Reviews
NS400 Carb rebuild
Well made part fits well with no issues, replacing the original plastic part. Finish on part is good, got the replacment rubber sealing caps to complete as the original rubber had gone hard after 40 years. View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
When I changed to LED Bulb.
LED Bulb light now illuminates the front of the car. View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
Used in xr100 MOTARD
I bought this product because the OEM Product was too dark when I switched to LEDs for the Valve, and the forward illumination is much brighter than the Normal. View detail
no problem
I am very grateful for DMR's products since OEM is not available. I was able to install it without any problems. I can't say how durable it will be.
....。
View detail
Fits: HONDA NS250R, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA NS250F
It's something that doesn't appear in OEM Parts.
This part is not available in OEM Parts, so it would be helpful if you could offer it as a product like this.
Since it is tightened tightly with aluminum, it is always a part that is deformed when overhauled, so it looks better if it is replaced.
View detail
Fits: HONDA CB400SF, HONDA CB750FC, HONDA CB900F, HONDA CBR250, HONDA CBR250, HONDA CBR250, HONDA CBX1000, HONDA MVX250, HONDA VT250F, HONDA VT250F, HONDA VT250Z, HONDA VT250Z, HONDA STEED400, HONDA VF400F, HONDA NSR250R, HONDA NSR250R, HONDA NS400R
Diversion to Honda GB500
Gasoline leakage from the Cook is expensive in GB500 because the Fuel Cock is a non-resolving Type.
Processing is required, but I appreciate that it is inexpensive and problem-free.
View detail
Very Nice Kit
Received the kit quickly and was very impressed with the quality. Some modifications required but easily done by a local engineer. Very happy with the purchase. View detail
Exchange Recommendation
OEM Parts Needle bearing can still be ordered.
I replaced it with this product after watching DMR-JPAN's video.
The engine can be replaced without dismounting the engine by draining the mission oil and removing the shift spindle.
Easily replaceable with Pilot bearing puller.
Oil seal is also included, so it is nice not to have to order separately.
I just replaced it so I don't know how durable it is.
I didn't have any difficulty in getting GEAR out or Shift in my vehicle.
We are not sure if there will be any change, but since the vehicle is over 30 years old, we recommend that it be replaced considering its age and deterioration.
View detail
Ponting is OK!
[How is it used?
NSR250R that was RacerSpec. from the time of purchase. (MC21) I chose this product for the public road Spec. return of the
Since the handlebar switch had been cut in various ways before, I decided to buy it if I could just pop it in rather than going through the trouble of following the wiring one by one.
Was the one you received as per Image?
Everything in the product description came with one of the items.
Was the installation difficult?
It is easy to replace the original Handlebar Switch Coupler and the Connector from 6V MONKEY/GORILLA Main Harness to Relay.
The switch on the handlebar side was perfectly secured, including the position of the projection that stops the switch from turning around.
Only the wiring is a little messy, but as long as the RCValve motor is well avoided, I think Large is sturdy.
How was your experience with it?
The Handlebar Switch that originally came with the product did not light up the Headlight and I did not want to follow the Wiring, so I replaced it with this product and it was perfect.
(Wiring has been tweaked a lot from the original, so only the Position lamp and Horn are taken separately, so it has not been confirmed.)
The Switch operates smoothly, without any hardness or snagging.
I thought that an OEM product would be fine, but the price of a used MC21 Handlebar Switch is quite expensive in the auction market, and I had been interested in the Low beam Relay of the same brand for some time, so I decided to purchase this product.
I am satisfied that Headlight's Wiring problem, which had been troubling me for about 10 minutes of work, has been resolved.
[Included Parts:were they on?
All the items in the photo are included, so the work can be completed by simply popping them in.
[Was there anything that disappointed you?
None at all!
【Review】
New Handlebar Switch with ponting, Low beamRelay and Quantity:Set
It absolutely has to be OEM or I hate it!" I personally felt that it was well worth the price, unless you have a particular preference for a particular product.
View detail
Fits: HONDA NSR75, HONDA NSR80, HONDA NSR50, HONDA NS-1, HONDA NS50F, HONDA MTX80, HONDA MTX50, HONDA MBX80, HONDA MBX50, HONDA CRM80, HONDA CRM50, HONDA NSR75, HONDA NSR80, HONDA NSR50, HONDA NS-1, HONDA NS50F, HONDA MTX80, HONDA MTX50, HONDA MBX80, HONDA MBX50
About MechanicalSeal
Thank you for your prompt response.
I put it together as soon as it arrived. 。 Water leak cured.
I guess it's hard if you don't have a certain amount of knowledge. ??
View detail
Fits: その他 , HONDA NSR250R, HONDA NSR50, HONDA NS400R, HONDA NS250R, HONDA NS250F, HONDA MVX250F, HONDA NSR250R, HONDA NSR50, HONDA NS400R, HONDA NS250R, HONDA NS250F, HONDA MVX250F
That would be handy
Used for MechanicalSeal installation on water pump.
Using an installer is more secure than tapping in a Socket.
These SSTs are commercially available and helpful for amateur maintenance.
View detail
For maintenance above the waist of MC21
[How is it used?
I purchased this product to clean the engine piston and replace the piston ring, as well as to renew the gaskets.
Gasket and O-ring of MC21 are Quantity:It is in a set, you don't forget to buy it, and it is inexpensive.
How was your experience with it?
I was a little skeptical because of the low price, but so far the Large seems to be sturdy. But so far, it seems to be large and sturdy.
CylinderBase, Head Gasket and ChamberGasket were used, but there is no leakage.
Naturally, the size is also Exactly, and the cost was lower than with OEM parts.
How did it compare to other products?
