Reviews
Used for DT50Mirror BracketBoots.
I replaced the MirrorBoots on my DT50 because they had deteriorated. To replace the MirrorBoots, remove the screws from the MirrorBoots, remove the MirrorBoots, and install the MirrorBoots. View detail
Fits: YAMAHA TTR125LW, YAMAHA TTR125LWE, HONDA CRF125F, KAWASAKI KLX110
Recommended Handlebar
Product Name
RENTHAL Renthal 7/8-inches Competition Bar 110cc (KLX110・TTR125)
Item Number
G4531
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
30 min.
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
I chose this one because it is supposed to make posture easier during StandingPosition, etc. I also chose this one because I believe in the Brand of Renthal.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
I think it would be easy if switches are installed properly.
How was your experience with it?
I had no idea that just changing the position of the Handlebar would make such a difference. I think it is better to change it.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
Not much, I think Coloring would be nice to have more.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA CR, HONDA CRF, HONDA CRF-X, YAMAHA YZ, YAMAHA YZ-F, YAMAHA WR-F, KAWASAKI KX, KAWASAKI KX-F, KAWASAKI KLX450R, SUZUKI RM, SUZUKI RM-Z, SUZUKI RMX450, Others Wire clutchCompetition model
Click here for LeverCustom
Product Name
ZAP TECHNIX ZAP TECHNIX V2X Clutch Lever
Item Number
Z-7300XS
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
15 min.
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
I chose a clutch that was easy to adjust and this one was easy to find and in stock, so I went with this one.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It is not particularly difficult, but since it is a clutch, be sure to install it properly.
How was your experience with it?
Adjustments are easy to make, and it seems to be adjustable in Race as well. Also, the design is cool.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Match the color.
Product Name
ACERBIS ACERBIS TRI FIT Hand Guard TRYFit
Item Number
AC-16508RD
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
15 min.
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
I was looking for a red hand guard and chose this one because it was highly rated.
Was the one you received as per Image?
It was just like the Image. Cool looking
Was the installation difficult?
It is not difficult because all you have to do is fasten the screws.
How was your experience with it?
I am very satisfied with the product and would recommend it to anyone who is looking for a hand guard.
[Included Parts:were they on?
There were Instruction Manuals for handling Seal, etc.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA DRAG STAR 400, YAMAHA XSR700, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA TRACER900 GT, YAMAHA BOLT, YAMAHA MAJESTY250, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-25, YAMAHA MT-03, YAMAHA MT03, YAMAHA XSR700, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA TRACER900 GT, YAMAHA BOLT, YAMAHA MAJESTY250, YAMAHA MT-07, YAMAHA MT-09
Quality good
Side mirror is good quality, matches the look of my bike. However require to order 2 unit. Each order is only 1 side mirror. Hence, i am required to order 1 more side mirror. View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA TZR250R, SUZUKI RGV250γ, SUZUKI RGV250γ, SUZUKI RGV-Γ250, SUZUKI GSX-R600, SUZUKI GSX-R1000, KAWASAKI ZX-6R, KAWASAKI ZX-10R, HONDA RVF, HONDA NSR250R, HONDA CBR400RR, HONDA CBR250RR, HONDA CBR250R, HONDA CBR150R, HONDA CBR1000RR-R
I replaced the OEM 10 degrees with this 6 degrees.
When the handlebar is turned all the way to the left, the clutch wire is too tight and delicate. I think it does not interfere with driving, but I am not worried about continuing to use it in this condition. I am worried about continuing to use it in this condition, so I have ordered a special order for a slightly longer wire. It's a hassle! I would like the position to be a little more like a rider's position for city driving. It is now as easy to ride as a CBR600RR. View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA YZF-R1, YAMAHA FZ8S, YAMAHA FZ6R, YAMAHA FZ-6S, YAMAHA FJR1300, SUZUKI GSX250R, SUZUKI GSX-R125, SUZUKI GSX-R1000, SUZUKI GIXER SF, SUZUKI GSX-R1000, KAWASAKI ZX-6R, KAWASAKI ZZR1400, KAWASAKI ZX-6R, KAWASAKI ZX-6R
Good texture
I bought it because I liked the texture and design.
