Reviews
Stress resolution at stoplights
When connecting to the Ignition coil, you need to pull out the original cable and insert it into the Ignition coil, which requires a lot of force.
The wiring routing from the side box used the hole at the bottom of the box, not the hole indicated in the Instruction Manual (Honda seems to have changed the routing spec. for the existing wiring. (Honda seems to have changed the existing wiring routing spec. and the wiring could not be routed.)
For the Attachment to be attached to the Handlebar, we had prepared a different Manufacturer's Installation Base, but the Included Parts:was pretty solid, so we are using it as is for now.
View detail
Used on ninja250
ninja250 (2015) It was installed with the company's 65029 at
The low side is connected using the included White colored Electro Tap. No on/offSwitch was installed since there is no vehicle inspection.
I was a little dissatisfied that I could not do wiring without cutting into the headlight unit, but I am generally satisfied with the brightness and parenthesis after installation.
View detail
Used on ninja250
ninja250 (2015) It was installed together with the company's 65030 at
I was a little dissatisfied that I could not do wiring without cutting into the headlight unit, but I am generally satisfied with the brightness and parenthesis after installation.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB
Useful to have for CUB beginners!
I have a lot of experience with motorcycles, but this is my first time as a CUB owner and, of course, my first time riding a Rotary Mission.
If you're not constantly aware of what speed you're in, you'll never know.
It's okay to stop and look for Neutral or 1st gear after you've stopped.
When you stop and immediately start moving, you don't have that kind of time to spare... you're in a hurry...
Since I have been wearing it, I am no longer in such a hurry, and I can drive more comfortably because of it!
The installation is not too difficult as long as you follow the instructions in the instruction manual.
If the cowl can be removed, it would be Large sturdy.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom
Monkey 23 years old
Monkey 23 model without gear position
There is no problem installing this.
Can be installed without the need for gear input ------------------------------------------- --------------- Monkey 23 years without gear position It's not too much to mount it with this It can be mounted without having to enter the gear Powered by Google Translator
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom
Good Good Purchase Review
I haven't installed it yet, but I'm purchasing it on the recommendation of a 23-year-old Monkey. It'll work out well. I'll use it well. I was disappointed that the Monkey didn't have a gear position, so I had to leave it to a professional store, but with this product, they say that if you just install it, it will know the gears on its own without having to teach you. Please note this about the product~~ - -------------------------------------------------- ------- It's still mounted, but it's going to be a 23-year-old Monkey recommendation. I'll use it well. Monkey has no gear position. Powered by Google Translator View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB
We need to devise something outside of the Instruction Manual.
The disadvantage of the CT125's most Large is that the Headlight is very dark.
It is an unbelievable Level to sell a moped motorcycle with such a dark headlight at a legal speed of 60 km/h. How can you sell a moped motorcycle with such a dark headlight?
Various people were getting by with Fog Lamps and Auxiliary Lamps, and I had an Auxiliary Lamp with Cutline. It was bright, but I could not switch between high and low, so I had to endure either Situation.
I found Headlight by chance, and although I was worried about replacing the whole unit, the work manual with pictures made it possible for me to replace the unit successfully, although I misunderstood some parts. I think it would have been less hurdle if there was a more detailed explanation of which connection means what.
I would have liked some tips on how to make the holes in the HVAC Larger. I worked by trial and error, so the finished product was quite dirty. I think it would have been cleaner if I had used a holed saw from the beginning. Well, it doesn't matter because it is invisible.
By the way, I chose 3000K (Halogen color). I am satisfied with the good visibility and the classical image because there is a lot of fog in this area.
View detail
This makes nighttime driving safer.
The headlight of the CUB (JA07), which was dim, is now super bright. It is wonderful!
But it was difficult to install and I asked Shop to do it.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB
Effectiveness realized!
