Reviews
Radiator core guard
Purchased a Radiator core guard made by R&G for a CBR1100XX. To install, the Radiator Shroud was removed and the Core guard was installed. When installing the core guard, the lower bracket for the bolt stop was not aligned, so I cut it out with a grinder. The core guard is not covered in the middle, but it is safe because it does not hit the tip that rolls up from the front tire. View detail
reduces mud and dirt to oil cooler
About quality and texture : solid stainless steel mesh with good finishing About the feeling of use : feel confident using gixxer oil cooler on the road Products to buy together : none Difficulty of installation : quite difficult due to u have to remove side fairing of gixxer 250 Cost performance and comparison with other products : pricey but worth it for the quality About shipping and packaging : well packaged, fast shipping Any concerns, cautions, or advice when purchasing :none View detail
To Refresh the Fuel Cock.
[How is it used?
I bought a used SEROW225WE Tank, and I bought some Yamaha OEM parts from Webike to refresh the Fuel Cock around the Tank I had been using until then. But since the hose clip was a simple thing (although it is a sufficient part in terms of functionality), I decided to purchase this product to use for a more solid band.
I went to my neighborhood Home center to see if I could find the product I was looking for, but no matter how hard I looked, I couldn't find the product I wanted. Hose Band (screwed in) is not what we are looking for." I was painfully aware of the trend of the times... I guess the demand is low among the public.
Was the one you received as per Image?
The original OEM Clip for Yamaha SEROW225 is a simple needle-gold shaped component, but KIJIMA's Clip is a well-shaped product that gives a sense of security and is just like the Image product.
How was your experience with it?
It is a small but reliable and secure product that fixes Firmly and Hose to the Joint section.
The firmly attached part is tough to install with bare hands except for those who have a strong grip.
[Points to note]
A slight difference in size can be managed by brute force, but too large or too small can be problematic, so do not be in a hurry to measure the outside diameter of the hose before ordering the required number of pieces.
How did it compare to other products?
There are many similarly designed hose clips available from other companies, but all of the Manufacturer's products serve their purpose well (I have never had an inferior product in my hands when it comes to clips).
Other items that would be helpful
Point and hang of installation
As a matter of course, let's pass the Clip through the hose first before jointing the hose.
I'm embarrassed to say that after plugging Hose in the past "Oh, I didn't put Clip in." What a mess.
[ITEMS TO BUY TOGETHER
Depending on the time and circumstances, fuel hoses also deteriorate over time, so if the fuel hose is old and cracked, it should be replaced with a new hose (if the fuel hose is hardened and cracked, a trouble may occur at any time).
[Opinions and requests to Manufacturer
I have a similar Design product available from several companies, "Horse clip" (sometimes) Hose Band. When searching on Webike, the product names are different, such as Search name I was lost in
View detail
Fits: HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S
seeking peace of mind
I had always been a person who didn't mind if the fins were crushed by the Car Wash Brush, but a lumber fell from the Truck on the Tomei and flew toward us.
Although I escaped the difficulty, I bought it because I couldn't wait to get stuck with something like that.
Well, the product itself. If you don't handle it with care, it will bend." about the same intensity, but my mental anxiety is much lessened.
To use an analogy, it's better to walk around with a piece of cloth than to walk around with a kin0ma hanging around.
・・・ . ・・・
View detail
To Motorcycle without CoolantReserver tank!
CRF250RX does not have a Reserver tank for Coolant, so when it falls or boils, Coolant goes out.
If you don't Stack, don't stop, or don't dig, you may not need it, but if you're not a good digger like me, you'll definitely be happier with it.
However, just because it was attached does not mean that it will not overheat, so a cooling fan or similar device will be needed in a timely manner.
The amount of heat generated by the Racer is incredible, I hope Coolant decreases and we don't have Damage、、、、 on the Engine.
This is not a pontoon product, as it requires drilling with a drill. Please be careful about that.
The hose attachment nipple on the drain can be selected either up or down, but this requires drilling a hole in the originally blocked area.
View detail
Love the incorporated stone guard and compact nature of the 3 fin 4 oil line oi cooler
About quality and texture, I can confirm that the quality is great and that the material used is aluminum for the oil cooler with a mixture of silver painted finishes and a blue anodized coating. About the feeling of use, Love the incorporated stone guard and compact nature of the 3 fin 4 oil line oi cooler. By far the best designed and strongest construction oil cooler for the Honda Grom. Products to buy together, Since you are looking to maximize cooling of the engine then the addition of cooling finned covers for the cam cover and valve covers would be ideal to also have in your cart. Difficulty of installation, I can say the fitment of the oil cooler for my installation was easy due to the mounting points incorporated into the upper cross brace that allow for the addition of brackets to attach the oil cooler to the motorcycle very simple. Cost performance and comparison with other products, The pricing of the product is great. You receive an oil cooler that has a superior design and construction for only a small price increase over the introductory priced oil cooler. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: SUZUKI BANDIT400, SUZUKI BANDIT250, SUZUKI BANDIT1200, SUZUKI GSX400, SUZUKI INAZUMA1200(GSX1200FS), SUZUKI GSX400S KATANA, SUZUKI GSX250S KATANA, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSF1200S, SUZUKI GSF1200, SUZUKI GSF1200, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI GSX400
A little bit Large..,
If it were a little more Compact, it would get a perfect score,
Seems a bit Large.
