Reviews
You can blow it.
Installed on SEROW250Final edition.
I felt the difference during the Bypass test run after installation.
For me, it's not so much the sense of Torque increasing.
'Oh, it blows better now.' It was like that.
Throttle also feels somewhat easier to open.
I thought to myself that this must be the impression that everyone is saying that it feels good.
View detail
Fits: KAWASAKI Ninja ZX-636, KAWASAKI Ninja ZX-6R
A little modification is needed to attach the Heat Guard!
Installed on a 2022 ZX6R. The middle pipe itself is easy to install, the OEM exhaust pipe side is installed with a liquid gasket since the OEM gasket will not fit. The silencer side is exacty with the OEM gasket. The bracket to be installed on the body is also without modification and fits with the OEM bolt, but no nut is included.
The problem is that the Heat Guard does not go on as is. The bottom two bolts fit, but the bracket that holds the guard on the top side has a gap of about 1cm on the front side, so I bent the bracket with pliers and installed it.
Sound became louder below 6000.
View detail
Exhaust pressure is important.
I used to wear it.
I wanted the sound, the look … cheaper than other companies, Stainless Steel, and a beautiful shape.
However, I have had the experience to realize that exhaust pipes are very important parts.
good point
Lower cost than other companies.
●Stainless steel allows for weight reduction.
Silencer's original sound can be produced.
A bad point
TorqueDown is severe.
The normal exhaust pipe is intentionally thickened to muffle sound and control exhaust pressure.
It will look better, but I think NORMAL is the way to go for the exhaust pipe unless you are doing an EngineBore up or something.
View detail
It looks good, but it is not good.
I thought that the OEM exhaust pipe had a muffling effect, so it might not be producing the original sound, so I replaced the exhaust pipe.
Stainless Steel because of its beautiful browning.
As a result, I reverted back to OEM …
good point
It is more explosive.
Lightweight because it is made of stainless steel.
Cheaper than other companies' products.
The baking color is beautiful.
A bad point
Torque is lost due to too much loss.
It is difficult to give a carburetor setting.
As a result, the exhaust pipe is not only a normal multi-pipe to muffle the sound, but also to produce exhaust pressure, so it is understandable that the Torque is lowered.
It's cool, but if the performance is Down, it's subtle, isn't it?
View detail
Quantity:2pc. Purchase Set eyes
This is my second order.
The Chamber (expansion chamber) part of the first one I had on came off due to vibration.
When I looked at what I received this time, I found that the reinforcing Plate was well addressed.
This is a relief.
Additional notes
This time, I ran for a while with the product out of place, but when I received the product, I was able to compare the ride.
I was still able to firmly feel the thickening of the low-speed Torque.
View detail
It's a bit expensive, but the sutra is the same as OEM and the presence is there.
The price is a bit steep, but the product is good. View detail
Fits: KAWASAKI Ninja ZX-636, KAWASAKI Ninja ZX-6R
Fair enough; quieter than M4GP.
It is on 21MODEL.
The sound from Idling to 7000 RPM is fatter than the OEM lunchbox.
After 7000 RPM, it may be LARGE and the same as the OEM lunchbox? It seems quieter than when I had a straight M4GP tube.
As for the sound change, the characteristics of the Titaniumium silencer seem to have been emphasized more. (More dry high frequencies are emphasized)
As for the sound, I am satisfied.
However, the Bolt hole position on the Heat Guard did not match, as is to be expected since it is made overseas.
We had no choice but to bend the Heat Guard by force to fit the position and set it.
Also, there is no Bolt nut to hold the Exhaust Bracket, so I purchased one at Home center.
Also, both in-outs are thicker in diameter and quite Tight.
It was necessary to slightly widen the exhaust pipe connection with Pliers.
The positional relationship with the exhaust pipe and silencer is the same as OEM, so we are happy to hear that they are perfectly aligned.
Good appearance as it is clean and polished. Welds are messy but clean.
Overall, I can recommend it.
View detail
![POWERBOX[PowerBox]Pipe](https://img.webike-cdn.net/catalogue/images/92416/06_TS.jpg)
Interferes with Hepco & Becker Skid plate
As per Title, it will interfere with Hepco & Becker's Skid plate and 1 pc of the 6 mounting bolts on the Plate will not work.
The screw part of the mounting bracket of the plate interferes with the Pipe, so it has been shaved off.
