Reviews
Fits: Others RX-7X, Others ASTRAL-X, Others ASTRO-GX, Others RAPIDE-NEO, Others XD, Others VECTOR-X
Visibility is stabilized. But it may not be amazingly effective….
This is for products in the color Pink.
The Helmet is RX-7X and the Shield is Yamashiro's EXTRA SHIELD Mirror Red, and while I have no complaints about the Shield, as you can see in the attached photo, the Semi-smoke just makes it a little darker, so the vision is not always clear.
So I tried this product and it makes me see a little brighter; the moment I lower the Shield, my vision is slightly pink, but I am not aware of it immediately. Also, even when stacked with Semi-smoke, it does not seem to darken, and the effect is clearly visible, so I guess the darkness is Plus minus 0.
However, I would say that it is not as good as it could have been, if I may say that it has become dramatically more visible.
View detail
Fits: Others VECTOR-X, Others XD, Others RAPIDE-NEO, Others ASTRO-GX, Others ASTRAL-X, Others RX-7X
These products are welcome.
[How is it used?
Street riding:Closed 8:2
Was the one you received as per Image?
The color was a little different, but no problem.
How was your experience with it?
I think it has good visibility and moderate UV rays CUT.
[Points to note]
There are a variety of Manufacturer and Helmet Spec. so be sure to apply them when purchasing!
How did it compare to other products?
We have colors and Spec. that are not available in OEM.
Point and hang of installation
If you know how to remove and install the Pin Lock Shield properly, there is no problem.
[Opinions and requests to Manufacturer
It would be nice to be able to Appeal more of the goodness of these products.
I think it is easy to use for touring and running meetings.
View detail
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
Daytime use.
Mainly daytime, city driving.
Installation was as easy as OEM.
OEM Mirror shield for SHOEI GT-AirII to OEM installation of this product [Color] My impression after replacing it with Clear,
The light shielding rate is lower than the OEMMirror shield, but it was moderate during the day.
Not used at night yet, but maybe a little.
I had some concerns about the non-OEM part, but overall it was fine.
View detail
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
Dimmable Pin Lock Seat
The color change is much lighter than I expected.
Is there a hit ha Gap? I am sorry to say that there is a Stain-like cloudiness all over and I can't wipe it off.
I understand that it is an Other Brand Product, but it would be nice to change to a darker color.
It is better than NORMALClear with dimming.
View detail
The anti-fogging effect is great!
When installing, static electricity? Dust is called for, so be careful in the working environment!
Visually, there is a space between the Shield and the Seat, so the transparency is not as good as it was before the Shield was installed, and I feel a slight distortion.
However, I am Large satisfied with the performance of the product. It is really nice and safe to not fog up, and I would definitely recommend wearing them, rather than opening the Shield a bit and feeling cold. I am a Glasses user.
View detail
It doesn't fog up!
Fitted on a Simpson Helmet. It will not fog up!
It is the Large size that no longer opens the Shield.
It can't be helped, but since it is not a dedicated product, the frame is in a narrower position than Shield and the view seems to have been reduced.
I'll use the non-fogging Merit as it is since it's Large.
View detail
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
Mounted on Z-7. Perfect.
Mounted on Z-7.
Fitting was perfect and It is easy to install.
I think the price is Reasonable and the Large change is good.
View detail
Fits: Others RX-7X, Others ASTRAL-X, Others ASTRO-GX, Others RAPIDE-NEO, Others XD, Others VECTOR-X
I still prefer OEM.
No araiOEM in stock to try. [Color] I bought Clear
Is the installation stiffer than OEM? It is difficult to align and the gap with the Shield is not easily eliminated....
The feeling of use was cold recently, but araiOEM began to fog up even at temperatures that do not fog up, and it became impossible to run without raising the Shield, so I removed it immediately.
The OEM is a little more expensive, but I was able to reconfirm that OEM is still the best.
View detail
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
Dimming is unpopular. [Color] It's Clear, so it's not a problem.
I bought it because I have increased Shield.
It is more cost-effective than OEM Product.
No problem using it, but the mounting part floated a little.
If you get the chance [Color] I would like to try Smoke or something.
View detail
Anti-fogging effect
Installation is not difficult and easy.
The anti-fogging effect is quite good and does not cause any visibility problems.