The moving part is fixed by Bolt, so it could be loosened by vibration, and it was necessary to carry a tool at all times. In windy conditions, the Motorcycle Cover could push it loose.
I don't put much force on the Arm Up, so the Right Arm was hard to Gap. I also used the seat Gold, but it did not improve much. I don't think it was loose due to weak tightening.
Visibility would depend on the compatibility of the Motorcycle, but I could not see directly behind me on the FAZER.
It is a Cool product and should be used well together.
View detail
![Slender Switch [Flat Seesaw Type]](https://img.webike-cdn.net/catalogue/images/129660/79339_TS.jpg)
Not Standard Size
25.2mm, so it will be sandwiched between the rubber plates.
However, Rubber sticks out, does not pinch properly, etc. Stress builds up subtly.
In the end, I managed to attach it, but I was not satisfied with the wobble, the subtle texture, and the fact that it was rather large for a skimmer Switch.
I think it would be better to use a 22mm size made by NAKA0 with waterproof and wiring processing...
Well, it's too much trouble to replace it, so I'll use it until it breaks.
View detail
Fits: YAMAHA XJR400R, YAMAHA XJR400, YAMAHA V-MAX 1200, YAMAHA SRV250, YAMAHA SR400, YAMAHA FZR400, SUZUKI GSF1200, KAWASAKI ZR-7/S, HONDA Monkey BAJA, SUZUKI GSF750, YAMAHA XJR400, YAMAHA XJR1300, YAMAHA XJR1200R, YAMAHA XJR1200, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRX400, YAMAHA FZR250R, YAMAHA FZ400, SUZUKI BANDIT400
HURRICANE triangular table spindle nut
Exquisite workmanship, cheap price, good materials, beautiful colors, very accurate size, easy to install, and fits perfectly in the car View detail
Fits: HONDA CL250, HONDA CB250F, HONDA CB250R, HONDA CBR250R, HONDA CB125R, HONDA MONKEY125, HONDA glom
I'm writing well.
It's been a while since I bought it, and I thought it was necessary to change it at first, but the more I use it, the more satisfied I am with the dress-up parts. The regular genuine lever was really uncomfortable. It's far from my hand and the lever is thin. It was hard because I kept turning off the bike with the genuine lever, but it's so nice that it's almost gone after changing it. I highly recommend it. View detail
OK
Quantity:I didn't have high expectations because of the price for 2pcs, but the Mirror's image quality is much better than the very cheap Mirror made in China. [Color] Clear
The Mirror part is blurred on the cheap ones, but this one looks as good as the expensive ones like Magical racing, even though it is cheap. The screws are also available in all sizes, including Opposite Thread Screws, so there is a wide range of motorcycle models to be installed. The screws are sturdy and well packaged in a neat box. Even if it breaks down, I will buy it again because it's inexpensive.
View detail
Replacement from OEMMirror
EliminatorOEMMirror was replaced because it was not flattering.
The mirror area is also good and reduces the reflection of LED light.
View detail
Fits: KAWASAKI GPZ1100, KAWASAKI GPZ900R, KAWASAKI NINJA250R, KAWASAKI NINJA400R, KAWASAKI NINJA650, KAWASAKI NINJA650R, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI Z800, KAWASAKI ZEPHYR1100, KAWASAKI ZRX1100, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZX-7R, KAWASAKI ZX-9R, KAWASAKI ZX14R, KAWASAKI ZZR1100, KAWASAKI ZZR1200, KAWASAKI ZZR1400
For NINJA400R
Replaced from NINJA400R OEMBar End.
It is considerably heavier than OEM, so I expect it to reduce vibration when touring or driving at high speeds:??
