Please login to check coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See all
RX-7X ARAI
ASTRAL-X ARAI
ASTRO-GX ARAI
RAPIDE-NEO ARAI
XD ARAI
Show more
Product Detail
Specification
Film typeVAS-VPackage Size
Height in mm: 390mm
Width mm: 150mm
Depth mm: 4mm
Weight g: 65g
Description
What is ULOOK?]
Optical products in various fields
Ugin advanced material, a professional optical company, develops
ULOOK is an eyewear brand.
ULOOK Antifog sheet is an anti-fog film that is easy on the eyes. It is a TAC film with a special anti-fog coating applied at a partner factory in Japan, and has functions that take advantage of Ugin advanced material's expertise in the field of optics.
■Product Introduction
(1) New applications of antifog film that are not only anti-fog
In addition to the conventional clear, a total of six color lineups are available: yellow, pink, smoke, dimming, and polarized.
Like high-function sunglasses, they have different functional characteristics depending on the lens color, providing comfortable and clear vision according to the riding situation.
(2) High antifog performance and high durability
High antifog functionality is achieved while improving durability, which has been an issue with conventional antifog films.
(3) Composite materials with Japanese films as core
Prevents shrinkage of the material due to cold and warm temperature differences and maintains proper clearance between the shield and the antifog film.
Technology
Hybrid anti-fogging
[installation instructions]
・Mounting method on the shield
(1) Peel off a little bit of both ends of the protective film attached to the ULOOK.
(2) Attach the side with the silicone seal so that it adheres to the inside of the shield.At this time, insert the mounting part of the ULOOK into the pin on the shield side rather than one side.
(3) With the ULOOK inserted into the pin on one side, spread the shield out until it is flat, also insert the attachment on the other side, and slowly replace the shield.
(4) Attach the shield to the helmet and check that the silicone seal of the ULOOK is adhered to the shield over all.If a gap is observed at this time, adjust the eccentric pin.
[Frequently Asked Questions]
Q: Can it be used repeatedly?
A: This product can be used repeatedly by drying it to restore its anti-fogging performance.
It can be used repeatedly unless it cannot be attached due to deformation.
Q: How do I take care of it?
A: Clean the stain with a soft cloth soaked in anhydrous ethanol.
At this time, avoid sealing and printing areas to remove dirt.
This may cause poor adhesion of the seal and peeling of the printed area.
After cleaning, rinse well under running water, absorb the water with a soft dry cloth, and dry naturally on a flat surface.
Allow it to dry thoroughly before attaching it to the shield.
Q: Polarized model makes it look rainbow-colored
A: Depending on the surrounding environment and physical condition, the vision may appear rainbow-colored due to light interference phenomenon.
If you feel any discomfort during use, discontinue use immediately.
[Examples of Interference Phenomena]
・LCD screens (cell phones, tablets, cameras, in-vehicle monitors, instrument displays)
・Sky, landscape, vehicle body, windshield, etc
Q: Is it safe to leave it attached to the shield?
A: This product should be removed periodically.
If left attached for a long period of time, the seal portion may stick to the shield surface and not be removed.
Q: I would like to test the visibility before purchasing it
A: Experience testers are set up in the stores that handle the product.
Q: Rainwater intrusion during riding in the rain
A: This product can be used repeatedly by drying.
Remove from the shield, absorb the moisture with a soft, dry cloth, and dry naturally on a flat surface until sufficiently dry before attaching to the shield.
(If the product cannot be installed due to deformation, etc., discontinue use.)
Q: There is a gap between the shield and the anti-fog film
A: This product expands and contracts due to moisture absorption and desorption.
This may create a gap between the product and the shield, causing it to rattle.
Before use, check for gaps or rattling between the product and the shield.
Q: I don't know how to install it
A: Please refer to the installation video for installation.
Please refer to your helmet's instruction manual for information on how to remove the shield.
Q: I cannot adjust the position properly
A: Please refer to the installation video and install with the shield further spread out.
Q: Does the dimmer model change color immediately upon entering the tunnel?
A: Color change takes time.
In places where it suddenly becomes dark, such as tunnels, open the shield to ensure visibility.
