Reviews
Used for Mesh jacketYB2101
I bought a Mesh jacketYB2101, but it didn't have a pad in the chest area only, so after much hesitation with the Hard Type, I bought this one and installed it.
About installation
There is a pocket that can hold a pad, but it seems to be designed to be "just the right size," so it was a little difficult to fit it neatly, but as a result, it fits in Beauty.
Try it on
The material is a little soft because it is urethane, but it makes a Large difference if it is not there. The feeling of security has been increased in the Large width. I am satisfied that I can use the jacket without any discomfort, and it is not difficult to put it on.
View detail
It could be attached to any Jacket.
Breathability is not so desirable, but it is definitely lightweight. It is also good that it can be attached to both summer and winter jackets using Magic tape, so it is economical to use one jacket at a time.
You can't know how protective it is in the event of an emergency until you experience it.
View detail
Yellow cornChest Pad
The Yellow corn chest HardPad is easy to put on and take off, and it feels secure, and at the same time, it can hold a long Wallet, so it can be used as a pocket! View detail
![NUCLEON FLEX PRO Ci] Protector](https://global.webike-cdn.net/photo/impression/2a/2abf92e737336ca15df231acc9f441f7L.jpg)
Lightweight for city driving.
I used it for elf's Jacket.
The size was set to S according to the Jacket size, but there was quite a bit of extra storage space, so I think it would be better to use M or larger if you are for Mens.
The top one is a mesh-like material made of hard urethane foam that often comes as a freebie, and the right one is a solid Protector.
The protection is not as good as the Protector, but it is CE Level 2, so I think it is good for light equipment for casual city driving. However, it is CE Level 2, so I think it is good for light equipment for casual city driving.
As you can see in the close-up image, the breathability is good, so it may be good even in midsummer if you match it with a mesh jacket or the like. As a matter of course, the breathability is obviously better than the stiff ones.
View detail
During the hot summer months
[How is it used?
I had been using a full protector for safety, but in the summer, etc., it is easy to get heat stroke. I was looking for something safe, with good protection, and lightweight. I was also planning to purchase a neck brace, and since it was the same Leatt brace and seemed to go well with it, I bought it at the same time.
I haven't used it in the summer yet, but it is definitely lighter than the Chest Protector I have been using, and the Honeycomb-style Protector allows for better airflow, which is promising in the summer.
The Leatt brace Neck brace also works well with the Leatt brace Neck brace, and I realized that it is better to unify protectors under the same brand.
The price is a little high, but it is the best choice for safety, ventilation, and compatibility with Neck brace.
View detail
Used for Jams Gold BECK-1 Riding jacketM Size
This is a RoughAndRoad Air throughPad, which means that it is not a product that matches JamsGold's Jacket, so you are on your own regarding its use.
Each Size of Pad is
Back Pad, approx. 43 cm (length), 33 cm (width)
Chest Pad, approx. 34.5 cm (length), 16.5 cm (width)
Shoulder pad, approx. 21.5 cm (length), 17 cm (width)
Elbow pad, approx. 27 cm (length), 16 cm (width)
The shoulder and elbow pads are curved and the length is aligned with the curved surface. The shoulder and elbow pads are curved, and the length is adapted to the curved surface.
The material is urethane, so it can be cut.
The Jams Gold BECK-1 Riding jacketM Size allows me to use the shoulder and elbow pads as they are. The back and chest pad had to be cut to fit.
View detail
yellowcornChest Pad
I bought this jacket because my mesh jacket was not equipped with a chest pad, just in case.
I am glad I purchased this product because it is easy to install and it is secure UPPad and a long Wallet can fit in it together.
View detail
I found what I was looking for.
I was looking for a Protector that could be installed under my Off Jersey, and when I found out about this product, I bought it from webike because they had it in stock.
I am 170 cm, 56 kg and have a skinny body type but ExactFit by adjustment.
I feel no discomfort at all while wearing it from morning to evening.
I haven't tried it in midsummer yet, so I don't know if it is hot or not.
It was then worn over innerwear when touring, and was also worn over T-Shirt, T-Shirt, and T-Shirt.
I drove with Outer and it was comfortable too.
Finally, I tried running the circuit wearing KUSHITANI's Leather suit M Size underneath, and I was able to concentrate so much that I forgot I was wearing it.
We have chosen this way because we are sure that the brand is a good choice for protection.
If you are having trouble choosing a Protector, we want you to experience such a sense of discomfort that you will forget you are wearing it.
It's not cheap, even directly from overseas, but it's the best.
View detail
![[Honda X RS TAICHI] Tech Cell Chest Fitting Belt For Protector](https://global.webike-cdn.net/photo/impression/35/35efbbbba377c57e8e01088443ea9f94L.jpg)
I bought it because of how cool it looks.
I purchased the SeparateChest Protector from Thailand Chi to make it independent of Wear.
The CPS-compliant Protector can be attached directly to the Wear, but I was concerned about the Protector dangling when the front is open and the chest portion of the Wear pushing up toward the face when worn, so I decided to make it independent by attaching a Belt.
I didn't like the fact that the OEM product from Thailand has a large logo, so I bought the Honda collaboration one because of its appearance.
