Reviews
Excellent ventilation
I am wearing a mesh jacket, but it is old and the spinal pad is made of a urethane board. The Spinal Pad is made of a urethane board, which is not breathable, so when I stopped, it was sticky and stuck to my back. I looked for a waffle-shaped Mesh Pad that has good ventilation, which is now the mainstream, and found this product that seemed to fit in terms of size.
My impression when driving is that it is significantly cooler when running because of the wind draft. The shoulders inevitably come in contact with the back, so there is some stickiness, but the entire back is now cooler and less stuffy when the vehicle is stationary. Safety is not so good since it is made of urethane and mesh, but I think it is better than nothing.
Considering the comfort when running, I think the cost performance is excellent. If you are looking for safety, I think you should buy an expensive Mesh jacket or Spinal Protector. If the size fits, I would recommend replacing it.
View detail
Full face, it's a little hard to turn my neck...
Motorcycle：MT-09
Helmet：SHOEI Z-7
Was the one you received as per Image?
The Large size is just like the Image. It is a large size like the thin neck pillows that you can find at a hundred-yen store. The weight is not bothersome even when wearing it or holding it in your hand.
[How did you feel about the Fit?
It looks good. But I am not using it for Off driving......................................
Even when touring long distances on the road, it is unlikely to be heavy, cramped, or tiring.
The Belt is attached to the neck or shoulder and removed, but if you are not used to it, you may have a hard time at first.
How was your experience with it?
I ride MT-09 and I have no problem with the position of this model.
As expected, it was difficult to move my neck up and down.
However, it is not to the extent that it does not move at all, so it is not to the extent that it is difficult to see diagonally behind you at intersections or when changing lanes.
However, the feeling may be slightly different for SS with a tight forward tilt or Large Cruiser with a backward tilt.
[Was there anything that disappointed you?
The large diameter for the neck is in line with the product's aim, but it would be better if the large diameter could be adjusted with a snap button in front of the neck to fit the helmet.
What are the specs of the product, such as protector?
I think it will serve the purpose of reducing the impact on the neck when the helmet is worn and the head hits somewhere.
How did it compare to other products?
Neck brace is basically for off duty, so I don't have anything to compare it with...............................
Other items that would be helpful
What made me buy it:I bought it to soften the impact on my neck when I hit my head somewhere while wearing Helmet. I have not had any bumps or accidents, but I wear it as a precaution.
Included Parts:No
Note:It is washable. The surface is a synthetic fiber cover and belt, which can be hand washed in a basin of warm water.
The inside is made of urethane, like the letter C in the Alpha bet. This can be washed by hand as well.
Opinions and requests to Manufacturer:I think it would be good to Appeal to everyone to wear more. It's cheap.
View detail
Relief
I had to repurchase because of damage caused by a fall.
Protector melted to mush but legs are safe!
It is highly protective, yet easy to wear and does not get in the way.
View detail
To replace discontinued products
My favorite e-belts were discontinued, so I bought this one. I feel that it is a little less durable than e-belts, but the hold feeling and comfort are good. Considering that the price is 3 times higher than e-belts, I think this is a good product. View detail
I'll be doing this for a while.
I use it for off-road fun ride, and although I can't afford a product as expensive as a knee brace, I don't have much choice when I narrow it down to a type with an anti-twist Hinge. The overall shape of this product is rounded and small, so I was able to wear off-pants easily. There are 3 Rubber belts for handling, and it is very easy to use around the installation and the application cloth to avoid pain. It is good. View detail
![NUCLEON KR-CELLi [New ClioN KR-CELLi]](https://img.webike-cdn.net/catalogue/images/52889/6503919-002-fr_nucleon-kr-celli-protector_TS.jpg)
Maybe the definitive summer back protector for public roads.
The M size jacket by Rough & Road fits perfectly, while the L size jacket by KUSHITANI has room for a large pocket.
It is much more comfortable than the common "hard protector". It is a level that makes you feel like you are missing out on something if you don't wear this with your mesh jacket.
I'm curious to see what the siblings of CE2 are like.
The price is, well, high. But Large is a good product and I strongly recommend it.
View detail
This is good enough, no worries about gapping!
It is fixed in three places:the upper arm and two places in front of the elbow.
In addition to the Velcro, the elbow front portion has an inner-like portion, which holds the elbow relatively firmly in place.
On the other hand, it may not be to everyone's liking, as it is sweat-soaked and the feeling of pressure can be bothersome.
There is also a possibility of interference when used with Protector with Shoulder Pad.
No problem at all to attach to OffJersey's Inner.
View detail
It was not bad to use, but CUB leaked due to sweat!
I wore it for a day on a hot, sweaty day and the part where the Protector was adhering to it was CUB-red and CUB-red….
The mesh fabric part is fine, but the ProtectorPocket part is made of stretch fabric that adheres closely to the Protector, and the Protector itself has no ventilation holes, so it gets stuffy.
This would not work in the summer or in sweaty situations.
I'd rather wear a mesh jacket that doesn't stick to my Protector.
View detail
cost-effective
[How is it used?
I purchased the soft protector because I thought the original soft protector would not be safe enough for use on touring, winding, and highways.
Was the one you received as per Image?
The thickness, weight, softness, etc. were generally as per Image.
How was your experience with it?
I think it is one of the thinnest and lightest of the Hard protectors. After installation, I felt that the Jacket became heavier when I put it on, but once it was on, it was not so heavy that it bothered me. Combined with its original slightly rounded shape and its easy bendability, there was little discomfort in the riding posture.
