【OVER RACING】Cigar Pipe up Exhaust Full Exhaust Exhaust Review
Sounds and looks great!
After replacing the block tie ya, Torque was installed to compensate for the thinner Torque.
I was torn between this and SP Tadao, but I chose this one because of its simple, never-ending design.
Installation is simple and easy for those who can remove the exterior.
Exhaust Gasket and Liquid Gasket (for the joint between exhaust pipe and silencer) must be prepared in advance.
A simple Instruction Manual is also included, but it does not describe the Torque for tightening the Flange nut.
We had no choice but to install it, making sure there were no rattles or exhaust leaks.
Shorter and a little more inward than NORMAL, giving it a resisted look.
Simple and good design that you will never get tired of.
Exhaust Heat Guard's "Over" The removal of the "+" is not so much as to be noticeable.
Exhaust System sound is crisp and dry.
It is comfortable while Idling and running, and I like it very much.
Compared to NORMAL, the volume is a little more Large.
Torque is there from the start to low and medium speeds, and it seems to be a little Plus to the thinner tire by the tire exchange.
It responds to the opening and closing of the Axel in a straightforward manner, making it easy to operate even at low speeds.
It also turns Smoothly to high RPM, but the Rev limit comes first.
In 4th gear, it sounded like it was stuck all the time, which was grating, so I changed the FSprocket to 15T to lower the rpm.
The Torque is slightly thinner at the start of the run, but not enough to be bothersome, and the top speed is slightly higher.
When I rode after the installation, there is White smoke and a Chemical smell that Biglizes at the traffic light.
By the time the car has traveled 50-100 km, it will no longer appear.
Responses
Other reviews
Nice and solid Torque feel from low rpm.
[How is it used?
I am mostly a city rider (commuter), and only occasionally do day-touring trips of several hundred kilometers.
I don't know about the higher rpm range as I am still breaking in and am running at 5500 rpm.
Was the one you received as per Image?
The product is exactly as shown in the Image, with clean weld marks and a solid product.
Also, the Silencer was quite heavy, although the total weight was quite heavy.
Was the installation difficult?
Remove the side cover (where it says CT125) and the Engine Under Cover.
The bolt hidden in the upper nut and side cover of the rear suspension, and the two nuts on the engine side can be removed.
OEMExhaust System is removed.
If the Engine Guard Pipe is still attached, the exhaust pipe cannot be removed without rotating it slightly.
Installation is not difficult if you follow the instruction manual.
I think the exhaust leaks from the joint between the Exhaust pipe and Silencer.
How was your experience with it?
Idling was a bit of a surprise because of the volume there.
(I'm only careful in residential areas in the middle of the night)
The sound is quite loud until 2-3000 rpm, when it becomes semi-crazy.
Up from there, after concluding, you can enjoy a pleasant Sound.
Above all, Manufacturer's claim that Flat TorqueCurve that can be manipulated at will. That is exactly what it means!
The exhaust system is not only low speed range but also low speed range.
The overall feeling of Torque has been improved, and driving in the city has become easier.
Engine braking is also considerably reduced, making throttle work at very low speeds easier.
Since the exit is toward the outside, I don't think the blinker will get burnt.
The Heat Guard is quite small, but I think it was thoughtfully placed where it is needed and sufficient.
(Only on the Rear side, if you lower your leg straight down, the Silencer and Large thigh may come in contact with each other.)
[Included Parts:were they on?
Everything needed for installation is included except Gasket.
[Was there anything that disappointed you?
Idling and starting volume is quite Large, so I would be careful in residential areas.
(Proximity is 85dB, so it's a bit on the large side compared to other products.)
Items to buy together
Gasket, Liquid Gasket, Parts cleaner (for degreasing)
View detail