【PRO GRIP】for Off-RoadGrip #788 Review
It is comfortable to hold and absorbs vibration well.
[How is it used?
I bought this product to refresh a used WR250R that was equipped with an external grip for road motorcycles.
Was the one you received as per Image?
Even with muddy Gloves, I can continue to play in the mountains without slipping on the Grip. "Mountain play=tipping over." It is a good product as per Image with a Grip that I can rely on.
Was the installation difficult?
The GripMaterial itself is soft, so it is not difficult to insert it into the handlebar afterwards. "P" Set the design of the "B" to be where you want it to be, and then dry the bond.
How was your experience with it?
The material itself is soft and reduces vibration from the handlebar quite well.
The grip is neither too thin nor too thick for me, and it grips well even when the gloves are wet with mud, which ultimately helps to reduce fatigue.
[Included Parts:were they on?
Quantity:Pair (for Left and Right) I think that all manufacturers of Grip products are like that.
[Was there anything that disappointed you?
Color with light-colored inside:Gray and easy to see dirt, so let's beautify it regularly.
Vibration absorption is quite promising due to the soft material, but durability may be somewhat unavoidable.
0Other items that may be useful include
Point and hang of installation
In winter, it may be easier to work with Dryeretc. to warm it up a little.
After installation, I tighten both ends and the middle with Tie Band and leave it in place for about a day (using RubberBond).
[Availability and clarity of the Instruction Manual
(For first time users) The thickness of the Motorcycle Grip is obviously different between the Axel Side and the Clutch Side (the Axel Holder is made thinner), so please do not be in a hurry. If you remember the above without Instruction Manual, I think you will not make a mistake in installation.
[Notes]
Not particularly
Well, there are two types of people in my group, those who apply Bond and those who don't, but I am the one who applies Bond because I don't want the grip to turn while driving.
If Bond is applied, allow about a day for the Pond to dry.
[ITEMS TO BUY TOGETHER
If you are a Bond painter, you should buy a strong RubberBond.
You can buy them at motorcycle supply stores, Webike, or even at your local home center.
[Opinions and requests to Manufacturer
The Large variation is helpful because it lineups a wide variety of grips.
Thank you for your continued support
Responses
Other reviews
It reduces vibration and may make you less tired?
[How is it used?
I installed this product along with a Refresh of the Handlebar area of the vehicle I purchased.
Was the one you received as per Image?
I bought this after checking the actual product at a Motorcycle supply store and it is as Image.
Was the installation difficult?
Just apply a thin coat of Rubber Bond to the inside of the Grip, and then screw it into the Handlebar.
How was your experience with it?
The material itself is soft and reduces some vibration from the Handlebar.
The Grip feel is also good, and combined with the above, helps reduce fatigue.
[Included Parts:were they on?
Quantity:Pair (for Left and Right) I think the Grip is like a Large Grip of any Manufacturer.
[Was there anything that disappointed you?
Maybe it's the color, but the dirt is very noticeable.
Because of the soft Material, durability may not be an option to some extent.
0Other items that may be useful include
Point and hang of installation
In winter, it may be easier to work with a slightly warmer temperature.
After I install it, I use Tie Band to tighten both ends and the middle and leave it for 1 day to fix it.
[Availability and clarity of the Instruction Manual
The thickness of the grips on the Axel side and Clutch side are obviously different, so even without the Instruction Manual, I'm sure you won't make any mistakes...
[Notes]
Not particularly
Well, there are two types of people in my group, those who apply Bond and those who don't, but I am the one who applies Bond because I don't want the grip to turn while driving.
[ITEMS TO BUY TOGETHER
If you are a Bond painter, you should buy a strong RubberBond.
[Opinions and requests to Manufacturer
The Large variation is helpful because it lineups a wide variety of grips.
Thank you for your continued support
View detail
It's kind of expensive.
I changed the Handlebar and this one too. Blue to match the body color. View detail
Outclassing!
Select to match the Green Light of SEROW.
In the firmness of the quake-resistant GelMaterial feel of softness that seems to relieve the fatigue It is.
The Grip has a GRU pattern of unevenness on the surface of the grip, and it feels very comfortable to grip. It is not.
If the current one doesn't work, I'll buy the same one again.
View detail