Reviews
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
Used for TS200R OEMcarburetor
As the title suggests, it was used for the TS200R OEMcarburetor.
As I mentioned in the washer section, I think many people lose the O-ring and washer here.:I think it would be much safer to replace it with a Set.
This is a part that can be recommended for Large change.
View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
Used for TS200R OEMcarburetor
OEMcarburetor for TS200R, as title suggests. (TM30SS) Used for
I suspect that many people blow out the washer and O-ring here when cleaning the carburetor.
In fact, our TS, which we obtained used, didn't have any either.
After installation, the engine starts with a single kick, and the idling is also firmly in place.
I am really happy with the replacement.
View detail
Used for TS200R OEMcarburetor
Used for TS200R OEMcarburetor.
Washer is the root of the Main jet.
It feels textured after many years of use, but it is new and pleasant to use this one.
I don't know if it affects performance, but I feel good about it.
View detail
For TS200R Restore.
I used it on a recently acquired TS200R TM30SScarburetor.
OEM parts would be terribly expensive, but with these MIKUNIOEM parts, I was able to get them for less than 1/10th of the price.
The OEM that came with it had been soaked in Gasoline for so many years that it had turned a BeefCurry color, beyond candy-like. The product we purchased is white like a fluorescent bulb or LED and is full of cleanliness.
As for the details of the important parts, I think they are completely interchangeable, with exactly the same shape.
I am very happy with the replacement.
View detail
Used for TS200R OEMcarburetor
As the title suggests, it was used for the TS200R OEMcarburetor.
Actually, it is SEA BASSOEM Parts and it is discontinued.
They are not exactly the same, but they are completely compatible.
I believe a new replacement will restore performance.
View detail
Reliable ManufacturerOEM Product Quality
Used on SX125R under Restore.
Older motorcycles can often be restored by replacing the inner parts of the carburetor with new ones.
Since they are OEM parts of CarburetorManufacturer, they are very safe to use.
View detail
Used as Inner Parts for OEMcarburetor
Used in Restore on SX125R.
It is an OEMcarburetor, but it is VM24SS.
By replacing the carburetor inner parts with new ones, we believe that the idling will be solid, and the car will be able to be used for long distance travel with peace of mind.
MIKUNI's Pilot Jet has the same shape and comes in several sizes.
Caution.
View detail
tmrmjnLong Idle Screw
tmrmjn adjusts Idling periodically, so it's very good to be able to adjust Idol while straddling and waiting for a traffic light or something.
I also needed Spring, which is sold separately, so Quantity:I wanted it to be a Set.
View detail
Used for Mikuni TM28
Used for Mikuni TM28 CapLetter for 2st. Jet for 2nd is getting fewer and fewer these days, so it is very valuable. I hope that there will be more setting parts for the 2nd jet in the future. View detail
It must be a P-0 Needle Jet, but …
It is true that Needle Jet's P-0." but there is no hole for the air breeder.
I bought it to install on my TM32SSCarburetor for RGV250γ (VJ22A), but it cannot be used as setting parts unless the holes for air breeder are drilled.
I think it would work for Mikuni TMCarburetor which uses without Air BreederType.
I should have asked and checked before purchasing. (My mistake)
I am extremely grateful that I can still get a new Jet made by Mikuni. Hopefully there is also an Airab Lead Type for the RGV250γ, which would be very helpful.
Star Quantity with the hope that the Airab Lead Type will also be available.:5pcs.
View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
Products are difficult to understand
Parts ListParts List only contains photos, and Quantity:I thought it was 1 Set of 2pcs. but I wanted 4 so I bought quantity 2.:It was not 1 Set of 2pcs. I would have liked to have included a photo of the product. View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
OEM・for Repair
It is not a carburetor custom parts, so there is no particular change.
If I had to guess, I would say it feels good because it's brand new. LOL!
The reason why I replaced it… is because I bought a cheap inferior main jet and when I tried to install it, the Screw Pitch did not match…
So, in order to attach that Jet, Holder is used again with Tap, and
The setting work has been done successfully, but the screw threads are a little shallow and there is a risk of licking the screw threads in the future, so I ordered this replacement.
