAWASAKI NINJA 250, KAWASAKI ESTRELLA 250, KAWASAKI VERSYS-X250, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI Z125 PRO, KAWASAKI NINJA 400, KAWASAKI NINJA 400, KAWASAKI NINJA 400, KAWASAKI NINJA 250SL
USB power supply accompaniment
When connecting to the Diagnostic Connector, it is not easy to work with, so it is easier to do so after removing the Rear cowl. View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI ST250, SUZUKI katana, SUZUKI GSX-R1000
There was no fit.
Installed on a GSX150BANDIT.
There was no fit, but I was prepared to be a human sacrifice and bought it in the hope that it would be common with the GSX-R125.
The reading was correct and the device was installed and energized without difficulty.
View detail
Very useful
Unlike NAKEDetc., CowlMotorcycle often does not have a space under the seat, so this kind of product is very helpful. It is convenient, but since the unit itself does not open, I wonder what you do when you want to change the fuse. View detail
Convenient
Convenient for taking out power from the Brake.
Red-colored Wiring also has BlackCover, which is inconspicuous and gives a good impression.
View detail
Fits: HONDA REBEL500 , HONDA REBEL 250, HONDA REBEL 250, HONDA REBEL 500, HONDA CB650R, HONDA CBR650R, HONDA CB1000R
Easy to take out the power supply.
I want to install a Grip heater on a 2019 Rebel and add a Bullet Type Terminal.
The installation method is described as a reminder.
If you install it yourself, do so at your own risk.
Installation time:1 hour (except for Grip heater)
Required tools:Ratchet wrench (hex 6mm, 8mm), Curing Tape, Towel
*It is easier to do with less fuel if possible.
Remove the MainSeat (6mm hexagonal).
Protect the tank and frame from direct contact by curing tape, etc.
You can also put Towel or something in between.
Remove the bolt (8mm hexagonal) from the tank.
Lift the Bolt hole of the Tank and remove it from the Frame.
Shift the tank horizontally to the Seat side (just enough to check the bottom of the tank is OK).
Check that the black coupler is attached near where the cords are located on the Right Side (where it is attached).
? Remove the Coupler terminal already attached and install this product so that it is in the middle.
Install Attachment if it is to be installed.
? To put it back in, follow the reverse procedure when removing it.
View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA CRF250L, HONDA CRF250M, HONDA CT125CT110 HUNTER CUB
Clean wiring connections
Simply open the headlights and connect them to the connector to which the wiring will be connected. Mounted to connect the cell phone charging power jack! View detail
Fits: KAWASAKI Z900RS-Cafe, KAWASAKI Z900RS, KAWASAKI NINJAH2, KAWASAKI NINJAZX-10R, KAWASAKI NINJAZX-10R
Fits ZX636G
[How is it used?
I took out the power supply to install a DriveRecorder on my 2023 ZX6R.
How was your experience with it?
ServiceConnector for fault diagnosis under MainSeatQuantity:I found two connectors, one in white and one in black, and the black one seemed to have some power even when the key was off, and the DriveRecorder was running even when the key was off. When I replaced it with the White color, the DriveRecorder did not turn on when the key was off.
I use DriveRecorder by Mistuba Sankowa.
Space under Seat is desperate and needs to be Wiring well.
[Points to note]
If you do not know what is going on, it is better to let PRO handle the electrical system because it can cause malfunctions if handled incorrectly.
View detail
Fits: YAMAHA YZF-R3, YAMAHA MT03, SUZUKI Zixxer 250 SF, SUZUKI Gixxer 250, SUZUKI Gixxer 150., SUZUKI GSX250R, YAMAHA SEROW250, YAMAHA YZF-R3A, YAMAHA YZF-R3A, YAMAHA YZF-R3, YAMAHA YZF-R25A, YAMAHA YZF-R25A, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-25
Easy power removal
[How is it used?
I bought a Harness kit to install a USB power supply on my SEROW250.
It would be easy if I could use a power tap to branch from the 6V MONKEY/GORILLA Main Harness on the car body.
I bought this one because I was not comfortable processing 6V MONKEY/GORILLA Main Harness.
How was your experience with it?
Simply interrupt the Power Extraction Kit between OEMHarnessConnector.
Simply remove the Coupler and wire it up.
How did it compare to other products?
I chose this one because the price was lower than other Manufacturers.
[Points to note]
You should make sure that the coupler is properly wired when you wire it.
After installation, the wiring is interrupted by the wiring around the rear tail lamp.
Check the lighting of Tail lamp and Blinker.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
nothing special
View detail
D-UNIT installation
Installed on ninja250 2018
Easy to manage ACC power supply Purchase at the same time for Grip heater installation
The ACCPower Supply Cable of the body is extended by modifying the Bullet Terminal and cutting the Tail lamp's Wiring and connecting it. The Tail lamp's Wiring is used because the lid does not close when it is removed from the Fuse Box, causing water to enter.
Included Parts:includes parts for the Wiring branch, but these parts are not used because they cause contact failure as they deteriorate over time.
After wiring, WaterproofTube is used to shrink by a lighter flame to make it waterproof.
Fixed with Tie Wrap of Included Parts:in Frame under Seat as there is no installation Space.
It's easy and convenient, considering the time and effort required to prepare and make Relay, etc. by yourself.
View detail
Beware of Bullet Terminal
Bullet Terminal is DAYTONASize!
General Bullet Terminal cannot be connected
I reattached all Bullet Terminals on the D-UNIT side.
Other than that, I am satisfied.
View detail
Fits: HONDA cross-cub 110, HONDA GROM, HONDA CT125
Used in JC75 Grom
Easy power extraction by simply plugging into the Coupler under the Seat
I originally plugged the Cable directly into the Coupler terminal, but I knew I would have to remove it during maintenance.
JC75 would fit better if the Cable part were shorter, but it's a Universal Product.
I am satisfied with Large as a product.
View detail
Fits: YAMAHA XSR700, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900, YAMAHA NMAX155, YAMAHA XSR900, YAMAHA TRACER GT, YAMAHA XSR700, YAMAHA TRACER900, YAMAHA MT-09, YAMAHA NIKEN GT, YAMAHA NIKEN, YAMAHA NMAX, YAMAHA MT-09, YAMAHA MT-09, YAMAHA GDP150A (NMAX150), YAMAHA MT-07, YAMAHA GDP125 A (NMAX), YAMAHA XMAX
Mounted on MT-09 SP 2022MODEL
[How is it used?
I put it on to charge my phone.
Was the one you received as per Image?
Since it is an OEM Product, there were no problems with the manufacturing.
Was the installation difficult?
For MT-09 Sp, remove the Headlight and simply attach it to the Coupler on the Axel side, which fits this product.
However, when AttachmentWiringetc. is used, the space is quite small, so some ingenuity may be required.
Installation itself is relatively simple.
The charging cord side was modified to fit this Connector.
How was your experience with it?
It is convenient because it is easy to get power.
In general, I am satisfied. When adding new power, a new Coupler is required, so be careful there.
View detail