View detail
Fits: HONDA SUPER CUBC125, HONDA DAX125, HONDA SUPER CUBC125, HONDA MONKEY125, HONDA MONKEY125, HONDA CROSSCUB110, HONDA CROSSCUB110
BALI shaving required
The Normal Throttle has a large pull allowance, so there were times when I had to re-grip it when running at full throttle, but this has not happened since switching to this product. However, this has not been the case since we switched to this product. Also, the Axel does not become too severe due to too high Solo, and the Throttle is now an easy-to-use Large Throttle.
When installing, there was a small BALI (less than 1mm) at the part that fits into the switch box, and when I turned the throttle, it jostled, so I had to shave the BALI and flatten it. It was not a large job, but it took a long time to install because I did not understand the cause at first. I recommend that you shave the BALI before installation.
View detail
Very beautiful Red
I like the design and practicality.
It can reduce finger pinching in the event of a fall.
View detail
Fits: KAWASAKI ELIMINATOR, KAWASAKI ELIMINATOR SE
Cool with good color
Easy to install, easy to grip and firm compared to OEMLever. The result is better than the price. View detail
Fits: YAMAHA TDM900, YAMAHA XJ6, YAMAHA XJ6N, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6
Great
great replacement fits my boom 250cc, you should tottaly get it if u ever break ur brake lever, great item give it a 5 star review View detail
Quantity:Pair (for Left and Right) Purchased at
Quantity:Pair (for Left and Right) This is a duplicate since it was purchased at the For those who have only seen this one.
I had been using another product, but the non-adjustable moving part came loose and the Mirror started pointing the day after tomorrow while running, so I bought a replacement.
I read the Review before purchasing and eliminated any Spec. that were prone to the same symptoms as the previous one.
Mounting is 17mmQuantity:2pc 14mmQuantity:Easy to prepare 2pcs.
*100 points if there is a 17/14mm thin Combination spanner. It can be installed without it.
The arm section is rounded and can be set quite far back depending on its position, allowing rearward visibility without having to point the arm too far outward.
It was also possible to keep the elbows out of the picture even when the usual seating position is in the front.
It can also be folded up and positioned so that its presence is forgotten, as shown in the photo.
The hang should have the notch facing inward as shown in the photo.
It is perfect if you position it when folded before fixing this area.
The only Neck is OffMirror in general, but vibration at high speeds.
No matter what position I bring it to, it is so scared that I can't see behind it.
If it were 60 km/h on a normal road, it would not be a problem and I would not be concerned, but those who use the highway to travel to the forest roads should be careful.
View detail
Poor return of Engine Starter Motor
After a year and a half of use, the return of the Engine Starter Motor was poor and the CellMotor kept turning.
The same thing is written in the review of KIJIMA's Engine Stop Switch, so things seem to be the same.
For now, I did a Silicon spray and it came back, but I'm sure it will reappear after a while.
It is inexpensive, so let's just use it as such. (Laughter)
View detail
Should have bought this first.
I had been using another product, but the non-adjustable moving part came loose and the Mirror started pointing the day after tomorrow while running, so I bought a replacement.
I read the Review before purchasing and eliminated any Spec. that were prone to the same symptoms as the previous one.
Mounting is 17mmQuantity:2pc 14mmQuantity:Easy to prepare 2pcs.
*100 points if there is a 17/14mm thin Combination spanner. It can be installed without it.
The arm section is rounded and can be set quite far back depending on its position, allowing rearward visibility without having to point the arm too far outward.
It was also possible to keep the elbows out of the picture even when the usual seating position is in the front.
It can also be folded up and positioned so that its presence is forgotten, as shown in the photo.
The hang should have the notch facing inward as shown in the photo.
It is perfect if you position it when folded before fixing this area.
The only Neck is OffMirror in general, but vibration at high speeds.
No matter what position I bring it to, it is so scared that I can't see behind it.
If it were 60 km/h on a normal road, it would not be a problem and I would not be concerned, but those who use the highway to travel to the forest roads should be careful.
View detail