View detail
It was used for the production of the preliminary Tank.
I made a spare tank and used it to take out the Fuel Hose. m6Tap was cut and welded because I was afraid of leakage. View detail
Fits: HONDA CRF250RALLY S, HONDA CRF250RALLY, HONDA CRF250L
It looks sturdy!
I had a feeling that the bracket of the side cover was bent a little after being bumped twice on the Left side (coolant sub tank side) and if I bumped the Right side, the Radiator would be damaged, so I installed the Radiator. The product is made of steel and seems to be sturdy.
I read in your impressions that you had a hard time installing it, but I was able to just pop mine on. I don't know if they have improved it or if it just happened to be a hit.
The upper part uses the OEM bolt (Wrench 8mm) as it is, but the other two bolt positions are replaced with the enclosed Hexagonal Wrench bolt. The installation instruction manual and a small KIJIMA oval sticker were enclosed.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125
Compact cool kit
I was convinced once again after running with the reliable Mukawa Oil Cooler installed. View detail
Very cool
Very cool little temperature gauge. The gauge seems really well built. I find that to be common with Doremi products! It's a nice, but functional, little piece of bling! View detail
Finally!
I like how it comes on when I turn it on. (*^^*)
I don't know what the temperature setting is:??
View detail
Fits: HONDA CB1300SUPER BOLDOR
Gold is also available for CB1300SB/SF!
We had originally considered the Radiator core guard from Carbon stay as a candidate, but since we could not find a delivery date, and the HondaDREAM store that used to carry it had stopped dealing with it, we decided to look for something different from Carbon stay.
I had been considering this product, but after seeing a friend of mine install it and seeing that the Epoxy Logo was yellowing with age, I avoided it, but then HondaDREAM came along,
1) Gold colors are coming out in Spring 2023!
2) Epoxy emblem is now a METAL emblem!
He introduced us to the company.
Especially for SPSpec., the OHLINS front fork and the burnt exhaust pipe of the OEM are a perfect match, so we are recommending it.
The quality of this company was very good, as was inferred from the fact that they also produce other companies' products on an OEM basis, and there were no BALI or other problems.
View detail
The letters "YOSHIMURA" appear to stand out.
The Radiator is of course protective, but the YOSHIMURA letters stand out and are outstanding in terms of style! View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT, SUZUKI KATANA, SUZUKI KATANA, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S1000
YOSHIMURA shines
Not only is the Radiator protective, but the letters YOSHIMURA stand out from behind the cowl, making it outstanding in terms of style. View detail
Fits: HONDA MTX80, HONDA MTX50, HONDA MBX80, HONDA NSRmini, HONDA NS-1, HONDA MBX50, HONDA CRM80, HONDA CRM50, HONDA NSR75, HONDA NSR80, HONDA NSR50, HONDA NS50F
Overhaul
I bought this because I wanted to build parts that would improve the performance of the engine overhaul of my NSR50. The assembly is a bit large since there is some press fitting work to be done. I don't have a hydraulic press, so I'm planning to challenge with Vise.
I don't know when I will be able to ride it, but I am looking forward to it.
View detail
Best value high mount oil cooler for the JB03 Monkey and a highly efficient cooling setup
About quality and texture, I can confirm that the quality is great and that the materials used are aluminum for the oil cooler, banjo fittings and oil tappet cover and steel for the mounting bracket. About the feeling of use, The best value high mount oil cooler for the JB03 Monkey and a highly efficient cooling setup. Takes up very little space with it's compact design and looks great fitted on the motorcycle. Products to buy together, Since you are looking to maximize the cooling of the engine then the addition of cooling finned covers for the camshaft cover and the exhaust valve tappet cover would be ideal to also have in your cart. Difficulty of installation, I can say the fitment of the oil cooler kit was average. The original airbox needs to be removed but other then that the nature of the install and access are easy. Cost performance and comparison with other products, The pricing of the product is great. You receive an oil cooler kit that can be fitted to a original engine with no other addition parts required. There are not too many oil cooler kit for the JB03 Monkey and if compared to the available low and high mount kits, this is priced in the middle. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: SUZUKI BANDIT400, SUZUKI BANDIT250, SUZUKI BANDIT1200, SUZUKI GSX400, SUZUKI INAZUMA1200(GSX1200FS), SUZUKI GSX400S KATANA, SUZUKI GSX250S KATANA, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSF1200S, SUZUKI GSF1200, SUZUKI GSF1200, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI GSX400
Not bad, but,
The hole for the sensor is a little frustrating somehow. View detail
slight dissatisfaction
I'd like it to be a little more Compact. View detail
Fits: SUZUKI GSX-R1100, SUZUKI GSX-R1000, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R400, SUZUKI GSX-R250/R, SUZUKI GSX-R1100, SUZUKI GSX-R1100, SUZUKI GSR250, SUZUKI GOOSE350, SUZUKI GOOSE250, SUZUKI VOLTY, SUZUKI TL1000S, SUZUKI TL1000R, SUZUKI SKYWAVE400 burgman, SUZUKI RF900, SUZUKI RF400, SUZUKI RF400
For Progress2 only
I used to have a multi-temp meter by YOSHIMURA, but it was quite old and hard to see.
I have a new Progress2, but the sensor itself is not compatible. However, the sensor itself is not compatible with the new Progress2 sensor.
The LCD of Progress2 is easy to read, and I was satisfied with it.
View detail