Reviews
Fits: HONDA GROM, HONDA GROM
nice sound
I bought it to enjoy the change of sound because it was cheaper on Sale.
Sounds more pleasant than OEM.
Looking forward to Touring!
View detail
Fits: YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA MT-125, YAMAHA XSR125
I seem to have a connection with YOSHIMURAExhaust System.
There were three criteria for choosing Exhaust System.
Government or JASMA certification (←Can be installed at YSP)
Short Type
As cheap as possible
The one that satisfied all three of these requirements was YOSHIMURA's CYCLONE.
Since the product is not yet on the market, the detailed evaluation was chosen based on speculation and expectation.
View detail
Carbon is beautiful.
Replacement from YOSHIMURAR11, Carbon has a beautiful luster.
Yamamoto racing's Titaniumium exhaust pipe was installed, and it was too much trouble for YOSHIMURA.
I had tried to use an inner silencer, etc., but it was still bothersome.
Beams with inner silencer as well as exchange YOSHIMURA
The volume is a little lower and the exhaust system is longer, so the experience when driving is better.
End Baffle replaced and Rivet removed for more quietness
I also installed NANKAI's 2-way but it started pivoting so I went back to OEM.
(NOJIMA:Repair Tail Baffle LOCK-ON 58mm FASARM-PRO can also be installed.)
Exhaust spring does not have Anti-Vibration Rubber, so KITACO Anti-Vibration Rubber 10mm was cut in half and used.
I am satisfied with the overall comment Large change.
View detail
Fits: KAWASAKI Z 650, KAWASAKI Ninja 650, HONDA CBR650 R, HONDA CBR650 F, HONDA CBR500 R, HONDA CB650 R, HONDA CB650 F, HONDA CB500 F
ArrowBaffle
The volume is not too large, not too small, and the sound is thick. View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
OEM same etc.
Quantity:1 Set of 2pcs. to Spare when returning to OEM.
It's good enough
View detail
Fits: KAWASAKI Z900RS Cafe, KAWASAKI Z900RS
Good browning of Exhaust pipe
Neck is a bit expensive because of Titaniumium full exhaust.
Other than that, no complaints.
There are two catalysts in the middle of the pipe, so if you want to make the sound more loud, you can remove them.
I am enjoying it at a decent volume with both places removed.
View detail
Sounds and looks great!
After replacing the block tie ya, Torque was installed to compensate for the thinner Torque.
I was torn between this and SP Tadao, but I chose this one because of its simple, never-ending design.
Installation is simple and easy for those who can remove the exterior.
Exhaust Gasket and Liquid Gasket (for the joint between exhaust pipe and silencer) must be prepared in advance.
A simple Instruction Manual is also included, but it does not describe the Torque for tightening the Flange nut.
We had no choice but to install it, making sure there were no rattles or exhaust leaks.
Shorter and a little more inward than NORMAL, giving it a resisted look.
Simple and good design that you will never get tired of.
Exhaust Heat Guard's "Over" The removal of the "+" is not so much as to be noticeable.
Exhaust System sound is crisp and dry.
It is comfortable while Idling and running, and I like it very much.
Compared to NORMAL, the volume is a little more Large.
Torque is there from the start to low and medium speeds, and it seems to be a little Plus to the thinner tire by the tire exchange.
It responds to the opening and closing of the Axel in a straightforward manner, making it easy to operate even at low speeds.
It also turns Smoothly to high RPM, but the Rev limit comes first.
In 4th gear, it sounded like it was stuck all the time, which was grating, so I changed the FSprocket to 15T to lower the rpm.
The Torque is slightly thinner at the start of the run, but not enough to be bothersome, and the top speed is slightly higher.
When I rode after the installation, there is White smoke and a Chemical smell that Biglizes at the traffic light.
By the time the car has traveled 50-100 km, it will no longer appear.
View detail
Fits: APRILIA SR 50 R (PIAGGIOEngine), APRILIA SR 50 FACTORY (PIAGGIOEngine) Model:Injector
of poor quality
I received it, but it is poorly made and has a lot of wounds. View detail
It looks cool!
I changed from the OEM Exhaust Cover and am happy with the improved look.
No modification is required, and the Bolt can be used for OEM applications.
Recommended if you are buying for looks and not expecting weight savings.
However, I think the price is a little high for this ….
View detail
Fits: HONDA Monkey125
After all, sound is a Large thing ?????
Since it is a vehicle that stimulates the five senses, the sound is more important than the performance, and although the sound of NORMAL is not bad, it is still not enough. After much consideration, I decided on YOSHIMURA because I wanted to make the Normal style Large.
The product arrived in safe and sound packaging with Large strange care.
