Please login to check coupons
Product Detail
Specification
[Product Description]・Handlebar switch: 1 pc.
・Terminal: 9 pieces
・Joint harnesses: 1 pc.
・Relay: 1 pc.
・Rubber: 1 pc.
Description
DMR-JAPAN original specifications!
Replacement for NSR250R (MC21).
Also a countermeasure for minor trouble!!!
The low beam of the MC21 consumes a large amount of power (70w with 35w x 2 lamps), but since electricity is output directly from the steering wheel switch without using a relay, the load on the HI/LO switch is large and there are minor problems that can easily burn out the switch.
Therefore, as with other Honda 2-light bikes, a relay is installed on the low beam side to protect the steering wheel switch, allowing the use of high wattage bulbs with peace of mind.
The light relay is a stock product of the motorcycle manufacturer.
This is the same standard relay used on the HI side in NSR250R.
This product is manufactured at a factory in Taiwan that manufactures switches for major parts manufacturers and motorcycle manufacturers.
The use of high quality materials allows you to feel the difference in texture, weather resistance, and durability of the resin.
[How to install the Relay KIT]
Remove the coupler from the handlebar switch, insert the relay kit, and ground the green wire.
Secure the relay with a cable tie.
There are two main ways to route the wires, so please refer to the pictures and route the wires freely so that there is no strain on the wires.
The "relay bracket" makes installation easy and smart.
Replacement for NSR250R (MC21).
Also a countermeasure for minor trouble!!!
The low beam of the MC21 consumes a large amount of power (70w with 35w x 2 lamps), but since electricity is output directly from the steering wheel switch without using a relay, the load on the HI/LO switch is large and there are minor problems that can easily burn out the switch.
Therefore, as with other Honda 2-light bikes, a relay is installed on the low beam side to protect the steering wheel switch, allowing the use of high wattage bulbs with peace of mind.
The light relay is a stock product of the motorcycle manufacturer.
This is the same standard relay used on the HI side in NSR250R.
This product is manufactured at a factory in Taiwan that manufactures switches for major parts manufacturers and motorcycle manufacturers.
The use of high quality materials allows you to feel the difference in texture, weather resistance, and durability of the resin.
[How to install the Relay KIT]
Remove the coupler from the handlebar switch, insert the relay kit, and ground the green wire.
Secure the relay with a cable tie.
There are two main ways to route the wires, so please refer to the pictures and route the wires freely so that there is no strain on the wires.
The "relay bracket" makes installation easy and smart.
Caution
*When using the DMR main harness, please use the MC18 switch since the harness has already taken measures (when using a relay).*There may be changes in product specifications due to the manufacturer's reasons.