Reviews
It is just the right length for CB1100!
[How is it used?
I wanted to change to a Classic design Grip to match the old car style Custom, so I replaced it.
I was worried about Raw Rubber, but Black Type seemed to last longer and was cheaper, so I decided to go with Black hoping for durability rather than fit.
Was the one you received as per Image?
It looks shiny in the image, but the actual one is not so much.
Was the installation difficult?
It was a little strange to remove the sticking bar end and grips, but if you remove them patiently, it was not so difficult to install them.
If the Grip is NORMAL or has not been replaced for a long period of time, CRC556 or similar is essential.
The finished product is almost the same length as the OEM Product, so it is just the right length and fits without discomfort.
How was your experience with it?
The Rubber is soft and easy to operate as I like its hardness.
[Included Parts:were they on?
Pack Cage ONLY and no other Included Parts:.
[Was there anything that disappointed you?
There was a small amount of BALI during manufacturing, but I didn't mind that much.
During installation, the EFFEX Bar End stuck and did not come off easily, leaving the Rubber and Bolt in the Handlebar Pipe.
We managed to rescue it using Wire and magnets, but the work took a LARGE width of time.
View detail
Well matched to the styling of the Monkey 125
About quality and texture, I can confirm that the quality is great and that the material used is a durable rubber with a soft texture. About the feeling of use, I find the Yoshimura rubber grip set much more comfortable then the original grips and they still look well matched to the styling of the Monkey 125 with their grip design. Products to buy together, A new throttle tube, specifically a quick throttle tube from Kitaco would be ideal to add to your cart. Difficulty of installation, I can say the fitment of the rubber grip set for my installation was average due to the difficultly removing the original grips in one piece as I wanted to retain them for re-installation in the future. Cost performance and comparison with other products, Pricing of this product is good. You receive a nicely designed rubber grip set that are comfortable but there are much cheaper grip sets available from other brands if the price is too high for you. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Extremely well packaged and the Webike staff always got back to me with any concerns I had over the entire process. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
RossiGrip
From the original OEMGrip to a new, identical OEM.
I bought a new pair of white gloves only for the left side because the left side was very dirty.
It seems to be Spec. as it gets dirty the same way even though it is new.
It is becoming more and more likely that Gloves has a problem.
View detail
Fits: YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA YZF-R1, KAWASAKI ZX-10R, YAMAHA YZF-R1, MV AGUSTA F3 675, BMW S1000XR, BMW S1000XR, BMW S1000RR, BMW S1000RR, BMW S1000RR, BMW S1000RR, BMW S1000R, BMW HP4, BMW S1000R
Easier to grasp.
I was concerned about the OEMGrip sagging, so I replaced it.
The conclusion is that we are very happy with the replacement.
It is very useful because it is very easy to grip and feels a little bit like it is being sucked into your hand.
When accelerating, I now only have to lightly grip the grips, which makes it much easier.
YZF-R1 (2016) to ExactSize and was easy to install.
Color is Color:Since it is Gray, I was concerned about transferring Gloves stains, etc., so it would be nice if a Black color was available.
View detail
Replaced it with a Posh handlebar on my w650.
No vibration is transmitted! It is a great product, very comfortable.
View detail
Thin and snug
I don't know if it's the OEMGrip that's hard or the Position or the vibration, but I'm starting to get pain at the base of my thumb on long distances and I have an extra Point, so I replaced it.
I was thinking about Domino's Turismo, but I still like the slimmer look! But I want earthquake-proof!
So I decided to go this way.
Yes, it fits.
I thought the Size was about the same as the HardGel711 that I am buying Repeat.
It's a quake-resistant Gel, so it feels soft to hold. I am looking forward to seeing how much the pain will be reduced.
I know it says to use Epoxy adhesive for installation, but the grips are too soft and I had a hard time putting them in solidly with Active's Throttle cone.
The Clutch Side was wired without any glue because it was stuck on the Throttle side.
View detail
shock
I learned that what I had been using was just Rubber.