Each Gasket is almost always available with OEM parts, but it is quite expensive to get them all, so they were very helpful.
[Points to note]
Naturally, it is necessary to ensure the prevention of misassembly and Torque management.
In addition, since we do not know which fine O-rings are for which, we have no choice but to match them with the actual ones.
【Review】
It is convenient and inexpensive to use this product for maintenance above the waist.
You only need to do your best to identify the O-ring, but if you don't have to force it to be replaced, you can keep it as a Stock.
View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R
still necessary
Essential tool to remove GEAR to ask for CrankshaftOH.
It is possible to remove it with a piece of aluminum, but it is still this one.
View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R
It's definitely better to have it.
[How is it used?
NSR250R (MC21) I purchased the RCValve to clean the RCValve of
I thought about forcing myself to pull it out or get the materials from a hardware store, but I decided to buy it if I could do the work easily at this price.
Was the one you received as per Image?
The product was as shown in the pictures.
There is an M5? reverse thread cut into the bolt center.
How was your experience with it?
In a word, it was God Items.
We worked with the Engine on the car body, and it is easy to work in tight spaces.
Quantity as per the product description:Just Set and turn Nut and RCValve will come out.
The RCValve was removed when the nut had just gone around the Bolt, and I realized that both the collar and Bolt were of a calculated length.
Once you get the hang of it, you can remove RCValve in less than 5 minutes, so it's a shortened workflow.
[Points to note]
I don't think so.
I also saw an IMPRESSION that you would like an Instruction Manual, but I don't think there is such an easy task, but....
How did it compare to other products?
Not that it was a product, but I thought about pulling it out on my own somehow.
But I bought it if I could work reliably at this price.
【Review】
I personally thought that if there is work to be done to pull out RCValve, it would definitely be better to have it.
It is by far safer than attaching a nut and pulling it out with an iron, and considering RCValve's breakage risk, I don't think it is a part to be stingy with.
View detail
Fits: HONDA NS250F, HONDA NS250R, HONDA NSR250R
Carburetor came back to life.
When I was doing OH on my carburetor, I couldn't find a drain bolt for Both Sides at any of the shops. I was very impressed with the Carburetor that came back to life. View detail
![Thrust Needle Bearings [Repair]](https://img.webike-cdn.net/catalogue/images/96512/gp016_01_TS.jpg)
Really great product that performs well.
Very good price, bearings are really good quality,japan made.A great product that I would recommend for any bike.Very basic. Bearings decent quality, but plates thin and soft. Noticeable performance, but I think the more expensive models are not softer and more durable. Buy again, possibly because of the third price of more expensive items.Highly recommened. View detail
Cheap, fast, OEM same etc.
OEM Gasket 18293-KV3-004 SpringAExhaust pipe and the same etc.
There is no problem in using it. Incidentally, we use a thin coating of heat-resistant liquid Gas, including when using OEM products.
The good thing about this product is that it's inexpensive; OEM Product is 4,268 as of the date of posting. (@ 2,134) The price is about double at
OEM Product is also available now, Delivery time from order:on delivery, usually around 5 days. It was
If you are not very particular, this product is fine.
View detail
Fits: その他 , HONDA NSR250R, HONDA NSR50, HONDA NS400R, HONDA NS250R, HONDA NS250F, HONDA MVX250F, HONDA NSR250R, HONDA NSR50, HONDA NS400R, HONDA NS250R, HONDA NS250F, HONDA MVX250F
very good
The price is a little high for the frequency of use, but it fits tightly and does not leak. I was not sure whether to purchase it or not, but I am glad I did. View detail
Can be used in the same way as OEM Product
[How is it used?
Used in Engine as well as OEM Product
How was your experience with it?
I have no problem at all using it.
How did it compare to other products?
I was not sure about the steel one, but I'm glad I went with this one.
[Points to note]
For installation, it is necessary to have enough skill to disassemble the Engine.
If you are not a professional, it is better to ask a specialized Motorcycle store for help.
It's good.
View detail
NSR250R (MC21) Position lamps in the
[How is it used?
NSR250R purchased used. (MC21) I purchased this product because there was no position lamp in the headlight of
When purchasing a T10Socket, I compared this product or M&H Mats Stripe, No Brand product made in China.
Bullet Type Terminal eliminates the need for wiring (Required for 6V MONKEY/GORILLA Main Harness side) So, I chose it because it comes in two packs and the rest seemed reliable since it is a Brand that produces a variety of NSRParts.
Was the one you received as per Image?
It was grayer than it looks in the picture. (Naturally, there is no problem in actual use.)
Bullet Type Terminal was also installed without problems.
Was the installation difficult?
Anyone can replace the Valve without tools by simply plugging in the 12V and T10 size Valve and attaching it to the Headlight.
There is no problem with the fit with Valve and Headlight, and it seems to have a moderate resistance and does not seem to shift.
Wiring on the 6V MONKEY/GORILLA Main Harness side has been changed since I purchased the vehicle in my case, so I am not sure about the OEMHarness modification.
How was your experience with it?
Naturally, the light came on without any problems.
Valve is M&H Pine Stripe's WedgeSingle Bulb [Color] Clear (https://www.webike.net/sd/1557693/) I used the
I have just started using it, so I don't know about its longevity and deterioration, but so far I am satisfied with it.
[Included Parts:were they on?
This is the only product as shown in the photo.
[Was there anything that disappointed you?
Not particularly
【Review】
China No-Brand products are of questionable reliability, while those of a good manufacturer are expensive, but this product is positioned right between the two.
In the end, China products are just less expensive, like 4-packs and 5-packs. I don't need that much. I don't need that much." but this product is just right in a 2-pack.
For old cars, it can be used as a position lamp, meter lamp, etc., or for repair in case of emergency.
View detail