Please login to check coupons
Product Detail
Specification
Type: Flat Seesaw TypeThickness: 13.5mm
Maximum Rating :DC12V/15A (180W)
Handle O.D.: φ22.2/φ25.4
Description
Low profile ON/OFF switch, 4 types.
Slim ON/OFF switch with a thickness of 13.5mm (handle clamp type) that can be smartly installed in the car body with a high-class design.
Four switch variations.
Can be clamped to either handle outer diameter φ22.2 or φ25.4.
Slim ON/OFF switch with a thickness of 13.5mm (handle clamp type) that can be smartly installed in the car body with a high-class design.
Four switch variations.
Can be clamped to either handle outer diameter φ22.2 or φ25.4.
Note
Other types are here.
Caution
*Depending on the temperature of the environment in which the device is used, it may not be possible to use the device up to its maximum rating.*When used at high current, the attached wiring may become warm, but this is not abnormal.
*The maximum current value is 15A.The maximum current value does not change even if it is used at 6V.
*Cannot be used with 24V.
*The supplied wiring connector (red) has a current rating of 7A.When using more than 80W, please connect with a commercially available connector or soldering.
*Use the supplied rubber spacer when clamping the handle with an outer diameter of 22.2mm.
*Be careful not to overtighten the screws.Because it is made of resin, there is a possibility that the resin will break if the screw is tightened too much.
*Installation and sizing images are for the button seesaw type.
When requesting an inspection of a product, a receipt or other document that proves the date of sale is always required.