Optical products in various fields
Ugin advanced material, a professional optical company, develops
ULOOK is an eyewear brand.
ULOOK Antifog sheet is an anti-fog film that is easy on the eyes. It is a TAC film with a special anti-fog coating applied at a partner factory in Japan, and has functions that take advantage of Ugin advanced material's expertise in the field of optics.
■Product Introduction
(1) New applications of antifog film that are not only anti-fog
In addition to the conventional clear, a total of six color lineups are available: yellow, pink, smoke, dimming, and polarized.
Like high-function sunglasses, they have different functional characteristics depending on the lens color, providing comfortable and clear vision according to the riding situation.
(2) High antifog performance and high durability
High antifog functionality is achieved while improving durability, which has been an issue with conventional antifog films.
(3) Composite materials with Japanese films as core
Prevents shrinkage of the material due to cold and warm temperature differences and maintains proper clearance between the shield and the antifog film.
Technology
Hybrid anti-fogging
[installation instructions]
・Mounting method on the shield
(1) Peel off a little bit of both ends of the protective film attached to the ULOOK.
(2) Attach the side with the silicone seal so that it adheres to the inside of the shield.At this time, insert the mounting part of the ULOOK into the pin on the shield side rather than one side.
(3) With the ULOOK inserted into the pin on one side, spread the shield out until it is flat, also insert the attachment on the other side, and slowly replace the shield.
(4) Attach the shield to the helmet and check that the silicone seal of the ULOOK is adhered to the shield over all.If a gap is observed at this time, adjust the eccentric pin.
[Frequently Asked Questions]
Q: Can it be used repeatedly?
A: This product can be used repeatedly by drying it to restore its anti-fogging performance.
It can be used repeatedly unless it cannot be attached due to deformation.
Q: How do I take care of it?
A: Clean the stain with a soft cloth soaked in anhydrous ethanol.
At this time, avoid sealing and printing areas to remove dirt.
This may cause poor adhesion of the seal and peeling of the printed area.
After cleaning, rinse well under running water, absorb the water with a soft dry cloth, and dry naturally on a flat surface.
Allow it to dry thoroughly before attaching it to the shield.
Q: Polarized model makes it look rainbow-colored
A: Depending on the surrounding environment and physical condition, the vision may appear rainbow-colored due to light interference phenomenon.
If you feel any discomfort during use, discontinue use immediately.
[Examples of Interference Phenomena]
・LCD screens (cell phones, tablets, cameras, in-vehicle monitors, instrument displays)
・Sky, landscape, vehicle body, windshield, etc
Q: Is it safe to leave it attached to the shield?
A: This product should be removed periodically.
If left attached for a long period of time, the seal portion may stick to the shield surface and not be removed.
Q: I would like to test the visibility before purchasing it
A: Experience testers are set up in the stores that handle the product.
Q: Rainwater intrusion during riding in the rain
A: This product can be used repeatedly by drying.
Remove from the shield, absorb the moisture with a soft, dry cloth, and dry naturally on a flat surface until sufficiently dry before attaching to the shield.
(If the product cannot be installed due to deformation, etc., discontinue use.)
Q: There is a gap between the shield and the anti-fog film
A: This product expands and contracts due to moisture absorption and desorption.
This may create a gap between the product and the shield, causing it to rattle.
Before use, check for gaps or rattling between the product and the shield.
Q: I don't know how to install it
A: Please refer to the installation video for installation.
Please refer to your helmet's instruction manual for information on how to remove the shield.
Q: I cannot adjust the position properly
A: Please refer to the installation video and install with the shield further spread out.
Q: Does the dimmer model change color immediately upon entering the tunnel?
A: Color change takes time.
In places where it suddenly becomes dark, such as tunnels, open the shield to ensure visibility.
Caution
*ARAI RAPIDE-NEO fits only when VAS-V MV shield is installed.It cannot be attached to standard shields.*Image may contain other colors and type.
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
RX-7X ARAI
ASTRAL-X ARAI
ASTRO-GX ARAI
RAPIDE-NEO ARAI
XD ARAI
Show more
