Reviews
![NUCLEON KR-1 CELLi [New ClioN KR-1 Cell i] Protector](https://img.webike-cdn.net/catalogue/images/66546/8059175100291_TS.jpg)
Other than the price, I'm happy!
New Clion Spine Protector has CELevel 2 and CELevel 1. CELevel 1 is also expensive, but it is not something that is rarely repurchased, and I bought CELevel 2 as an insurance policy in case of emergency.
No problems at all with installation.
The weight is heavy for a Single Body, but it is not an issue once the Jacket is attached and worn.
I have attached it to a leather jacket, so it is useless, but with such a mesh structure, it seems that breathability can be maintained even if it is attached to a summer jacket.
My only complaint is the high price….
View detail
![NUCLEON KR-R CELL [New Clion KR-R Cell] Protector](https://img.webike-cdn.net/catalogue/images/66546/8059175100383_TS.jpg)
Alpinestars is still good
I bought it according to the impresion of others.
I'm 168cm tall and have a big belly, but the size "M" means
It was true. My stomach didn't suffer, the Fit feeling, and my back.
It feels optimally designed.
View detail
![NUCLEON KR-CELLi [New ClioN KR-CELLi]](https://img.webike-cdn.net/catalogue/images/52889/6503919-002-fr_nucleon-kr-celli-protector_TS.jpg)
Price is too high.
I had no choice but to purchase the 3SeasonJacketSP-S purchased at another store because it was not equipped with Spine Protector.
AlpineStar's Spine Protector comes in only two varieties, the cheaper of which was purchased.
It is expensive enough to be cheap.
The size of the Protector is EXACTLY the size of the Jacket you plan to wear.
The difference in price seems to be the difference in safety standards, but this is good enough for me.
I think it would be nice to have a low gradeMODEL that could be priced a little lower, although it is something that protects the spine of the Large.
View detail
Fit for Komine Jacket
Since the Soft Type Spine Protector that comes standard with Komine's Jacket is not enough, we considered purchasing the Hard Type.
We chose this product because there were many word-of-mouth that Komine's Hard protector was too firmly and difficult to move.
Protector entered without any problem even with different Manufacturer.
Although the protection may not be as good as that of the Komine product, I am glad I bought it because it clearly feels more protective than the Soft Type and is not as tight.
It is also designed to prevent steaminess and seems to be fine even for summer use.
View detail
As a Protector Upgrade
Even if the insertion opening is small, it is good because it can be rounded off.
I gave it 3 stars for protection because I have never been protected by a fall, but I'm hoping for the best.
View detail
![[John Doe] Back protector for women](https://img.webike-cdn.net/catalogue/images/92907/000000010006-01-l_TS.jpg)
for Ladies is just right.
I bought it to use with the John Doe MotoShirt and Parka, it is for Ladies, but it is ExactlySized for the Shirt and Parka. View detail
8Size can be used for KUSHITANI.
Protector of FluGun found while researching D3O's CELevel2Protector
I saw the Size notation on ECSite's Package photo.
Compared to Panther dough, 7 is small and 8 is large.
But 8 would suit KUSHITANI.
When you buy it, you'll see.
K-2365 AMENITE Jacket
56Design SLASH JACKET
The size is just right for the
So far, TRV044 in Thailand. (48Size) Cut and used to use the "CUT" but I think it is a little thin.
This is easier to put on and take off.
View detail
Lightweight Back Protector for CELevel2
When choosing a riding wear, I think that in most cases, the back protector is common to the manufacturer.
I use it in my Levuit Sand 4. The good thing about this Back Protector is that it is lightweight and soft, so I don't feel any discomfort while Riding. The good thing about this back protector is that it is lightweight and soft, so there is no discomfort while riding.
I opened the Ventilation on the back of the Jacket and it does not feel like it obstructs ventilation.
Compared to AlpineStar and Dainese, the ventilation holes are smaller, but they are superior in terms of softness, light weight, and price. If softness and safety are important, AlpineStar has its own Air Bag Wear, which is becoming a mainstay, but the price of the Air Bag is high.
JapanManufacturer offers CELevel2Back Protector for Komine and RSThailand Chi, but Komine is the Hard Type, which is harder and heavier, while RSThailand Chi is similar to Rev-it.
Photo description below
It is very soft and follows the body.
The four-layer construction allows each piece to move independently, so it does not stick out.
It's well done.
View detail
I failed
The Spine Pad that came with the Jacket was Better than nothing." I chose this one because it is made of Level urethane foam, and I wanted to use a more protective hard type.
