Reviews
Bolt hole concealment
When the tandem footpeg of the CT125 is removed, the bolt holes are exposed, and if water or other substances get into the holes, they can cause rust. View detail
Fits: YAMAHA XJR400, KAWASAKI ZRX400II, SUZUKI GSX400, SUZUKI INAZUMA400, SUZUKI GSF750, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, HONDA HORNET600, HONDA HORNET250, HONDA VTR250, HONDA VTR TypeLD, YAMAHA XSR700, YAMAHA XJR400R, YAMAHA XJR400, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400FOUR (water-cooled), HONDA CB400SF
Good functionality, actually.
It took a long time to deliver, but first and foremost, Hari Separator's design is cool!
cb400sf has been reborn with Race ish for an aggressive look!
People say it hurts my neck and wrists, but I still like Style so I'm happy with it lol.
Unlike other straight and straight Separate handles, this design is actually good in that it is functional, with many things that can be mounted because of its slightly protruding and hanging upward design.
However, installation is difficult for beginners and requires paying a hefty labor charge at a store.
View detail
License Plate and Fender Clearance good for less vehicles.
The fixed Bolt on the ReflectorReverse side no longer interferes with the Fender. View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR
Refreshing with Slim design
I bought it because I wanted it to look Refreshing and Sexy from the back.
I am quite satisfied with the design, which is slimmer than other products.
I think most of the other companies' products are a little more blobby.
With this product, it seems as if it is integrated with Cowl.
The Instruction Manual was easy to understand and the DIY installation was a breeze.
View detail
Handlebar position changed, brake hose length increased.
The handlebar position of the Yamaha Bolt R-Spec is too far away, so I used the Handlebar Riser 2 Inch and installed the STD Handlebar. (Switch holes in place as they are) 、 2-inches (approx. 5 cm) I brought it to the front, and Position became much easier.
If the handlebar position is moved forward to the 2-inches maximum, when the handlebar is turned to the full Left position, the brake hose (and Accelerator cable) is fully extended and there is no room to spare,
Replace Brake hose with a longer one
・Brake hose joint (this product) Installation
and finally installed this product.
(At the same time, the Accelerator cable was replaced with a 15 cm longer one. HURRICANE:HB6471)
This product is a Joint between Reserver tank and Hose.
Air bleeding of the brake hose is required when installing this product.
This Joint is a Universal Product, so it can be used in a wide range of applications.
I would like to use it in this condition for the time being.
At any rate, the problem is solved and I am satisfied.
View detail
Condor retrofit
I installed it on an ST250E. I tried to adjust the angle so that it would not hit the tank by reversing it, but the opposite side was no mark! The Handlebar Stopper was installed in a hurry and now I am happy with the Handlebar. View detail
HandlebarUp essentials
I had to upgrade my handlebar because the position was getting too tight, but I found this product when I was having trouble getting to the clutch cable. The installation was not difficult and I was able to replace it with the on-board tool. View detail
Position is halfway. if you want to lower footpeg, you should buy Rear Sets...
I bought this product because there were many comments on the Net that the position of the footpeg was not good for footing when the vehicle is stopped. I thought the position was not so bad while driving, but I felt I would get stuck in a very delicate position when I stopped, whether to put my foot down in front of the footpeg or behind it. I felt that the OEM version would be more sturdy if I could get used to it. I immediately returned it to the original. I have seen several reviews with a good feeling, so I guess it depends on your height. I am 167cm. View detail
Amazing retro look
Original parts are the best and through Webike great service. Looks great on the motorcycle and really improves the style. More upright and excellent handling. View detail
Reliable Manufacturer.
When I replaced the BEETTAPER Handlebar, the NORMAL Clutch Cable sagged.
I bought this one because it looked bad.
Above is the length Exactly to Handlebar.
View detail
Fits: HONDA FTR223, Others , SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, HONDA MONKEY
DL1000 V-STROM250 Handlebar replacement
Installed on VSTROM250 。 The handlebar is narrow and has a strong aperture. The width is the same as SEROW, which improves the riding posture. However, the clutch wire and brake hose are tight and the hose guide has to be removed. I have no problem because I use ThailandBand to hold the necessary parts. View detail
Fits: HONDA MONKEY, HONDA MONKEY, Others
It's OK when it's zoomer row!