After using this, I have no confidence in using any other Grip.
Fit as if absorbed into the palm of the hand, with sufficient cushioning to prevent fatigue.
A non-habitual design that can be attached to bobber, chopper, caferacer, etc. regardless of genre.
Recommended
View detail
Fits: SUZUKI DF125, HONDA APE100, HONDA APE100 TypeD, HONDA APE50, HONDA APE50 DX, HONDA APE50 TypeD, HONDA BENLY CD125 T, HONDA BENLY CD90 , HONDA BENLY110, HONDA BENLY50S , HONDA BENLY50, HONDA BITE, HONDA BROAD, HONDA BROAD 90, HONDA CABINA, HONDA CABINA90, HONDA CB125 T, HONDA CBR125R, HONDA CBX125 F, HONDA CBX125 Custom
great greap
I liked these grips, they look like factory ones, they were delivered in 2 weeks, I’m very happy with the purchase, I will recommend them to friends ------------------------------ ---------------------------- I liked the vulture data, they looked like factory ones, delivered in 2 weeks, I am very pleased with the purchase, I will advise my friends Powered by Google Translator View detail
Grip reinforcement is satisfactory
There are no problems with quality, texture, etc.
Design would like to see more Variation.
Well, it's ShrinkTube, so I guess it can't be helped.
View detail
Not only looks good, but is easy to use
This Grip looks good on old cars.
I installed it on my CB750Four2 and had trouble with heavy Axel operation, but the thicker grip and non-slip feel improved the operation.
View detail
Fits: SUZUKI DF125, HONDA APE100, HONDA APE100 TypeD, HONDA APE50, HONDA APE50 DX, HONDA APE50 TypeD, HONDA BENLY CD125 T, HONDA BENLY CD90 , HONDA BENLY110, HONDA BENLY50S , HONDA BENLY50, HONDA BITE, HONDA BROAD, HONDA BROAD 90, HONDA CABINA, HONDA CABINA90, HONDA CB125 T, HONDA CBR125R, HONDA CBX125 F, HONDA CBX125 Custom
Mini greap hunter
very good grips, similar to the factory ones, very soft, comfortable to hold, I really liked it, I will recommend it to my friends View detail
It is comfortable to hold and absorbs vibration well.
[How is it used?
I bought this product to refresh a used WR250R that was equipped with an external grip for road motorcycles.
Was the one you received as per Image?
Even with muddy Gloves, I can continue to play in the mountains without slipping on the Grip. "Mountain play=tipping over." It is a good product as per Image with a Grip that I can rely on.
Was the installation difficult?
The GripMaterial itself is soft, so it is not difficult to insert it into the handlebar afterwards. "P" Set the design of the "B" to be where you want it to be, and then dry the bond.
How was your experience with it?
The material itself is soft and reduces vibration from the handlebar quite well.
The grip is neither too thin nor too thick for me, and it grips well even when the gloves are wet with mud, which ultimately helps to reduce fatigue.
[Included Parts:were they on?
Quantity:Pair (for Left and Right) I think that all manufacturers of Grip products are like that.
[Was there anything that disappointed you?
Color with light-colored inside:Gray and easy to see dirt, so let's beautify it regularly.
Vibration absorption is quite promising due to the soft material, but durability may be somewhat unavoidable.
0Other items that may be useful include
Point and hang of installation
In winter, it may be easier to work with Dryeretc. to warm it up a little.
After installation, I tighten both ends and the middle with Tie Band and leave it in place for about a day (using RubberBond).
[Availability and clarity of the Instruction Manual
(For first time users) The thickness of the Motorcycle Grip is obviously different between the Axel Side and the Clutch Side (the Axel Holder is made thinner), so please do not be in a hurry. If you remember the above without Instruction Manual, I think you will not make a mistake in installation.
[Notes]
Not particularly
Well, there are two types of people in my group, those who apply Bond and those who don't, but I am the one who applies Bond because I don't want the grip to turn while driving.
