Reviews
Fits: HONDA MONKEY125, HONDA MONKEY125
Efficient and intuitive
It's a stylishly equipped tachometer that motorcycles don't have. When I open the product, there are two instruction manuals and this makes me confused. One is a universal manual and the other is a manual for Monkey125. If you can distinguish the two well, it's not difficult to install. View detail
Air bubbles unavoidable
I bought for 2023 Honda Rebel 1100 - The package comes with 2 set of film of both lens (round odometer and half moon shape engine light), package comes with instruction and the material of the film is good maybe too good of the thickness. (I’ll explain below), I have done film, carbon film wrapped and window tinting myself, this odometer film should be simple and easy as instruction said: 1. Alcohol wipe. 2. Peel half the back sticker and spray with water, 3. Apply to the sticker onto lens and spray water then peel off the back sticker. 4. Use a film squeegee push out the water and air within. Unfortunately, I wasted both set not able to 100% eliminate air bubble, no matter what there is at least 30% air still capture within and if you try too hard you’ll damage the film, I believe the quality of those film it’s too thick couldn’t able to squeeze properl, I even let it sat under the sun for 2 days hopefully it’ll take off the bubble it still remain the same amount… If you not looking for perfection then this might work for you, but I can’t stand the bubble ended peel them all out and threw it in trash. I think for over $15 this should be a nice and easy to use products, is not worth the money. View detail
Fits: KAWASAKI Ninja 1000 SX, KAWASAKI Ninja 650, KAWASAKI Ninja 7 HYBRID, KAWASAKI Ninja e-1, KAWASAKI Versys 650, KAWASAKI Z H2, KAWASAKI Z e-1, KAWASAKI Z650, KAWASAKI Z900, KAWASAKI ZX-10R, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR, KAWASAKI ZX-6R, KAWASAKI Z500 SE, KAWASAKI Z400 SE
It hasn't been delivered yet.
The car is scheduled to be delivered in April, so I haven't applied it yet, but the body is thick and I think it is worth the price. View detail
DRC MeterScreen ProtectiveFilm
Even if air bubbles appear, they will disappear in a few days, making it easy for beginners to apply.
If it fails, it is conscientious because it comes in a two-pack.
View detail
Double-sided tape is weak.
I bought it because I wanted to change the cheap look of the transparent plastic cover of the ZrX1200 DAEG Meter, which I had been interested in for a long time.
The double-sided tape was not very adhesive and peeled right off, so I cut a piece of Ultra Strong Double-Sided Tape for Emon's exterior parts in the size of 5mm?20mm and reattached it. Ultra Strong Double-Sided Tape for Emon's exterior parts, 5mm?20mm in size, and re-cut and reapplied.
I chose G Silver and was personally satisfied with the AluminumMount Meter-like look.
Also, there were a few minor issues, such as a gap in the position of the blinker indicator hole and a slight gouge in the hole for the high beam indicator. This is unfortunate because these are not cheap parts.
View detail
This was required after Inner cowl removal of OEMCowl.
[How is it used?
I removed the in-cowl to improve serviceability during MachineMaintenance after the Sports run,
The Meter cannot hold as it is and is used to prevent this.
Was the one you received as per Image?
Simple structure, but functional enough.
Was the installation difficult?
Once the inner cowl is removed, the Bracket itself is easy to install.
How was your experience with it?
The Meter does not shake due to vibration and is very rigid. Durability is yet to be determined.
[Included Parts:were they on?
Screws necessary for installation were included.
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Originally designed for racing cowl, but can be installed on OEM OuterCowl.
An Instruction Manual was also included and we had no trouble installing it.
View detail
Fits: KAWASAKI ELIMINATOR, KAWASAKI ELIMINATOR SE
It was difficult.
As per other impresarios, it was difficult to stick it on Beauty.
Quantity:The 1pc. eye was in a cruel state and immediately popped.
The second one did not pull the air bubbles out well, but if I continue to re-stick it, Quantity:I gave up because it was in the same condition as the 1pc. eye.
It is functional and will stay that way.
View detail
Fits: KAWASAKI ELIMINATOR, KAWASAKI ELIMINATOR SE
It was difficult.
I had seen other people's impressions and thought it would be difficult, but I still failed.
Quantity:The first pc. fails miserably; the second one is a disappointing failure.
I am using it as it is, but I think it is better than nothing.
View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA Compatible with normal top bridge and aluminum top bridge made by KITACO
Speedometer, which is difficult to read, is now easier to see.
The OEM Meter location is hard to see and the Main key is difficult to find because of the digital tacho attached.
It was difficult to operate, so I changed it while replacing the LightAssy,
Fixing Meter is Material:Since it is only a Rubber Pipe, there is a slight concern about deterioration.
Style-wise, it's generally as I expected, but the key cylinder is a bit exposed.
I'm curious to see if something can be done about it.