The width of the handle is moderately narrow based on the Zummer low, so it is comfortable and good when changing directions.
If the low seat is alibal, the position is considerably backward, so the position is more comfortable when the footrest on the rear chassis is installed rather than the front footrest.
It's much lower than the genuine one, but I haven't applied it to the genuine seat frame yet, but I'm satisfied with the price. ----------------------- The handle mob is moderately narrow based on zoomerow, so it is comfortable and good when turning. If the low sheet is ali-ball, the position will go back to the back, so the position of the rear car is installed rather than the front paws. It is much lower than pure, but I haven't applied it to a genuine seat frame yet, but I'm satisfied with the price Powered by Google Translator
View detail
Fits: KAWASAKI NINJA400 (2014-), KAWASAKI NINJA250R
NINJA400 (2018-) Handlebar Up Type (HURRICANE)
[How is it used?
Touring once a week is definitely easier than Separate handle!
Was the one you received as per Image?
As per Image, quality is good.
Was the installation difficult?
I left it to Shop. 16,000-17,000 yen for the labor.
How was your experience with it?
Anyway, it is easy to ride.
[Included Parts:were they on?
There are no deficiencies in Included Parts:, but the Bird end must be purchased separately.
[Was there anything that disappointed you?
None, low stock, so buy early.
View detail
good.
I am a SR400FI user. I purchased it because the length of the clutch cable was tight while using the Hurricane handleset in the past. I have now replaced it with the SR500 genuine up handlebar, but I am using it without exchanging cables. We have a spare for future exchange. ---------------------------------------------------------- SR400FI user. Previously, the clutch cable length was tight while using the hurricane handleset. I am now exchanged with SR500 Genuine Handlebar, but I am using it without a cable exchange. We have extra for future exchange. Powered by Google Translator View detail
ticklish
When installed on a W650 external Handlebar, it feels like it has gone from brung to PullPull.
My wrists felt slightly ticklish throughout.
Better than painful, but I have some concern about what happens to people when this tickle builds up over long distances.
View detail
Commonly usable
I bought it to change back to Black from Mesh.
I was worried about the length of the meter because it is tilted toward the front with the meter 2cm up from the OEM, but it fit just right.
Meter needle wander was also improved.
View detail
MeterUp works well enough.
I bought it to change back to Black from Mesh.
I was worried about the length of the meter because it is tilted toward the front with the meter 2cm up from the OEM, but it fit just right.
View detail
Fits: YAMAHA MT-09, YAMAHA XSR700, YAMAHA XSR900
Yamaha FZ-09 Handlebars
Awesome. Handlebars arrived in 5 days. Product was packaged well. Looks like it will work great with my FZ09. Great service. Will buy from again. View detail
That was good!
I installed this product on my Honda NC750X and RC72. I am short and the position was not good, but I installed this product and it looks good. View detail
Fits: KAWASAKI Z125 Pro, HONDA PCX125, HONDA PCX150, HONDA PS250, HONDA glom, HONDA FAZE, HONDA FAZE Type S, HONDA FORZA Z ABS, HONDA FORZA(MF08), YAMAHA MAXAM, YAMAHA MAJESTY250(SG03J), SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S
Doesn't it look vulgar if it is thick? (This is my personal opinion.)
Well, since it is a Handlebar Brace, you can make no mistake by checking HURRICANE's Web Catalogue and confirming whether you should choose SS or S, and then choose the color. Recently, Handlebar Brace with the same diameter as Handlebar's diameter is also available so that Smartphone Holder, Driver Recorder, ETC, etc. can be easily attached to the Handlebar. (This is my personal opinion).
There are three color choices for Silver:Polished with Chrome plating, Chrome plating on both ends with Cut-out ROD, and Cut-out on all ends. If you don't understand it, it is your problem, not the Catalogue's.
(I wrote all this on my phone, and when I selected "None" at the bottom and chose "My Motorcycle", all the impressions I had written disappeared at once. (I thought I had already selected "☆", but Webike's SE must have made some kind of mistake in setting it up.)
View detail