I am a firmly type of person and I wear XL for riding wear with a little room to spare, but I am able to wear this band with a little room to spare. Especially the adjustable back is very convenient.
By making the Chest Protector independent, it is possible to move around after getting off the Motorcycle without Stress.
It is very convenient.
View detail
Lightweight and good
It is good because it is not too bulky.
The fit is good.
View detail
![NUCLEON FLEX PRO Ci [New Cleon FLEX PRO Ci] Protector](https://img.webike-cdn.net/catalogue/images/86755/6702121-114-fr_nucleon-flex-pro-ci-protector-right_TS.jpg)
Used for DEGNER Riders
Purchased to replace the Protector that came with DEGNER Riders.
The L size was just right for the M Riders.
View detail
![NUCLEON KR-CELL CiS [New Clion KR-Cell CiS] Protector](https://img.webike-cdn.net/catalogue/images/52889/6702319-3-fr_nucleon-kr-cell-cis-protector_TS.jpg)
If you are thin, you will drop down to your stomach.
I used it on an off-the-shelf Racing suit, but there is a gap in the tummy and it falls down to the bottom of my stomach.
It would be nice if the situation did not allow for a gap in the chest at all times, but this problem would not occur if the Type was shoulder-mounted, so it should have been that way.
View detail
Stack them up to increase defense!
Was the one you received as per Image?
At first glance, it looks like a slightly hard urethane sponge, which may seem a little uneasy to protect from the impact of an accident, but it is certified under the European standard EN1621-3Level 1. [Color] Since it is Clear, the performance is probably guaranteed to a certain extent.
[How did you feel about the Fit?
I usually wear Komine's JK-574 full year touring jacket Rama II, and although this jacket originally had a Chest Protector called SK-689 Inner chest guardSF as Standard Equipment, I have not used it. The SAS-TECChest Protector is a thin plastic and urethane foam protector, so I use it over the SAS-TECChest Protector. I don't end up using the special bag that comes with this product. 2 layers of Chest Protector gives me some pressure when I put on the jacket, but I don't mind it while riding.
How was your experience with it?
The Protector is somewhat stiff when cold, but becomes quite squishy and soft when warmed by body heat. It is good that the Protector fits to the body shape, but I am concerned about whether it can really protect the chest area. Impact "surface" I guess it's fine when you take it in the "point" I feel that it is quite bad when the product is subjected to a The fact that there are holes all over the Protector to ensure ventilation also makes the impact "point" The "M" in the name of the "M" is not supposed to be used in the case of the "M". For this reason, we thought it would make sense to use Komine's PlasticProtector on the front side and this SAS-TECProtector on the lower side (body side).
[Was there anything that disappointed you?
As long as we don't have accidents, we won't be disappointed, so we will strive to have no accidents!
How did it compare to other products?
However, since there was some concern about using it alone, we decided to use it in combination with Komine's Chest Protector by overlapping it on the underside (body side) of the Chest Protector.
View detail
For chest protection.
Since I have Power age Riding jackets for winter, summer, spring and fall, I purchased PA-539, which can be used for all of them.
It seems a bit expensive for the quality.
View detail
Focus on thinness
I was looking for something thin and soft, and after comparing with other manufacturers, I came to this one.
Although it does not say that it is ce acquired, it is said that it hardens when impacted, so we decided that its performance is sufficient.
This is a great product.
All Chest Pads are thick, and if you want a thin one, it is worth considering.
View detail
Relatively thin
[How is it used?
There are not many jackets that have a standard chest protector, so I used to use a separately sold integrated protector, but it was annoying, especially when I took it off.:Pair (for Left and Right) I bought this product in a separate body.
I always wear it when I drive.
Was the one you received as per Image?
It was just as Image.
How was your experience with it?
It is thinner than I expected and feels comfortable to wear.
I don't want to check on the effects.
The time and effort required to take it on and off is the same as with the one-piece system, but it is easier to take it off and hang it on a chair.
[Points to note]
Be sure to wear Chest Protector.
How did it compare to other products?
It is more comfortable to wear and take on and off than an integrated system.
I think it would be more popular if it were cheaper.
View detail
Buy to protect yourself.
I bought a new Ruffolo Jacket and an optional chest pad to protect myself.
This is a stabilizing measure in case of a fall or an accident.
It is better not to use it, but it is an insurance policy in case of emergency.
I think any Rufflo Jacket that is compatible with the chest pad is strong enough to be attached to the Large.
It is hard, light and easy to install.
It looks and feels like it will last forever unless there is an accident.
View detail
SAS-TEC is soft and reduces the pressure on the chest
It is a store purchase but Impression.
[How is it used?
It is worn in a Jacket with a chest ProtectorPocket for summer winter.
How was your experience with it?
SAS-TEC is soft and can be worn without much discomfort because it adapts to the body, and it becomes a pigeon chest when seen from the outside because it becomes a little thicker than HardProtector, but it is whether to allow there.
View detail
It's better than you think.
I bought this for my Mesh jacket. It's not as strong as the Brass Tic, but the fit is excellent. View detail
Light weight for Hard Type
I bought this because the Protector for my Raflo Air Through Parka was too thin and this is an OEM product so it fits perfectly.
Also, it is light for a Hard Type and does not make you feel heavy.
View detail