I think it is very good because there is no
View detail
Fits: その他 GT-air II, その他 Z-8, その他 NEOTEC II, その他 J-FORCE IV, その他 J-Cruise II, その他 VZ-RAM, その他 CT-Z, その他 SZ-G, その他 F-17, その他 AERO BLADE V, その他 KAMUl-III, その他 SHUMA, その他 RYUKI, その他 EXCEED, その他 AVAND II, その他 A-FORCE RS, その他 G-FORCE SS, その他 FF-COMFORT, その他 A-FORCE RS JET, その他 G-FORCE SS JET
The comfort of forgetting that Shield is foggy
Used for System helmet.
First of all, it is pasted, but it can be pasted after positioning with the included pattern paper.
Rubber packing is attached to the top and bottom of the helmet's shield.
It was necessary to correct the position several times so that the Seat would not hit it when opening and closing the Shield.
This Seat can be reapplied, but if you repeat it too often, you might damage the Seat or the adhesive.
If possible, it would be better to limit repasting to the smallest limit.
When the Shield is opened, the Seat hits the upper Rubber packing and the Seat, so the Seat is affixed much lower.
It still hits a little, but I am able to open and close it anyway.
The anti-fogging effect is excellent.
It is so easy to completely forget that Shield in winter is supposed to be cloudy.
Apply anti-fogging protection every time you use the Helmet and
Still, it was completely free from Stress and danger that clouded over time.
How much better is A.P. RFilter's effectiveness compared to other anti-fog Seat
This is my first time with this Seat so I can't compare.
On the downside, depending on the light, one's face (nose) can be quite visible inside the Shield.
At first I was surprised and thought my view might be obstructed.
Once I got used to it, I didn't mind.
Also, there is a smell of Material for a while, but it will disappear naturally after a few days of use.
The care is said to be peelable and washable, but as mentioned, we don't want to do this too often.
The inside of the Seat is not smooth and is not likely to be wiped with a cloth etc.
I am trying to figure out what to do when it gets dirty.
The Logo printed on the Seat is cool and I feel as if my inexpensive Helmet has been upgraded.
View detail
Fits: Others RX-7X, Others ASTRAL-X, Others ASTRO-GX, Others RAPIDE-NEO, Others XD, Others VECTOR-X
Anti-fogging
We are using Arai rx7x and purchased this product because OEM Product is out of stock.
After use, the Left Side Logo is somewhat obstructing the view, but I think it can be used without problems.
The product is also very effective in terms of feel, so we plan to repeat it, including cosmetics.
View detail
Zenith Pin Lock Seat
I had been thinking about buying a Pin Lock Seat for a long time, but had forgotten about it because of the price, but when I was thinking about what to buy at the Point of webike, I remembered and finally bought it. It was easy to install and it did not fog up and I was satisfied with the large size. View detail
Fits: その他 GT-air II, その他 Z-8, その他 NEOTEC II, その他 J-FORCE IV, その他 J-Cruise II, その他 VZ-RAM, その他 CT-Z, その他 SZ-G, その他 F-17, その他 AERO BLADE V, その他 KAMUl-III, その他 SHUMA, その他 RYUKI, その他 EXCEED, その他 AVAND II, その他 A-FORCE RS, その他 G-FORCE SS, その他 FF-COMFORT, その他 A-FORCE RS JET, その他 G-FORCE SS JET
Not hard and easy to apply
First of all, I cannot evaluate the adhesiveness and durability of the product because it has not been used for a long time.
I got interested in this product and used it for CJ-2Shield, Helmet is JCruise
I had an OEMPin lock, but I saw the performance degradation, so I dared to use a replacement.
As advertised, it is a very flexible material and was easy to apply.
A paper Seat for positioning is included in the product, as well as a protective film for the Seat.
The center line is kindly indicated, so there should be no confusion about the pasting position.
The key is the anti-fog performance, but there seems to be no particular difference from the OEMPin lock, so there are no concerns.
The function "A.P. RFilter" is only used on level ground, so I can't really feel it so far.
It is said to be durable and easy to apply and remove, so expect good Maintainability in the future.
View detail
Fits: Others X-Fourteen, Others GT-air II, Others Z-8, Others NEOTEC II, Others J-FORCE IV, Others J-Cruise II, Others HORNET ADV, Others RX-7X, Others ASTRO-GX, Others RAPIDE-NEO, Others XD, Others VZ-RAM, Others CT-Z, Others SZ-G, Others F-17, Others AERO BLADE V, Others KAMUl-III, Others SHUMA, Others RYUKI, Others EXCEED
Installation is quite difficult.
This is a type of anti-fogging Seat that is not a pin lock but a stick-on type.
The ARAI CT-Z Pin Lock Seat I am wearing is missing (maybe it is an old MODEL and is discontinued?). I am looking for a new pin lock seat for my ARAI CT-Z.
