PAGE TOP

【HURRICANE】Exclusive FAT Swallow Handlebar for MT-09

Product images are for illustrative purposes only and may differ from the actual product.
Price: ฿4,019
Webike Points: 40

    • Select product form:
    • Product number:
    • HB0294B-10

Please select product form first.


Best Selling Products

Product detail

[Specification]

Material: Steel
Pre-drilling Switch
Overall Width: 730mm
Overall Height: 40mm
Pull Back: 65mm
Inner Input (Stop) Angle: 23-degrees
Holder Mounting Effective Width: 135mm
Outer Diameter: Φ28.6
Grip Part Inner Diameter: Φ18mm
with Meter Up Color

[Caution]

*It correspond to 2016 model change.
*It requires side cap separately for handlebar inner diameter ϒ18mm.
*It requires an application for structural change because it replaces over 20 in total width.
*The color of the product on the attached photo is: Black.
*The attached photo of the product is for reference only.

[Description]

It is an exclusive product with a pipe diameter steeped according to each part.
It is a bolt on and compact weight gain position!

Compared measurement to the STD parts position.
35mm Down 75mm Forward
The handle width between the left and right grip end is 35mm narrower. The squeezing angle is plus 5-degrees
It is mounted the meter by the included collar.
It is possible to use the standard cable.
It is possible to mount together with the HURICCANE screen, meter movement bracket.

Applicable Models

Reviews

  • 4.5

    13 Reviews

  • 5

    Perfect

    7

    4

    Very Good

    6

    3

    OK

    0

    2

    Poor

    0

    1

    Very Poor

    0
  • Write a review

    perfect fit on my XSR900 Dont need to make hole for switches Easy to install took me 3 hrs to DIY which is my first time to switching handle bar. But need to buy a set of handle grip and a set of bar end.

    Purchased these for my XSR900 as the stock bars are a bit too upright for me and I didn't want something too aggressive. These are the perfect mix! Gives you a more forward riding position while not compromising comfort. Feels better in the turns and gives the bike a great look, in my opinion. I also liked that they had the holes already drilled for the controls so installation was very straight forward. Very happy with the purchase.

    I got these handlebars for my XSR 900. After doing just over 1K miles with them, I have to say I'm really pleased with this mod. Although you will lose some confort if you go for lower bars, this option sits right in the middle between the standard rise and the extreme position you will get with clip-ons or with the yamaha OEM clubmans (which at least IMO, are too far down). Needless to say the bars look great on the bike and they will improve the sporty feel when riding without hurting your back nor wrists. Another important thing is that they are quite easy to install. The clutch cable needs to be rerouted slightly to avoid being clamped by the forks, but other than that, nothing tricky about these. Note that the inner diameter is different from stock bars so you will need new bar end weights. Also, if you are in the EU, bear in mind that you will have to pay import duties (i think around 50€) at delivery.

    Since NORMAL has height and width, I personally wanted to change it to a Handlebar with a little more Sporty feeling so I bought it.

    The feeling attached was more than I expected with Sporty Position without complaint.
    The only point to worry about is that it is in full lock state that if the thumb on the in side does not hold handlebar, it suits A little painful eye.
    Handlebar has been drilled, Handlebar itself was attached easily, but in 2017 MODEL, to attach the attached Spacer for Meter movement, since Metall Bracket's Bolt is welded so that it can not be removed, it is scraped off Processing is necessary. (However, if you do not process the Front panel before Meter, you will get a gruff on Meter Bracket, so you need to cut it carefully. )
    I do not want to cut the Front panel, so I used POSH Faith Posh Face's Billet Meter Bracket and Universal's Bracket together.
    Since the product was good, I think that if possible we can take measures for the above two points.

    Since NORMAL has height and width, I personally wanted to change it to a Handlebar with a little more Sporty feeling so I bought it.

    The feeling attached was more than I expected with Sporty Position without complaint.
    The only point to worry about is that it is in full lock state that if the thumb on the in side does not hold handlebar, it suits A little painful eye.
    Handlebar has been drilled, Handlebar itself was attached easily, but in 2017 MODEL, to attach the attached Spacer for Meter movement, since Metall Bracket's Bolt is welded so that it can not be removed, it is scraped off Processing is necessary. (However, if you do not process the Front panel before Meter, you will get a gruff on Meter Bracket, so you need to cut it carefully. )
    I do not want to cut the Front panel, so I used POSH Faith Posh Face's Billet Meter Bracket and Universal's Bracket together.
    Since the product was good, I think that if possible we can take measures for the above two points.

    Very pleased with these handle bars. In my opinion the riding position has improved. This item is completely bolt on and fits right in, no modification needed. Overall great product. I do recomend it.

13 reviews View all

Most Viewed Products

【HURRICANE】BOLT Exclusive Handlebar
BOLT Exclusive Handlebar HURRICANE XV950 Star Bolt
【BEET】Racing Low Handlebar
Racing Low Handlebar BEET D-TRACKER125
【DOREMI COLLECTION】Handlebar
Handlebar DOREMI COLLECTION
【EFFEX】EZ-FIT BAR
EZ-FIT BAR EFFEX Z250 (2013-)
【DAYTONA】Ride Bar II (Semi-UP)
Ride Bar II (Semi-UP) DAYTONA GORILLA
【MINIMOTO】Square Narrow Handlebar
Square Narrow Handlebar MINIMOTO GORILLA