Reviews
I just want the Rubber alone.
Rubber deteriorated and was lost while driving.
It would be helpful if you could sell only in Rubber.
It will deteriorate within a year.
View detail
Get them while you can
These are factory Suzuki units for the RK. These will bolt onto any oil cooled GSXR 750-1100. The only difference between these and the ones off a 90-92 GSXR 750 (USA model) is the inlet where the carb meets the intake is +2mm bigger (not the bore that accepts the carbs - this is the same and will fit 38-40mm CV carbs or RS series), which makes them the most desireable ones to have. Again, if you are building an oil cooled GSXR buy these units now. They are NOS factory suzuki intakes and will bolt up and match the ports of any oil cooled GSXR. All suzuki intakes have been discontinued for years and are ney impossible to locate used. View detail
Good
I love the product and how the valve cover now matches with the carburetors. Installation was easy and there were no problems with it View detail
I managed to get it on.
I was doing some maintenance at the beginning of the season and found Takegawa's air filter rusted.
I thought maybe I washed the car too much. I thought I might have washed the car too much, so I asked for just the filter part, but there was no part number.
My Grom is a JC75, and I need to spend another 1 man yen for the filter. Just thinking about the future... painful expense.
I looked for a lot of things, but I couldn't tell from the pictures if it would work or not.
This filter has a slightly bent duct, and the diameter should be the same on both the JC92 and the JC75.
I bought it The result was not attached.
However, since I bought it, I thought a lot about it and replaced the duct part of the filter that was already attached with this filter.
The diameter is a little different, but fortunately the filter I'm replacing is narrow enough to fit.
trial and error Yeah, I got it.
I'll have to see what else I can come up with until it's time to replace it again.
I think Takegawa should have released repair parts since it is a filter.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB
Definite power up!
I had been riding on an OEM diverted PB16carburetor with a KITACOLight bore up kit to 75cc + KITACOHigh camshaft, but I replaced it with a KITACOPC20 for one more power feeling.
The replacement work is done while reading the manual that comes with the product.
The content is good, but the paper and font size are too small for my aging eyes (laugh).
I managed to read and install it successfully.
Recomendation that the Fuel Cock needs to be relocated and that the ON and Reserve positions should be Memo'd. Otherwise, after it is assembled like mine. Oh, no, I've got it backwards. I've got the hose connected. This is a great way to avoid the need to
Setting is the default setting (at MJ #85 SJ #35) I kicked the KICK anyway as it was, and the Engine was on in one shot.
I went out for a test drive as it was, but the normal air cleaner box did not seem to have enough air inflow.
This was addressed by making the Connecting Pipe for CUB90 and drilling a hole in the box to increase air inflow.
Then, it became a wonderful Engine that produces power well from low rpm and turns all the way to the top.
The quality of the intake manifold, Bracket, Gasket, etc. is good and we are very satisfied with the quality and performance.
It would be great if you could release the carburetor SettingData, hopefully only for your own product combinations.
View detail
Used on XJR1300.
I used this part for the OEM return of the OEM Carburetor on my XJR1300 RP01J. This part was cheaper than ordering from YamahaOEM Parts. View detail
Fits: YAMAHA CELLOW 250, YAMAHA Tricker 250, YAMAHA CELLOW 250, YAMAHA Tricker 250
Refresh OEM Product Replacement.
I bought this one because the OEM is discontinued, and it is an OEM Equivalent Product, which is fine, but the O-ring is not included.
The cylinder head was replaced while removing the cylinder head.
The OEM Product we removed had cracks but no secondary air contamination, so the functionality remains the same, but the new Rubber feels good. Durability remains to be seen.
Cautions for installation
The bolt attached to the engine was sticking, so I had to spray it with penetrating lubricant and leave it for a while before I could remove it.
View detail
Cracks soon.
As an indicator for a pwk28 dedicated to a 2-stroke engine, it may lack strength and rigidity against vibration. Power Filter, which is heavier, cannot be installed, and only lightweight Funnel can be installed. View detail
In the Chinese VM Setting
[How is it used?
For some reason, Throw of Chinese VMcarburetor has this Type, so I used this one for setting.
Was the one you received as per Image?
The Sponge dividers were quite nice compared to the usual divider-only Packages.
It is good because Jet does not mess up inside.
Was the installation difficult?
Accuracy is adequate. There were no problems.
How was your experience with it?
Smallest SizeQuantity for SmallEngine Displacement Volume:I thought that with Set, I could Cover all of the Setting range.
It is said that OEMs are more accurate and better for jets, but if the mother company is a Chinese carburetor, I don't think it will be a problem.
[Was there anything that disappointed you?