This is why we chose this one.
The effect is decent.
The Shield is attached with adhesive resin that surrounds the Shield, but positioning is quite difficult.
I can re-cover the surface, but I don't want to leave fingerprints on it, so I want to do it in one shot if possible.
There is a pattern that can be used as a guide, but it is quite difficult.
The installation itself is easy, but you need to prepare properly. Be courteous and bold." It is recommended that you stick with it.
Therefore, it may be suitable for dexterous people.
View detail
Fits: その他 GT-air II, その他 Z-8, その他 NEOTEC II, その他 J-FORCE IV, その他 J-Cruise II, その他 VZ-RAM, その他 CT-Z, その他 SZ-G, その他 F-17, その他 AERO BLADE V, その他 KAMUl-III, その他 SHUMA, その他 RYUKI, その他 EXCEED, その他 AVAND II, その他 A-FORCE RS, その他 G-FORCE SS, その他 FF-COMFORT, その他 A-FORCE RS JET, その他 G-FORCE SS JET
dull
I've tried all kinds of anti-fogging Spray, applying it before riding, during the ride, etc., but in the end it still fogged up.
I bought this product this time and I am very surprised that it doesn't fog up.
I've had this fog Win for so long that I don't think I would have ever needed to buy an anti-fog sprayetc.
When installing, clean and dry the Shield and carefully install it so that no Dust or Garbage can get in between. Surprisingly, it was easy to install.
I've used it every day for a while, morning to night, without the anti-fogging Spray.
Areas with fog WIN do not fog up at all.
I'm going to keep using it and see how durable it is.
View detail
Interference with M30 Clear shield
I used it on my M30 Clear shield and it interfered when raising the Shield up.
I thought I had pasted it too far up, so I tried pasting it at the Limit where it interferes with the bottom, but it interferes with the top again, and it opens to open, but gets stuck.
I thought it was Large sturdy because it managed to open, but the adhesive on the stuck part stuck to the Shield and Helmet and left marks even after wiping.
It is too much of a quandary, so I cut off the part that had adhesive on it due to interference and used it once, although the anti-fogging performance will be reduced.
Clear shield does not remove stains and I am thinking of replacing it.
It really sucks. I want my money back for Gold and Clear shield.
View detail
Fits: Others ASTRO-GX, Others RX-7X, Others ASTRAL-X, Others VECTOR-X, Others XD, Others RAPIDE-NEO
Don't expect so much.
It was expected that the change would not be too intense.
It is not responsive unless it is quite clear. I wish it was a little more responsive.
The response itself is slower than expected.
Well, this is how it is.
View detail
Used on a Simpson DiamondBack. It doesn't fog up.
[How is it used?
Used for Simpson DiamondBack.
Purchased this one because Pin Lock Seat is not available.
Was the one you received as per Image?
There was no problem with the image as it was.
almost [Color] Clear, but it looks like it has a little bit of color when you put it on.
How was your experience with it?
As for the anti-fog feature, it is very good.
It was comfortable to use.
As for visibility, the rim is inevitably in view.
This is somewhat concerning in Simpson, where even free visibility is poor.
It is necessary in winter, but it is better not to have it in summer.
I own another Helmet from WINS and have been using it for about 3 years for commuting.
About halfway through the second year, the surface of the fog WIN deteriorated and the visibility became finely wavy.
Depending on the frequency of use, it may be advisable to replace them once every few years.
Adhesion seems fine and has not peeled or fogged up.
[Points to note]
Since it is a universal product, it is slightly smaller than the Shield.
Given the large size of Simpson's Eye Port, this may still be the limit.
If you put it on the upper limit, it may interfere with the opening and closing of the door, so it may be better to leave a little room.
How did it compare to other products?
Pin Lock Seat is also used on another Helmet.
While new, I didn't feel any superiority between Fog Win and Pin lock.
I thought the durability of Fog WIN seemed to deteriorate visibility more quickly.
Pin lock also had a gap early on and sometimes fogged up even after adjusting the Pin, so I can't say for sure.
Point and hang of installation
If you put it too high up, it is prone to interference.
[ITEMS TO BUY TOGETHER
Shield without pin lock support
[Opinions and requests to Manufacturer
I would appreciate it if it were cheaper so that I could easily replace it.
View detail
dull
It was originally included with the Helmet when I purchased it, but because it had some kind of dirt on it, I rubbed it with Tissue and it got scratches on it.
A littleIt is a material that scratches easily, so be careful when handling it.
The effect is as good as any other Pin Lock Seat.
View detail