If Bond is applied, allow about a day for the Pond to dry.
[ITEMS TO BUY TOGETHER
If you are a Bond painter, you should buy a strong RubberBond.
You can buy them at motorcycle supply stores, Webike, or even at your local home center.
[Opinions and requests to Manufacturer
The Large variation is helpful because it lineups a wide variety of grips.
Thank you for your continued support
View detail
Genuine Domino Grips for Suzuki GSX-R1000
The owner of this bike wanted a change from the Renthal dual compound grips they usually buy for this bike. Specifically, they wanted something other than grey to help blend the grips to the bike. They had decided to go for the blue and white lettering version. I have been told that these grips are super sticky so you should not lose function no matter what the weather conditions. The shipping was fast and via EMS, delivered to me in 5 days. All was packed really well and did not move during transit, no damage at all. When these arrived, they were in their own packet and no damage was done during transit. They are a really nice and sticky set of grips and as they should, have one for the throttle side wich is slightly larger in diameter to fit the throttle tube. With a little brake and clutch cleaner sprayed inside and then onto the actual bars and throttle tube, they slid on pretty easily. All I can say is, try them and you will find out just how sticky they actually are. Veyr good purchase and will get these again in the future. View detail
Purchased as a vibration countermeasure for MAJESTYs
I learned that MAJESTYs vibration was not reduced by replacing the handlebar, so I thought I would try changing the Grip for the time being. As a result, the numbness in my hands disappeared and I am satisfied with the Large change. View detail
Good price and appearance.
[How is it used?
Mainly Touring
Was the one you received as per Image?
It was just as Image.
How was your experience with it?
I guess it's a preference, but after about 30 minutes the unique unevenness starts to bite into my hands and become uncomfortable.
Good design, but not comfortable to hold.
How did it compare to other products?
After some use, I will change to Pro grip.
If you care about looks, it's Recommendation, but not much functionality.
View detail
Stiff but thin
It's hard and a little painful with bare hands. (I don't mind at all when I'm doing Gloves). The "M" is a very small, but it is a very large, so it is likely to be a matter of taste.
There is some talk of beans forming easily, but so far there seems to be no particular problem for touring about 100 km.
I have small hands, so I changed it and it is easier to operate Lever.
If you don't like to glove in a little bit, I don't recommend it. The bumps may be a little painful.
View detail
I'm sure you'll have different tastes.
I originally had a BaseGrip, but switched to this one because I thought it would be easier on long distances. I thought it would be easier on long distances, so I switched to this one. The outer rubber is divided into two parts, and I thought it was well thought out and easy to attach and detach.
However, the feel of the grip is soft and good, but my hands are smallish, so I ended up removing the outside and using BaseGrip only.
Affordable and easy to remove and install, it is recommended for those in the trial-and-error stage of their preferred Size.
View detail
Good for long distance driving but sticky….
It is nice that it is soft and does not tire me out after long hours of driving.
However, after about six months, CompoundTube starts to stick to my hands in a sticky and unpleasant way.
I think it is useful for touring for a long time, so I think it is possible to use it while changing CompoundTube.
View detail
Grip is highly functional!
[How is it used?
We replaced them together when we replaced the high throttle.
Was the one you received as per Image?
The Yoshimura logo on the Grip Rubber is a good parenthesis.
Was the installation difficult?
We removed and inserted the NORMAL Grip while making full use of CRC and other tools. If nothing is used, considerable force is required.
How was your experience with it?
The use of thick-walled rubber allows for less numbness and peace of mind even over long distances.
[Included Parts:were they on?
No other particular accessories are included.
[Was there anything that disappointed you?
Nothing in particular, but it will crack over time.
Although the Grip is more expensive than other companies' products, the cheap Grips from KITACO and KIJIMA have some functionality problems, so this product gives us a sense of security.
View detail
It is thin and difficult to raise the arms!
The thinness is good for hard to ride up on the forest road! Not soft enough for long distance touring... View detail