None in particular
View detail
Fits: HONDA DREAM50 (DREAM), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA MAGNA 50 (MAGNA), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS)
Air filter
The air filter requires regular replacement. So I bought it again for my Honda Super Cub. Change regularly and your motorcycle will always go fast.
The air filter requires regular replacement. Therefore, I bought it again for my Honda Super Cub. Change regularly and your bike will always drive fast. -------------------------------------------------- -------- The air filter requires regular replacement. Therefore, he purchased it again for his Honda Super Cub. Change regularly and your motorcycle will always ride quickly. The Air Filter Requires Regular Replacement. TheFore, I BOUGHT IT AGAIN FOR My Honda Super Cub. Change Regularly and Your Bike Will Always Drive Fast. Powered by Google Translator
View detail
Fits: HONDA SUPER CUB 50, HONDA LITTLE CUB
two-edged sword
On an uphill which is also tough for a 4-wheeler, LITTLE CUB, registered as a Class 2 moped, was able to climb the hill at 40 km/h in 2nd gear. 5 km/h faster after replacing the Air cleaner. Considering only the maximum speed, the effect is clear. (I'm running 120mm wide, bulky Rear tires, so that's the only reason I can't get the Speed up.)
However, on the flat, I lost all Punch up to the mid RPM range of 1st gear 20km/h, 2nd gear 35km/h, 3rd gear 50km/h, and on an uphill, it stalls at once from 3rd gear 60km/h. It seems like there is too much air in the low to mid RPM range and the fuel injection is not keeping up? The intake sound is so loud that it even drowns out the exhaust sound of the BEAMSExhaust system.
Nevertheless, when the engine reaches the high RPM range of 35 km/h in 2nd gear on flat terrain, the Punch becomes effective and can be used up to around 45 km/h, which is above the rev limit. In this speed range, the intake sound becomes smoother and the exhaust sound becomes louder.
3rd gear missMatch GEAR ratio and EngineTorque at all speeds. (Adverse effects of RSprocket exchange) On a gentle uphill, the engine stalls even at 40 km/h in the middle RPM range, where Torque is supposed to be, and finally exceeds the Rev limit of 60 km/h on a long flat or downhill slope. At this time, there is no engine punch, but the engine noise peculiar to high rpm is heard, which is not good for both mental health and the engine.
In case of rain, a MINIBucket bought at a 100-yen store is covered to prevent raindrops from entering the intake air. (Lol)
View detail
Fits: HARLEY-DAVIDSON Vehicles with OEM CVCarburetor
Minimum Quantity to Overhaul carburetor:Set
I used this for an under-seat engine hole on a 2000 XL883XL1200C SPORTSTER 1200. The vehicle had been immobile for a long time and the Carburetor rubber parts were hardened and leaking fuel. The beauty of this kit is that it omits the Float, DiaphragmRubber, and other parts, and only requires a minimum quantity of parts.:The Carburetor functions have been restored and I am generally satisfied, but the rubber packing of the Float chamber does not fit perfectly and I am not able to assemble it. View detail
Fits: その他 (For TMR carburetor)
Mounted on TMR38D2
Installed according to YOSHIMURA's instructions and good. View detail
To disassemble the TMR38D2
O-ring, P/K only, so used for disassembly and cleaning.
I wanted Spigot's O-ring to be included.
View detail
I knew it!
Changed carburetor and bought again as Size changed.
Design is cool.
View detail
Fits: BMW S 1000 XR, BMW S 1000 RR, BMW S 1000 R, BMW R nine T all models, BMW R 1200 ST, BMW R 1200 S, BMW R 1200 RT, BMW R 1200 RS, BMW R 1200 R, BMW R 1200 GS Adventure, BMW R 1200 GS, BMW HP4, BMW HP2 Megamoto, BMW HP2 Sport, BMW HP2 Enduro
Cost-effectiveness was excellent.
I was using it on a W800, and it was a little expensive, but I installed it because the W800 is air-cooled and there is a lot of room around the engine.
Used with normal muffler and air cleaner, the response to the opening and closing of the Axel has improved to the point of being laughable. Knocking at low rpm was also eliminated and fuel consumption was improved.
However, the engine became too white, and the balance between the chassis and suspension was not right, so I wondered whether I should proceed with Custom or not, and eventually gave up the W800.
View detail
Fits: HONDA DREAM50 (DREAM), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA MAGNA 50 (MAGNA), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS)
I feel like we're getting more and more OEM90-ized (laughs).
I had Powerful on, but the intake sound was LARGE, and I was worried about driving in the rain.
The goal is to make maintenance easier, improve year-round performance, and increase intake efficiency.
What is Motorcycle's Air cleaner?
It catches dust and dirt in the air that is sucked into the engine and delivers clean air that is free of fine garbage to the engine.
