【PRO GRIP】Short Type for Moped Model #724 MINI Review
Purchased as a vibration countermeasure for MAJESTYs
I learned that MAJESTYs vibration was not reduced by replacing the handlebar, so I thought I would try changing the Grip for the time being. As a result, the numbness in my hands disappeared and I am satisfied with the Large change.
Responses
Other reviews
Easy to grip!
[How is it used?
Normal grip was worn out and had to be replaced.
Was the one you received as per Image?
Design, coloring and quality were all as per Image.
Was the installation difficult?
The Normal grip is glued to prevent it from falling off and is difficult to remove by brute force alone. It should be possible to remove the grip by spraying CRC556 or similar to nullify the adhesive and then patiently twisting the grip to remove it little by little.
Once removed, installation is very easy.
How was your experience with it?
The double-layer construction provides an exquisite grip. I was able to use it for long hours of Touring Riding without any problem and without numbness.
[Included Parts:were they on?
There is no other.
[Was there anything that disappointed you?
Nothing in particular, but as they are used, they tend to get Garbage and hand stains in the holes, which makes them look bad.
If you feel that the normal grip is not enough for you, we recommend this grip, especially if you are a first time user.
View detail
I will not buy anymore
The OuterRubber and Inner rubber were peeled off during the installation process when we were having difficulty installing due to the softness of the material.
It took a long time to push it in and the quick-drying Bond stuck during the process, so I gave up on installing it and discarded it without ever using it.
I measured the inside diameter at hand, and it is about 20mm Left/23mm Right.
It is so tight that I don't even need Grip bond.
I think it is designed this way based on the fact that Material is stretchy, but when I try to pull it, it stretches to the point of shredding, and when I try to push it in, it bends in a squishy way.
Is there some kind of HANG in the installation?
View detail
Vibration reduction, love the look.
Recommended for motorcycles with a lot of vibration, it is quite easy.
And I'm glad that this 115mm is just fit for my motorcycle.
(I don't want to give away the type of car because I don't think anyone knows it, 115cc)
I'm not sure if it's the same for the current one, but I'm sure it's the same for the new one.
Of course, it's not as disposable as it sounds, and it's an OEM ratio, so it's totally worth the cost.
View detail
I can't ride long distances without it
Because it's a single-cylinder motorcycle, there is a certain amount of vibration, or if it's an OEM, my hands get numb for an hour It's hard just to ride, but the PROGRIP makes it easy for me to ride for about 3 hours!
I've been using it ever since (Sort of like a late-night shopping experience report on W
However, I think Life is short because it's just soft
I thought it would be a good one to have for a year
Be sure to wear gloves when you install it as it will make your skin crawl if you do it with bare hands
View detail
The vibration was painful, so I bought it
It was installed on a HondaSUPER CUB 88cc Bore up vehicle
As the vibration becomes painful over a long distance, the vibration proof type of I wanted a Grip and looked for a good fit, but it was unknown I ordered it on a bet that it looked sturdy enough for me
Both the installation and driving test were Large success
I liked the vibration and the grip, but I'm worried about its longevity because it's soft
Well, I'm thinking of it as a consumable item
View detail