Reviews
without a problem
Cheap ones are dangerous, so I wanted to buy a proper one.
It's working fine
View detail
Used on XJR1300.
I used this part for the OEM return of the OEM Carburetor on my XJR1300 RP01J. This part was cheaper than ordering from YamahaOEM Parts. View detail
Fits: Others For TDMR Carburetor Large body (Φ36-Φ41), Others TMR Carburetor for large body(Φ36-Φ41)
CarburetorOH
Replaced the original old part and no problem. View detail
good quality, perfect fit
I used one of these for my needle seat on my dragstar 1100 carb. works great. Don't forget to lube it just a little to ensure a better seal. View detail
Used for DJEBEL250OEM TM28SScarburetor
Important!
As the title suggests, it was used for the OEMcarburetor of DJEBEL250.
We are using the OEM version on a DF200 DJEBEL, but the 250 setting is too rich, so we are changing a lot of things.
This carburetor is well The sticking is terrible." If the setting is removed from Large, the Idling suddenly becomes extremely high. [Color] It should be possible to clear.
As you can see from the size comparison photo with the persimmon seed, this is a very small part, but it is an important part that changes large.
First of all, just by replacing the number one footpeg, it becomes a completely different Character! I was surprised at this.
As per Net article. [Because it's OEM, we can OEM pimp it out. The only thing is that it can be used physically. Naturally, each Machine has different settings, so it will not run at all without modification.
It is still not a perfect score, but it is now running for a large amount of time.
It is not only Main and Pilot, but here, it is quite Large.
Replacement is recommended.
But the expense for each setting... I don't have a choice.
View detail
Used for TS200R OEMcarburetor
It was diverted to the TS200R OEMcarburetor.
OEM Parts, but they are already out of production and halfway I had no choice. This is the situation after purchasing and installing the product.
After the replacement, I feel that the sticking feeling in the low to mid speed range has diminished.
Since the Needle Jet had also been replaced earlier, we were not able to achieve a large improvement, but we are satisfied with the results.
We will continue to devote ourselves to maintenance so as not to let the fire of the 2 stooges die out.
View detail
Valve
This is a common mjn Overflow countermeasure Parts. View detail
It's a cheap one
I have seen numerous MJN24s and almost all of them were torn up in this area.
On the other hand, I suppose I could get by with tattered ones, but they are cheap and I feel better if I change them.
View detail
Used for TS200R OEMcarburetor.
As the title suggests, it was used for the TS200R OEMcarburetor.
This hose connects the Float chamber on the Left Side of the car body to the top of the carburetor.
Many people tend to use transparent Universal Hose here, but I think it is important to use the parts set by the manufacturer.
It is not just a hose, but has a small main jet-like component inside.
I also appreciate the sobering fact that the top and bottom Clips are attached.
And the price is 1/6 of SEA BASSOEM.
View detail
Used for TS200R OEMcarburetor
As the title suggests, it was used for the TS200R OEMcarburetor.
When we purchase used equipment, we replace the Main, Pilotc., and all the parts.
We believe that replacing them with new ones will improve the peace of mind by an order of magnitude.
When replacing the driver, it is recommended to prepare a solid driver and remove it by pressing 8 times and 2 images, as it is easy to damage the large driver.
We have prepared the OEM Product No. this time. We are looking forward to seeing the changes after the actual ride.
View detail
Used for TS200R OEMcarburetor
Used to Restore TS200R.
OEM parts were too expensive, so we replaced them with these parts.
O-rings are also securely attached.
Since they are carburetorManufacturerOEM parts, the quality is second to none.
I think it is safe to use.
The packaging, in the case of SEA BASSOEM Parts, it comes in a transparent blind cap-like component. However, this product comes in a Vinyl bag, folded several times. If you are a nervous person, it might bother you. I am a Large sturdy person.
Since there was no image on the Product Page, I am attaching an image.
I hope this is helpful to you.
View detail
Used for TS200R OEMcarburetor.
As the title suggests, it was used for the TS200R OEMcarburetor.
The used car we purchased at a certain auction had a roughly bent float, perhaps because they did not want overflow, so we introduced a new one. The shape is a little different, but we assembled and tested it and found no problem at all.
I think it is also a good idea to replace old units as much as possible.
View detail
Used for TS200R OEMcarburetor
As the title suggests, it was used for the TS200R OEMcarburetor.
SEA BASSOEM Parts would cost twice as much. Inexpensive (But no...) The Large change is very helpful.
Use, as a matter of course. OEM parts from carburetorManufacturer are truly reliable!" We feel that this is a good thing.
View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
Used for TS200R OEMcarburetor
As the title suggests, it was used for the TS200R OEMcarburetor.
As I mentioned in the washer section, I think many people lose the O-ring and washer here.:I think it would be much safer to replace it with a Set.
This is a part that can be recommended for Large change.
View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
Used for TS200R OEMcarburetor
OEMcarburetor for TS200R, as title suggests. (TM30SS) Used for
I suspect that many people blow out the washer and O-ring here when cleaning the carburetor.
In fact, our TS, which we obtained used, didn't have any either.
After installation, the engine starts with a single kick, and the idling is also firmly in place.
I am really happy with the replacement.
View detail
Used for TS200R OEMcarburetor
Used for TS200R OEMcarburetor.
Washer is the root of the Main jet.
It feels textured after many years of use, but it is new and pleasant to use this one.
I don't know if it affects performance, but I feel good about it.
View detail
For TS200R Restore.
I used it on a recently acquired TS200R TM30SScarburetor.
OEM parts would be terribly expensive, but with these MIKUNIOEM parts, I was able to get them for less than 1/10th of the price.
The OEM that came with it had been soaked in Gasoline for so many years that it had turned a BeefCurry color, beyond candy-like. The product we purchased is white like a fluorescent bulb or LED and is full of cleanliness.
As for the details of the important parts, I think they are completely interchangeable, with exactly the same shape.
I am very happy with the replacement.
View detail
Used for TS200R OEMcarburetor
As the title suggests, it was used for the TS200R OEMcarburetor.
Actually, it is SEA BASSOEM Parts and it is discontinued.
They are not exactly the same, but they are completely compatible.
I believe a new replacement will restore performance.
View detail
Reliable ManufacturerOEM Product Quality
Used on SX125R under Restore.
Older motorcycles can often be restored by replacing the inner parts of the carburetor with new ones.
Since they are OEM parts of CarburetorManufacturer, they are very safe to use.
View detail
Used as Inner Parts for OEMcarburetor
Used in Restore on SX125R.
It is an OEMcarburetor, but it is VM24SS.
By replacing the carburetor inner parts with new ones, we believe that the idling will be solid, and the car will be able to be used for long distance travel with peace of mind.
MIKUNI's Pilot Jet has the same shape and comes in several sizes.
Caution.
View detail