(?name? (air cleaner) Airborne dust (Jin'ai) A device that removes In other words, an air purifier.
The need for air cleaners.
… The most important role of Air cleaner is to remove Garbage from the air that the Engine sucks in, so that the Engine will not be damaged. 。 There are various kinds of Garbage in the air, and when your motorcycle runs, it also raises Garbage on the road surface! 。 If such Garbage gets into the Engine, it will damage the internals.
Type of Air cleaner
■ Dry." … Dry type air cleaner is one in which the Element is dry (Type not soaked in Oil, etc.) and is more likely to pass fine Garbage than wet type, but is less expensive! 。 Garbage on the surface can be blown off with an air gun, but the dry type cannot be washed when it becomes dirty, so replacement is fundamental.
*CUB is this Type.
Wet." Wet type is a type of Urethane sponge soaked with oil, and has a characteristic of adsorbing Dust more easily than dry type. 。 Many wet elements can be cleaned and reused by washing them with kerosene, drying them, and soaking them in a little special Oil or 2Cycle Oil. 。 Wet type is slightly more expensive than dry type, but it is more economical if used for a longer period of time because it can be used while cleaning.
*SR400 is this Type.
Screwcass formula." The…Screwduster type filter is a method in which oil is soaked into filter paper and dust is adsorbed onto the oil. 。 They have low ventilation resistance, filter moisture, and are either disposable or washable and reusable. Many are non-reusable and must be replaced.
[Neglecting air cleaner …]
Combustion efficiency is reduced.
Failure to replace the air cleaner will reduce the amount of air that is drawn in, resulting in a change in the air/fuel ratio (mixture of gasoline and air) and adversely affecting combustion efficiency. 。 Poor combustion efficiency can easily lead to abnormal combustion and unburned fuel, which can cause Knocking and other problems.
Fuel consumption will decrease.
The decrease in combustion efficiency will cause the engine to run out of steam, which in turn causes the Axel to open more and more, adversely affecting fuel economy. 。 The need to open the Axel more to achieve the same speed as before has a negative impact on fuel, especially when driving up hills and at high speeds. 。
The Engines are not hanging on well.
The Engine will not be able to get the amount of air it needs, so it will be harder for the Engine to hang. 。 The engine runs slower, which increases the time required for the cell to run, which in turn increases the load on the battery, which can be especially slow in winter and on days with low temperatures. 。
▲Engine suddenly stops.
Failure to replace the air cleaner may cause the engine to suddenly stop when idling or at a stoplight. 。 At low RPM and Idol conditions, compared to when running, the Engine is more likely to stop, partly because the amount of air supplied is lower to begin with.
Additional notes
Ideally, air cleaner should be cleaned or replaced after 5000 km.
good point
◎Use OEM type air cleaner→.
Air intake noise is quieter with Cleaner in the Air Cleaner Box.
The intake area is also larger than that of the ◎50 OEM, so intake efficiency is definitely improved.
◎Fuel consumption is not bad.
◎Filter in the box, so it can be run in the rain.
A bad point
The 50OEM Air Cleaner BOX will not fit the 90OEM Type Air Cleaner, so you will need to purchase a separate box for the 90. Also purchase a CONNECTOTube (a pipe that connects the carburetor and the BOX).
What is the difference between Power Filter and Air cleaner? Power Filter generally refers to the product name, but non-OEM air cleaners are sometimes referred to as Power Filter, while OEM products are sometimes distinguished as air cleaners. 。
Power Filter→ Some products claim to increase intake air efficiency, but increased intake air efficiency can prevent blowby gas from being discharged from the engine, which can interfere with the engine's combustion efficiency. 。 It is safe to replace it with an OEM air cleaner element (filter) unless the air cleaner box cannot be installed due to customization.
The OEM is also more durable and the Filter itself is less expensive than the external Powerful, making it more cost-effective.
Even a single filter can improve engine startup and fuel economy! 。
I've been playing around with it a lot, and I have to say, every time I switch back to OEM, I realize how good OEM is (laughs).
View detail
It takes a long time to deliver other than
I was looking for a FunnelFilter for my CUB with YDcarburetor, but the cost was higher than Power Filter and Filter adapter, and the overall length was longer, so I was thinking about it. I found that FunnelSocks seemed to be a good choice, so I decided to change the spec.
I am glad that the total length was short and there was no other Wobble.
Wobble may form as the Sponge grows, so it needs to be monitored.
View detail
Intake Exhaust ChamberBlankPlug
Personally, I would prefer no Intake Exhaust Chamber to Refreshing. View detail
I'm sure it can't be reused. But...
You don't reuse them or anything. It's consumable.
The product works well during the annual overhaul and is a big help in terms of Gold price.
View detail