The Limit is also the Pipe and Plate immediately adjacent to the Engine head.
The output at low and mid speeds has become Linear, and the behavior at the beginning of the throttle opening seems Mild.
Gasket on the Normal silencer side was not needed.
Gasket installation on the Head side was more time-consuming than expected with only one person.
View detail
H2Slip-on SilencerPipe
I purchased this product as a H2Universal Intermediate Pipe. The accuracy and texture were good, but the price seemed a little high. View detail
Maybe a little long.
I bought a used Exhaust System and used this one as a joint.
I think that the Exhaust System, which I personally wanted to use, would have been nice if the tube length was a little shorter. (Well, I'll process it.)
Also, if the OEM exhaust pipes have been used for a long time, the joints of the exhaust pipes are rusted and will not stick, so it is necessary to remove the rust once and for all.
Also, the dimensions themselves are assembled Tight, so it will take a lot of effort to match the Pitch re as shown in the image.
If possible, it would have been nice if the width of the Exhaust System side was a little narrower...
View detail
High cost performance. The handling is quite different from that of NORMAL.
The NORMAL exhaust pipe rusted, so I wanted an exhaust pipe that would not rust.
I had no hesitation in looking for a Stainless Steel product, as I did not need up to Titanium for my commuter spec. serow250, and it would rather float.
We chose this one because of its affordability.
The replacement work was done by myself.
The installation accuracy is good and the connection with dB'sSilencer is fine.
I thought the handling was close to NORMAL, but it actually goes above that.
Since only the exhaust pipe was replaced this time, I thought there would be no change in exhaust sound, but in fact there was.
If you listen carefully, you can hear a hard, kinky sound mixed in with the exhaust note.
Perhaps the Tappet sound is echoing, but this is just an imagination.
The sound of the same quality is rather Larger Than it sounds from the Air Cleaner side when the Seat is off.
In any case, the sound when running remains the same.
I don't think there is any particular impact on Power's output.
If a sensitive person rides it, there might be some difference, but the commuter Rider can't tell.
We are not waging a commuting Battle for every minute of the day.
Anyway, it is significant that we got a Pipe that does not rust.
In this respect, we are grateful for the high cost performance of these Parts.
View detail
It uses in combination with an official megaphone muffler.
It uses in combination with an official megaphone muffler. View detail
Fits: HONDA GORILLA, HONDA MONKEY, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Although only the exhaust pipe only for DOHC can be used, if compatible with the muffler of each company, I will feel that he can enjoy himself more.
Although only the exhaust pipe only for DOHC can be used, if compatible with the muffler of each company, I will feel that he can enjoy himself more. View detail
There is effect
Fast delivery time … lower prices.
The effect was as per other Reviews.
I'm not much of a believer in these products.
Torque up at low and medium speeds and the effect is definitely there.
I'm glad I bought it.
View detail
Good as per Review.
Fast delivery time
And it only takes two hours to install!
The effect is an overall acceleration improvement…
I was able to satisfy as per Review.
View detail
The delivery time was fast … the texture was great!
Inventory was clear and delivery was as indicated on the order.
Installation is as easy as in the Review!
The instruction manual was easy to understand, and the work went very well.
However
Liquid Gasket better be ready! Maybe.
I used it just in case.
I'll do a test run tomorrow to see how it performs.
The rating is unchanged.
View detail
Great!
CRF250L〈s (MD47) It is easy to install by removing the Seat and Right Side exterior. View detail
Absolute Recommendation, Cospa is the best!
Torque is thicker and the grade is higher. View detail
![Front Pipe [For Full Exhaust].](https://img.webike-cdn.net/catalogue/images/42509/cbr250rr_front_pipe_street_a_TS.jpg)
o2Sensor is not received.
I bought this to use in combination with a cbr250rr yoshimurar11. o2Sensor did not arrive and I gave up on installing it myself and am looking for a store to do it for me. I saw in the reviews before I bought it that I needed an extension for the o2Sensor, but I wanted a WirusWin exhaust pipe. I have given up on customizing my own wiring etc., so I think it would be more efficient to check with a store that can install the exhaust pipe for me when I purchase this product. The product itself is a beautiful color and I can't wait to hear the sound when I install it. View detail
Low speed Torque up
After replacement, low speed Torque up is felt.
It has become a Motorcycle that is easy to ride. I think it's a cosy one too!
View detail