The price was reasonable and the size was appropriate, but it turned out that the entrance of the Pocket for Spine Pad on the Jacket was too narrow and the Hard Type would not fit.
The urethane foam one that came with it can be bent so it can be put in and out, but the hard type can't, so it can't be put in the pocket.
I had no choice but to use Ribbon and Safety Pin to attach it to the Jacket lining, I'll try to be a little more creative.
View detail
Feeling of security
Purchased to use with Alpinestars Mesh jacketT-GPIGNITION AIR & Jacket for 3Season T-JAWSv3.
It is lighter and more flexible than I expected, and the fit is good.
The reverse side is also mesh and seems to have good breathability, so it would not be out of place in a mesh jacket.
The size was confirmed on Okada Shoji's site and both jackets were M size and Exactly.
View detail
![[John Doe] Back Protector](https://img.webike-cdn.net/catalogue/images/92907/000000010007-01-l_TS.jpg)
overdo something (speed, exertion, etc.)
I bought it to use with XTMMotoShirt made by John Doe, but it is too large for the ProtectorPocket, and when I force it in, the Pocket seems to be torn.
In addition, the items sent to us had traces of having been opened once and sealed again with Stapler.
View detail
For DAYTONA leather jacket
I bought this for my DAYTONA leather jacket. I also bought one for shoulders, elbows, and chest, and fully equipped it. It feels just right with a T-shirt inside. It is good for spring and fall, and I don't feel tight when I drive my motorcycle. View detail
Best
I felt it fit my body and was comfortable to wear. View detail
I think people who are not Order Made Suit and who are skinny should be careful.
I bought this one with an off-the-shelf connection, but since I am relatively thin in the upper half of my body.
It goes down to the buttocks.
If you're an Order maid and your back is closely fitted under any circumstances, it might be a good idea...
I should have made the Type to be able to hang it over my shoulder, because the moment a gap is created, it falls off.
View detail
It stinks anyway!
I've been using the same type of Protector for shoulders and elbows and have been satisfied with it, so I thought I'd be satisfied with this one too, but it stinks! Anyway, it stinks! When I bought the Shoulder and Elbow Protector, there was no smell at all, but this one smells too bad. The smell is indescribable, oil-based, and I've cleaned it in various ways, but it won't come off. I don't use it because I'm afraid it will transfer the smell to my jacket. Anyway, it smells. If anyone has overcome the smell, please let me know how. View detail
unusually stinky
The moment I opened the bag, I was surprised by the unusual smell.
I also have a Power age Protector for my chest and that was completely odorless, so I was disappointed with this product!
View detail
You were right to replace it.
Bought this for a Protectorfor Replacement of the back of my DEGNER Leather jacket.
Initially, it was equipped with Ureta Type, but we thought about safety and decided to replace it with Hard Type.
The size of each manufacturer is slightly different, and even if the size is good, it is not possible to install due to the insertion hole.
I ended up with the DEGNER (OEM?) RS-8-YE, which is CE Level 2 certified and has a certain degree of bendability and flexibility.
Unlike Urethane, the material is thick and soft, and unlike Hard Type, it feels secure, and I am glad I replaced it.
View detail
OEM make
[How is it used?
I installed it as an insurance policy for myself.
Was the one you received as per Image?
Shorter than Image
How was your experience with it?
I feel more secure.
[Points to note]
None
How did it compare to other products?
This is definitely better than the Sponge product from PeLePera.
Other items that would be helpful
I want it to be a little cheaper.
View detail
Thin, flexible and protective
I bought this to upgrade my KUSHITANIJacket's Protector.
I am worried about the defense in standard Pad, but CEProtector sold by KUSHITANI is concerned about the thickness…
However, when I washed and put away the jacket of the previous Season, I noticed that the pad of the Power age is almost the same shape.
I bought this product
I am happy to have the same thickness as the standard Pad for added protection. The only drawback is that the ventilation is worse?
View detail
Lightweight, Breathable
I chose this product because I was looking for a CE Standard product with Mesh construction.
I bought it for hit-air's YM-for CV, so I chose S Size, Just size, length 39 width 22.
Because the width is narrow, the range of protection is limited, but I think that this one is more universal because the shape of Pocket often becomes unsuitable if it is a large threshold thing of the overhang.
The TPU-like Material is reasonably flexible, so it's easy to put in Pocket.
The SIDE part has been cut out of the shell to make it more flexible, which will reduce the feeling of tappiness even on motorcycles with a forward lean.
The beehive shaped shell is lined with Mesh fabric for excellent breathability.
It is quite light, 240g compared to 390g of YM-CV, and I don't have the feeling that something is hanging on my back anymore.
View detail