View detail
Reads backwards for USA JA65 bikes
This product is fairly easy to install by following the online instructions. Period.BUUUT for the USA JA 65 trails, it will read backwards because our bikes are geared opposite from the rest of the world. It will read neutral 4321 instead of neutral, 1234. In the end after some head scratching, I figured out that I needed to cut the wires going to the magnetic sensor harness That's already installed on the bike and splice the wires by doing trial and error until it read correctly. After that it works perfectly. It will not have an indicator to shift up and they do mention that in the instructions. The harness to the magnet on the trail is very short, so if you're going to cut and splice, I would recommend you get some heat, shrink, connectors, or consider getting an aftermarket sensor that has longer wire. Luckily, I had one of these lying around. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125
MultiDNMeter
I chose Takegawa's DNMeter because I was looking for a replacement for my NORMAL, which does not have a Tachometer. View detail
Fits: YAMAHA MT-07
Meter panel protection
The film thickness is just right and the visibility is good, so I am glad I installed it. View detail
It is covered with scratches.
Installed to protect the Meter panel.
It is unfortunate that Film is so easily scratched and the line scratches are all over just wiping off the dust.
I would like to see an improvement in the Material to make it less vulnerable.
View detail
The best Multifunction gauge for your Honda CT125 Hunter Cub
This gauge is just the best you can buy for your CT125. Think of a useful function and this has it. Clear vision of the gauge as opposed to the factory embarrassment for a gauge. Gear position, ambient temp, oil temp, time, date, speed, lots of alarms and shift light function. This unit is effectively plug and play, apart from calibrating the actual speed, but that's just a case of inputting a few values and your away. Just remove the crappy factory unit, install the new frame for this gauge, install the Super Multi TFT meter, wire up to the factory coil, enter your magic calibration numbers and you're effectively do. I love this, and Webike was excellent to deal with as usual. My preferred supplier of parts for my CT125. Thank you! View detail
One of the best upgrades available for the CT125
About quality and texture, I can confirm that the quality is great and that the material used is ABS (Acrylonitrile Butadiene Styrene) plastic with a matte black finish for the housing and and a monochrome LED screen for the display. About the feeling of use, One of the best upgrades available for the CT125. The larger and brighter display was the main reason for purchasing but this multimeter offers so much more. Products to buy together, The center meter bracket from OPMID would be ideal to also add to your cart to position the multimeter where it looks best. Difficulty of installation, I can say the fitment of the multimeter for my installation was average due to the disassembly required to access all the connections but the YouTube OPMID channel made the process as easy as possible. Cost performance and comparison with other products, The pricing of this product is great. You receive well made and great features multimeter that is cheaper then what is available from SP Takegawa and the all black really suits the CT125. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125
Informative little gauge
Installation is fairly easy with the aid of searching YouTube. Setting wise need some google translate on the instruction manual, which already stated the recommended setting View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125
Simple and multifunctional
I purchased the car before delivery of my JA65 and had it installed at the Shop and delivered.
I guess the Tachometer will increase the Tension.
Gear position is still displayed with a 1TEMPO13 delay, but once you get used to it, it doesn't bother you so much.
The Temperature Sensor is currently used for air temperature, but I would like to buy a dedicated Drain bolt to measure Oil Temperature Meter eventually,
Overall, I am satisfied.
View detail
DRC MeterScreen Protect Film
It is very easy to put it on.
Even if there are some bubbles, they will come out in a few days.
No more worries about scratching.
View detail
Fits: KAWASAKI Z H2, KAWASAKI Z900, KAWASAKI Z650, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650, KAWASAKI Z H2, KAWASAKI Z H2 SE, KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-10R KRT EDITION, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja 650, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 1000SX, KAWASAKI Z650, KAWASAKI VERSYS 650, KAWASAKI Z900, KAWASAKI Ninja ZX-4R, KAWASAKI Ninja ZX-4RR, KAWASAKI Ninja ZX-4RR KRT EDITION
Protection Seat is indispensable for the screen!
I thought it might be unnecessary since the ZX-6R has a Cowl (Screen) to protect the meter and not a touch panel. However, I thought it would be better to protect it just in case, so I had it installed as an option when I purchased the vehicle.
Is the film a little too small for the screen size?
View detail
Fits: HONDA CT125 CT110 HUNTER CUB
Useful to have for CUB beginners!
I have a lot of experience with motorcycles, but this is my first time as a CUB owner and, of course, my first time riding a Rotary Mission.
If you're not constantly aware of what speed you're in, you'll never know.
It's okay to stop and look for Neutral or 1st gear after you've stopped.
When you stop and immediately start moving, you don't have that kind of time to spare... you're in a hurry...
Since I have been wearing it, I am no longer in such a hurry, and I can drive more comfortably because of it!
The installation is not too difficult as long as you follow the instructions in the instruction manual.
If the cowl can be removed, it would be Large sturdy.
View detail