I ended up replacing it with a brand new Jet Holder here;
In the meantime, we could use the processed Jet Holder, so we kept that as a spare for emergencies.
This wouldn't have happened if I had bought a trustworthy Jet from the start, but...
Well, I'll just say I learned something.
After the Holder replacement, the feeling at the time of Jet replacement is back to normal and quite normal. It's normal.
View detail
For rebuilding immovable vehicles
I used it on an SX125R that I bought as a parts pickup. The so-called Mikuni Maru Large Main jet It is
After cleaning the carburetor and confirming that it can be started, each jet is replaced with a new one.
It is good to clean it with Chemical, but since you have opened the package, we recommend that you replace it with a brand new Jet. It will give you a totally different sense of security.
Naturally, the OEM's number is chosen.
View detail
At the time of immobilized vehicle reclamation
It was used to recondition an SX125R that was purchased as parts.
Used as Pilot Jet for OEMcarburetor VM22.
When the engine starts, the carburetor is cleaned for the time being, but if the engine starts, each jet is replaced. The Pilot Jet is particularly effective.
This Large size Pilot Jet is not available in stores, so I always buy it from Webike.
The one sold in the store is not usable because the tip is one size too large.
View detail
Fits: Others For TMR Carburetor Small body (Φ28-Φ35), Others For TDMR Carburetor Small body (Φ28-Φ35)
Setting… I'll have to replace it. (^^^^;)
Used in Setting.
TMR has few types of needles, and changing the needles changes the fee ring considerably (too much?). However, it is hard to know how it changes without changing the needles, so I tried it out.
I can't speak for NeedleSingle Body, but I'm just glad I was able to experience the difference. I own 8 Needle Bodies, including other Needles.
It helps that the price is low (I was happy with Singlecarburetor myself). (^^^^;) (e.g. "I'll be back")
View detail
TM26 Spring
I bought it because I felt the previous one was worn out.
Throttle return is also improved.
View detail
Go to Power FilterSpec. for peace of mind.
Purchased to change from FunnelSpec. to Power FilterSpec.
The intake sound and appearance of the Funnel is good for Parenthesis, but I am still concerned about dust and dirt being sucked in, and although I know it is rare, I changed to the Power Filter because of the risk of a fire caused by fuel blowback.
It is a Mikuni OEM Product, beautifully finished, and of course, can be installed smoothly without any problems.
I think it is expensive at 2500 yen for 1pc. and over 10,000 yen for 4 pieces, but I am convinced because of the beautiful construction.
View detail
It's not easy for people to change.
I tried replacing the Pilot air jet because the Pilot Jet and Pilot screw were no longer adjustable. I'm a bit big surprise to find that it only takes one change of number to feel the difference. View detail
To set up for carburetor tinkering (Part 1)
My OEMMikuniBS32Carburetor has been running for over 30 years (with a total of 5 overhauls by PRO mechanics as I can remember).
I have been saving used carburetors for parts to continue to use, but after the recent discontinuation of the OEM product, I checked the Parts List again and found that the Starter Plunger is not available as a single item for either the 1100 or 750, and the information on is also not available. However, I found that the Starter Plunger is not available as a single item for either the 1100 or the 750, and that it is not listed on ・・・・Net information. No Single Item setting. And
I know of a shop that can replace the rubber seal, but what if the body is ruined...
So, we bought this product, even though we were not sure if it would fit the bill or not.
I can't believe that such an elaborate small part can be bought for 660 yen!" I think it is an amazing product.
View detail
From Funnel to Air filter
Changed from FunnelSpec. to Air filterSpec.
A Round Type air filter from another manufacturer was installed on a Mikuni Adapter.
The Funnel is a good parenthesis with Race ish appearance, but I was concerned about dust etc. intrusion, so I changed to the Air filterSpec.
Installation is also easy:simply remove the Funnel and screw in the Adapter.
View detail