I asked the shop to install it at the same time I bought my CT110 HUNTER CUB, and although there is a gap between the actual shift position and the shift position when the shift change is not made properly, there is no particular problem. I am more than satisfied with it because it is easy to see Light, visibility is good, and I can Riding comfortably! The price is a little bit high, but I think it is a good product that you can feel the effect more than that. View detail
Safe on night roads.
Compared to the dangerously dark normal light, I can finally drive on decent roads at night. View detail
Fallen cannibals
Installation requires some knowledge of motorcycle tinkering, etc.
The alarm sound is perfectly Large. I think it is effective against theft. (I don't want to be in a situation where the alarm is actually sounded though…)
What I like most about this product is that it is Key less and easy to operate.
No more keys to mess around with and get in the way, and they can be turned off when not needed.
Quantity:I would have been happier if the sound when setting was smaller.
View detail
Peace of Mind at Start
Dax125 is rotary type and it is hard to know which GEAR you are in, so you have to be careful when you start at a signal. The Protec Indicator picks up the GEAR signal from the coupler, so it is easy to install without any adjustment. View detail
Even I could install it.
I installed it on my Dax125.I have a long history with Motorcycle but this is my first time with Rotary style GEAR. How many feet now? I'm afraid I'll get distracted and have an accident before I get used to it. So I bought it as soon as possible, and I am a beginner in maintenance Level with reference to Instruction Manual and YouTube. (MONKEY and Glasses Wrench) Even I, a diverse person, was able to install it without any problems. The performance and material of the product are also solid. I don't think I will regret buying this product. View detail
Anti-Theft Measures
The car is old, so there is not much space for installation, but the Body and Alarm were Compact, which was a big help.
Other anti-theft measures use a REMOTE CONTROLLER or a key, which increases the number of Included Parts:, but since it can be turned on and off only by operating the key on the Body, there is less stuff to carry around.
During the time lag after the operation, the Motorcycle Cover and other lock chains can be applied, and I felt that this was thoughtful of the user.
View detail
Anti-theft measures
The Body was also Small Type and fit well in an old car with little storage space.
Unlike other products, there is no need to replace batteries or use a separate remote controller.
View detail
Mounted on the Hunter Cub.
When the learning module that indirectly expresses the gear stage by measuring the existing rpm and speed is installed on a curve, it directly detects the part where an error occurs (or does not display) in the gear display when the clutch drops or stops during gear shifting. It was very convenient because it was bitten by the beater switch sensor and showed the gear immediately and quickly. There is no detailed harness wiring guide, so it's a bit unfriendly, but I installed it myself. -------------------------------------------------- -------- When the clutch drops or when the gear shifting is mounted on the curve indirectly exhibited by measuring the existing RPM and the speed, the clutch drops or when the gear marks when the gear marks is stated. It was very comfortable to show the gear immediately by being bitten by the bitter switch sensor. There is no detailed harness wiring guide, so it is a bit unkind but well installed. Powered by Google Translator View detail
Fits: その他
Finally, I was able to get the Tachometer signal.
Thanks to this product, I finally got a Tachometer signal.
SR400 is MinusIgnition, so it is difficult to get a signal from Plug Cable, but with this product, I can easily get a signal and the Universal Tachometer responds perfectly.
It's easy to install and this is great!
View detail
To prevent theft.
Security On with Motorcycle key (A squeaky sound will be heard.) I think it is convenient to be able to off
Installation should not be difficult for someone with some experience.
View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB
ideal
It's a remarkable difference. 。 It is worth the Cost. View detail
Fits: KAWASAKI GPZ900R
Phantom 7-speed measures
Since there is no dedicated mounting bracket, I used a homemade bracket made by cutting an aluminum plate to mount it on the Meter.
Instead of using the included PG110Sensor, we soldered and connected DAYTONA's Electric Type Speedometer Conversion Adapter Twin Type.
The operation is perfectly fine, and although there is a slight time lag after a shift change, the display is easy to see, and I thought it would be a useful part if it were available.
View detail