Also, some reviewers said that Hard protector is hard to put into Jacket because it does not bend, but I was able to put it into Jacket easily.
[Points to note]
It is not CE Standard compliant, so be careful if that is your concern.
Compared to other companies' Spinal Protector, the part that hits the shoulder blades is made wider, so I think it needs to be tested to see if it will fit in other companies' Jackets.
How did it compare to other products?
I have never purchased a hard protector from another company, so I can't compare, but it is by far more secure than the soft protector. (Although judging from the picture, it seems that they are considering breathability in Hard protector.)
【Review】
It can be a recommendation for those who are not particular about CE Standard but are not comfortable with Soft protector. The price is low, but I don't think it matters much what CE Standard is at the point of hard, so if you choose this product for cosmetic reasons, this is the one for you.
View detail
I feel safe when I wear it.
I bought it because I want to ride in rough clothes but with safety.
It is cooler than the Mesh jacket when running.
In traffic, your back will be sweaty and you'll feel hotter than if you weren't wearing it.
This is all a TradeOff with safety, so there is no choice.
It is good to have one because it is not like armor like Hard protector.
I usually wear a hyod JacketL Size, but I decided to go with a M Size because I thought it would be meaningless if I didn't wear it Exactly and the fabric would stretch with the weight of the Protector.
The result was correct. The fabric stretches quite a bit, so I think it is Large sturdy even if it is 1Size smaller than Jacket.
I will get through this summer with quick-drying underwear + this + a long T.
View detail
![[Honda x RS TAICHI] Tech Cell Chest Fitting Belt for Protector](https://img.webike-cdn.net/catalogue/images/42129/0SYTP-X9A_01FS_K_TS.jpg)
As a summer Protector
In the fall and winter, I can put Chest Protector in my Jacket, which is good, but there is no summer version, and the chest has been body worn until now. I was getting scared of the possibility of something happening to me, so I had a Point and bought it. I considered many Protectors, but decided on this one because of the price and ease of installation. I like it because I can easily put it on and take it off when I get off the bike, but since I wear light clothing, it looks a bit bulky. It is acceptable because I only wear it when I am riding. I think the product is good. I would recommend it to my friends. View detail
![LAUNCH D3O [Lunch D3O] Elbow guard](https://img.webike-cdn.net/catalogue/images/96754/26431_001_1_TS.jpg)
It is for MTB.
It is originally Protector for MTB, but I bought it believing in Material called D3O.
Elbow protectors for off-road motorcycles are usually equipped with plastic cups, which are safe, but I was concerned that they were stuffy and difficult to move around in, but this protector is D3O, so it is soft and fits well.
I fell down several times in Enduro the other day, but thanks to you, I did not have any injuries, especially to my arms.
I washed my sweaty Protector as it was, because it was D3O, and I was glad that I could do that without Cup.
I am 170cm tall with a normal build and the M size was EXACTLY what I was looking for.
View detail
Taking advantage of easy-processability
It is only because it is different from the original application. "You're on your own. And...
Purchased to upgrade the UrethaneProtector without CE marking that is built into the Riding Pants.
I cut out the shape I wanted with Scissors, and then Bolt On with the uneven side on the outside and upgrade was done as if nothing had happened.
Although it is better not to know about the defensive performance, the quality of the impact is clearly different from that of a light tap, so the effect should probably be expected.
If you want a uniform thickness, Chest Pad may be a better choice, although the unit price per area will increase.
View detail
For elf's Jacket
I purchased elf's JacketEL-9221, but Standard Equipment's Protector is only for the back.
I have one for the chest and wanted to add Protector for elbows and shoulders, so I bought this product because it was recommended.
It is Exactly in the area where the Protector of Jacket is put in, and I think the fact that it is Hard gives a sense of security.
There are better Protector products from other Manufacturers that compare better in terms of Gold value and safety, but we chose the recommended product as a safe choice.
View detail
Relief
I wear a helmet and spinal pad, but I was looking for a Chest Protector, which is a hot topic these days. I was looking for a Chest Protector.
I was not sure about the Best type, but I am glad I went with this one.
I can ride Motorcycle with peace of mind mentally and footpeg gari gari!
View detail
Safety!
I bought this Jacket to wear with no Protector at all.
It is not a hard Protector, so it is comfortable and does not hurt your elbows.
Perhaps it is a problem with my body shape, but the shoulder Protector is not aligned, but if I align it when I put on the Jacket, it does not shift.
However, it is a tight-fitting item, so when you take it off at a rest stop and wear a cotton T-shirt underneath, you will be covered in wrinkles (laughs).
View detail
Good for everyday
I bought this for protection to quickly put on my everyday clothes. I only ride behind my husband's motorcycle, so I think this will be enough for commuting and riding around town. When I go touring, I will of course wear a specialized MotorcycleGEAR.
It's easy to put on and take off, but it inevitably comes down gradually and floats around the knees.
View detail
It's neither good nor bad
CE is a standard for soft pads, and I have heard that it is equivalent to CELevel 1 or higher at the time of HardPad.
However, JMCA is no longer available unless you have passed CE Standard.
It is light, thin and inexpensive.
That's all.
View detail
For everyday Pants
I have been interested in Protector for a while.
The feel is good, the size S is just right and does not gap when walking.
View detail
^o^Good Fit feeling.
Easy to put on and good cosmetics! View detail