I watched the work on YouTube and read the Instruction Manual, but it took me 1.5 hours to complete. the bolt holding the engine was very hard, but I used the big Torque wrench from for Vehicle and managed to loosen it. It was about to rain, but I was impressed after the test drive. This is it, this is it. I'm looking forward to Touring on Saturday!
View detail
Fits: HONDA CT125, BMW G310R, HONDA MONKEY125, HONDA Cross Cub110, YAMAHA XMAX
Looks good, Parenthesis good, good to have ?????
I would run without it, but I would definitely burn myself without it. When I test drove with it on, the calf of my right leg was constantly hitting it.
I think it is made of Dry Carbon, but the price is too high compared to Exhaust System, I thought it would be better to use Wet Carbon to keep the price down.
View detail
RC51 Ladybird over exhaust
These are my second set of Ladyabird exhaust. My first set were the low mount GP polish titanium exhust 300mm length exhaust cannisters. These I much prefer, Oval 400mmm length for the looks and the exhaust tone. Surprised they came with a very small baffle, but the exhaust sound with baffle out is much quieter the the 300mm Ladybird exhaust. Really prefer the looks of the long oval "VS" short round cannisters .. Ladybird fit and Quality top notch. Thanks again Web japan. Kept me inform on estimate delivery and when shipped. View detail
Power will be increased, but it cannot be driven on public roads.
I installed it on a 21 year old HPS300. DECATALIZZATORE As stated, this is an exhaust pipe for Race without a built-in catalyst. It cannot be used on public roads.
KITACO Exhaust Gasket XH-09 was used.
The weight of the product is about 2 kg, and since the OEM exhaust system weighs about 5.2 kg, a weight reduction of a little over 3 kg can be expected. The power improvement in the low-speed range can be felt quite clearly, and the feeling of shortness of breath under 4000 rpm is gone. The volume is very large.
The OEM Exhaust End was used as is for installation, but (perhaps due to the newer model year of the Both Sides, or perhaps due to individual differences in the product itself) the joint with the Exhaust End was too short, and the tightening with the band was not secure.
Joint gasket is made by KITACO JPK-3. (φ37×φ32) However, the outer diameter was too large, so we could not install it properly. Since it was troublesome to find a substitute, we used heat-resistant aluminum tape wrapped around GRUGRU. It looks a little awkward, so I am thinking of looking for a Gasket of about φ36×φ32.
View detail
Fits: HONDA CBX400F, HONDA CB400SF, HONDA CBR400F, HONDA CB400FOUR, HONDA CBX400F, HONDA CB400SF, HONDA CBR400F, HONDA CB400FOUR
Exhaust manifold Gasket
I chose the cheapest one and it was perfect - no problems and no gas leakage. View detail
Fits: HONDA CB400SF, HONDA CB400SB
MORIWAKIShort TubeFlange
One of the four I ordered had to be shaved a little to fit, probably because of the BALI. For some reason, one of the bags was also in a different bag. View detail
MORIWAKI split collar
I ordered this due to the loss of my cracked collar. After installation, it was perfect. View detail
The price forgives everything.
First of all, the design is very pretty.
The sound is noisy and whistles.
The noise level is definitely higher than the original, so I am satisfied.
It's very quiet, but has presence.
Even if you go riding late in the evening, you don't have to worry about your neighbors.
There are some regrets, but the price forgives everything. -------------------------------------------------- -------- First of all, the design is so pretty. The sound is noisy and whistles. The noise level is definitely higher than the original, so I am satisfied. It's very quiet, but has presence. Even if you go riding late in the evening, you don't have to worry about your neighbors. There are some regrets, but the price forgives everything. Powered by Google Translator
View detail
Yoshimura Silencer Bracket Set for ZX-25R
This was a replacement for the standard exhaust bracket that came on this bike. Not that there was anytrhing specifically wrong with the stock one but it is big and a bit weird looking and the customer wanted to add some bling factor. FInding the right Yoshimura one for this model was already gotten by the customer who asked for this specific one. Not a problem, this makes my life easier not having to search for compatible ones. The price from Webike was the best I could find anywhere. With some other parts in my basket already, I had them all shipped together which saved on the shipping cost as the other parts were really small. My order arrived in 5 days from being shipped which is exceptional to say the least. The silencer bracket cme in the Yoshimura packet and had everything needed to switch the original to this. The bolts were present and well machined. The bracket itself is finished with a lovely satin black paint and feels great to touch. Fitting was surprisingly easy as it is literally a couple of bolts and that's it. The overall look of the silencer with this bracket on is superb. Very nice. View detail
Loved this one.
Climbing a hill in my neighborhood after replacing the Exhaust System; accelerates one gear higher than OEM (by feel). View detail
I have an exhaust leak.
The exhaust was leaking and I had to replace it with a new part. I could have used the OEM product, but when I was looking for one, I found the Other Brand Product at a lower price, so I bought the cheaper one. View detail