Reviews
To Plug cord
I think it is good enough not to stand out badly even if I put it on the vehicle. Quantity at this price because the letters can be lost by dirt unexpectedly.:2 Set is appreciated. View detail
Softer than OEM
It is softer than OEM so it is easy to handle. I put Nitrile Bond on the coil side. Durability is still to be seen. View detail
Simple
I installed it on GSX250 KATANA.
The length is also Exactly.
Now it would be nice to have a choice of colors.
View detail
Fits: Others , YAMAHA SR500, YAMAHA TTR125, YAMAHA TW125, YAMAHA TW200 E, YAMAHA TW200, YAMAHA YB-1, HONDA MONKEY, HONDA XR100R, HONDA XR50R, HONDA XR70R, KAWASAKI 250TR, SUZUKI DF125, SUZUKI RV200 VANVAN, YAMAHA MAJESTY 250 (4HC) SV, YAMAHA MAJESTY 250 (4HC), YAMAHA MAJESTY125, YAMAHA SEROW 225 S, YAMAHA SEROW 225 W, YAMAHA SEROW 225 WE
Recommended Plug cord
I've been using Norology Hot wire for CB1000SF since it was first released!
Product reliability durability performance, proven, so I installed it on my CT125CT110 HUNTER CUB!
It's got more torque and it's even easier to ride!
I recommend it because it's easy to work with and you can feel the power up right away!
View detail
Pams is the way to go?
I bought this product because it is easy to install and I don't have to worry about any problems with the Crimp. View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
เปลี่ยนง่าย ให้สายมายาวสมราคาใช้แล้วรู้สึกถึงความนิ่มนวนในการจ่ายไฟมากยิ่งขึ้น View detail
Fits: その他 , YAMAHA NMAX155, YAMAHA BWS125 series, YAMAHA NMAX125, YAMAHA CYGNUS X, YAMAHA MAJESTYS
I chose it for its looks.
The Instruction Manual had the Data of the performance up.
I replaced the NGK NORMAL looking one without much expectation.
The body and cylinder head cover are blue so it looks good.
Large size is good, but it is a little thick.
View detail
There is nothing special about it.
The OEMCable had deteriorated considerably, so I replaced it.
There is nothing difficult to install. Some vehicles may require a Shim to fix the plug cap, but you will need to consider how to secure it separately. This product is for Cable only.
The deterioration of the ignition system blatantly affects the Engine's Fee Ring, so any Cable that is rusty or cracked should be replaced immediately.
Even if it runs 30,000km, there is no problem at present. It seems to have a long life span.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI GPz1100, KAWASAKI GPz1100, KAWASAKI ZZR1200, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZX-10, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1100
Expect durability
Of course, since the exchange removes the Fuel Tank, work is Large strange in its own way, but after installation, a custom feeling has been enough in the Plug cord which can be seen peeking from the gap of the Fuel Tank. View detail
Standard Cable
Because blue rust had come out to the Plug cord of BALIUS which was purchased by used, I purchased it as for Replacement. (´-ω-)
Although it is described as soft in other Impressions, it is a little firmer than the OEM Plug cord of BALIUS?s Plug cord, and even in a layman's sense, I have the impression that this level of hardness is necessary and sufficient.
I started it up after I installed it and it worked quite normally.
It is a normal, but reliable Manufacturer's Plug cord.
View detail
Fits: SUZUKI GS400E, SUZUKI GS125E KATANA, KAWASAKI VULCAN1600 VULCAN Mean Streak 1600, SUZUKI GS1100, SUZUKI DF200, SUZUKI GS1000E/S, KAWASAKI VULCAN1600 Classic, KAWASAKI EPSILON150, KAWASAKI Z750T (TWIN), KAWASAKI Z750T (TWIN), HONDA MAGNA 50, HONDA BROS650, HONDA BROS650, HONDA BROS400, HONDA FUSION, HONDA FUSION, HONDA FUSION, HONDA GIORNO CREA, HONDA FUSION, HONDA XRV750 AFRICA TWIN
Better than OEM.
Because it became difficult to turn on with Cable of OEM, I updated Plug, but it was no good.
I changed the cable to this and it came on immediately.
In addition, it has a longer lifespan than OEM products.
View detail
Fits: HARLEY-DAVIDSON CVO Fat Bob FXDFSE, HARLEY-DAVIDSON CVO Fat Bob FXDFSE2, HARLEY-DAVIDSON Super Glide EFI FXDI, HARLEY-DAVIDSON Screamin' Eagle Dyna FXDSE, HARLEY-DAVIDSON Street Bob FXDB, HARLEY-DAVIDSON Super Glide FXD, HARLEY-DAVIDSON Super Glide Custom EFI FXDCI, HARLEY-DAVIDSON Wide Glide FXDWG3, HARLEY-DAVIDSON Super Glide Sport EFI FXDXI, HARLEY-DAVIDSON Super Glide T-Sport FXDXT, HARLEY-DAVIDSON Wide Glide FXDWG, HARLEY-DAVIDSON Super Glide Sport FXDX, HARLEY-DAVIDSON Low Rider EFI FXDL, HARLEY-DAVIDSON Low Rider EFI FXDL, HARLEY-DAVIDSON Screamin' Eagle Dyna FXDSE2, HARLEY-DAVIDSON Super Glide FXD35, HARLEY-DAVIDSON Low Rider S FXDLS, HARLEY-DAVIDSON Switchback FLD, HARLEY-DAVIDSON Wide Glide FXDWG2, HARLEY-DAVIDSON Low Rider FXDL
Easy to replace.
Because the surface of the plug cord of NORMAL began to appear cracks by dirt and hardening, I replaced it. Although the performance does not change with NORMAL, I replaced it for the peace of mind before Trouble happens. Because it only replaces it, installation is easy. View detail
Fits: YAMAHA VMAX, HONDA CB1100, HONDA CB1100 R, HONDA CB1100 K, HONDA CB1100 F, KAWASAKI ZEPHYR 400 χ [Zephyr].
It's a solution to summer stalling disease!
I'm such a believer that I put Hot wire on most of the Motorcycles in my possession (lol).
Startability is unchanged with Large, but Axel's response and torque feel is quite different.
Also, the stalling sickness of summer time was gone when I replaced the plug cord, which may have been a degradation of yesteryear!
From a believer's point of view, I'd like to think it's because of Hot wire, but it's hard to say there.
The v-max's plug cord is quite difficult to replace, and I was a little hesitant to do it as a DIY project, so I asked my motorcycle shop to put it on while I was doing the inspection.
View detail
It's working fine.
I felt that the OEM Plug cord (Cap) for the HondaDAXst-50 was getting old and leaking in the rain, so I replaced it with this product that had a good reputation. It's a solid build for the price and currently works fine. I kept the rating at 4 because I'm not sure of its durability, but I think it's a pretty good product. View detail
The product itself is very satisfying because it is priced right and has a NORMAL feel to it.
This time, I'm going to use Votani Coil.
You have to peel off a thin layer of skin to put it on, but this was a bit of a challenge.
It wasn't made that way to begin with.
If it's Uotani, I remember that KIJIMA or something like that is easier to peel.
The outer diameter is 7mm, so no problem (and so is KIJIMA).
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
It's not much, but it's up
I used to ride it without replacement, but it doesn't feel good in high humidity
I could have used a standard one, but I just went with it The installation went well with no problem
It's amazing It has changed like a different vehicle (Maybe it was originally Warsugi?)
It's only one piece of tubing and cap, so you don't have to worry about water proofing it
Plus, STDCoil replacement and blow-by removal for more power!
View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
Stable plug cord!
ZEPHYR750's OEM plug cord was broken and replaced with an NGKPower cable I did
I machined and installed the OEM code Coupler without using an intermediate joint
Compared to the OEMs, the NGK code was thicker and the outer rolls had to be cut down It should have been possible to hold it well on the housing side, but the processing failed and the I reinforced it with SiliconBond to complete it
You can reduce the time and effort by using the intermediate joints The Cable color is Color:Choose Yellow Personally, I'm happy with Match to ZEPHYR
View detail
Fits: Others , HONDA GB400 TT, KAWASAKI ESTRELLA [ESTRELLA] RS, KAWASAKI ESTRELLA [Estrella]., HONDA XR250, HONDA XR250 Baja, HONDA XR250 R, SUZUKI GOOSE350 [GOOSE]., KAWASAKI SUPER SHERPA [Super Sherpa]., KAWASAKI KLX250 SR, KAWASAKI KLX250 R, KAWASAKI KLX250 ES, HONDA XLR250 R, HONDA XLR250 R Baja, HONDA AX-1, YAMAHA SRX600, YAMAHA SRX400, SUZUKI SKYWAVE250 [SKYWAVE]., SUZUKI GRASS TRACKER, SUZUKI DR-Z400S
It is easy to install
The OEM was pretty fucked up, so I bought it as a Power up and Refresh
It's easy to install as it just replaces the original Cable
Although I felt that both the startability and the torque feeling were improved, some adjustments were necessary for the plug as well So that's the only thing that might be a hassle
However, it's worth replacing it if you think of it as Parts that you can feel the power up just by adjusting it there I think
It's a little expensive, but it's worth it
View detail
Fits: SUZUKI INTRUDER400, SUZUKI XN85 TURBO, SUZUKI INTRUDER400, SUZUKI SW-1, SUZUKI GSX1100S KATANA (KATANA), SUZUKI GSX1100S KATANA (KATANA), KAWASAKI Z1000R, SUZUKI GSX1100S KATANA (KATANA), SUZUKI GSX1100E, SUZUKI GSX1100E, SUZUKI GS750, SUZUKI GS750, SUZUKI GS750, SUZUKI GS750, SUZUKI GS650G, SUZUKI GS550, SUZUKI GS550, SUZUKI GS250FW, SUZUKI GS250FW, SUZUKI GS1100
It's a bit expensive, but it's good
Removing the OEM was harder than I thought it would be, so I replaced it
I've installed it on other vehicles in my possession
It was easy to put on and take off as I had hoped
I can't feel the performance improvement because I'm a slow learner, but
I'm very happy with the strength and texture of Silicon, and I'm very happy with Large
Plug cap, and the cord is integrated
The fact that you can choose from 4 colors to match your vehicle is also a good thing
It has a joint
If the OEM is a screw-in type, it can be installed from the root with some modification
View detail
Fits: HONDA X11, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR1100XX SUPERBLACKBIRD
Good
It fits perfectly on my Honda CBR XX super black bird compared to the OEM this is more thicker.it would be much better if the instructions were in English I used Google translate to translate it to english.and the images on the instructions were very clear so it was much easier to install the delivery was very quick too NGK is a good brand and the quality is top notch if you are planning on changing the old cables this is a perfect choice.i was changing my old coils so I thought I would change my coil cables to and this is a good choice I am happy with my purchase View detail