Reviews
Fits: HONDA VFR750, HONDA VFR800, HONDA VTR250, HONDA VTR1000 SP-1 RC51, HONDA NSR250R SE, HONDA NSR250R, HONDA NSR250 MC18 MC21, HONDA CBR250 MC19 MC22
cheap and has a bad finish
I bought ai-net fuel tank cap to replace the old cap that was damaged. The new ai-net cap is cheap and has a bad finish. The new tank cap is raised higher with the fuel tank. View detail
Fits: HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CBR250R (MC17/19), HONDA CBR1000RR, HONDA CBR250RR (MC22), HONDA CB1000 SF (Big One), HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA NC750S, HONDA CB400SUPER BOLDOR, HONDA CBR600RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR1000F
Accuracy of holes is not very good.
I bought this for Repair because the Knee Slider part of my CBR900ROEMfootpeg was cracked.
The texture at a quick glance is the same as the OEM Product, but the accuracy of the holes in the footpeg may be poor, and there is a feeling of pinching when inserting the pin.
I couldn't push it in by hand, so I finally tapped it in with a plastic hammer. (OEM Product's Pin and Footpeg are Smooth in this area)
I drove for about an hour after assembly, and there is no particular discomfort.
View detail
Spring Mounted Hook
It is used for spring removal and attachment of the Exhaust System.
The price is reasonable, and it can certainly be made Compact since it can be split in two.
It is not used that often, but it is good to have 1 pc. to take the spring on and off for maintenance.
View detail
spare
When I replaced it with a MainCable from another company, Mini Flat Type Fuse was used, so I bought this for a spare.
I don't think it will be used that long, so it would be helpful to be able to purchase the A I want through Single Item sales.
View detail
Fits: HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CBR250R (MC17/19), HONDA CBR1000RR, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSR600, SUZUKI GSR400, HONDA CBR250RR (MC22), HONDA CB1000 SF (Big One), HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
cheap
This is the second time I have purchased this product. Last time, the rubber broke after about 10 months of use. It is not durable. I think it depends on how you think because the unit price is cheap. I don't mind the hollow caps feeling while driving. View detail
Expectations for Waterproofness
I bought this as a Vinyl to put inside the Seat because the Seat absorbs water in the rain.
Not yet available as it requires Air Tuckeretc.
I pre-purchased the product because it is inexpensive.
I hope the water stops sucking in….
View detail
Mini Flat Type Fuse
When I replaced it with an external 6V MONKEY/GORILLA Main Harness, the one used was Mini Flat Type Fuse, so this is for spare parts.
With 30A, the frequency of replacement is not so frequent, so it is sufficient to have 1 pc. as a spare, so it is sold as a Single Item, which is very helpful.
View detail
Fits: SUZUKI Address V100, SUZUKI ADDRESS V100
OEM compatible Exhaust System for professionals
I purchased this product because the OEM was getting rusty and rusty.
It seems that some people can pontificate and some can't. I was the latter.
If the Bolt is passed through the Flange on the Exhaust System side, the Bolt on the Engine side cannot be installed.
I made a mistake here by setting the Flange on the Exhaust System side to a long hole.
As you can imagine, it is thick and large, but the bracket that attaches to the side of the engine should have been a long hole. The reason is that there is a gap between the exhaust port and the exhaust pipe.
Second, the Bracket holes are not flush with the upper and lower holes. A 3mm Spacer was needed between the upper hole and the Engine.
Finally, the bolt at the rear end of the Air cleanerBox could not be installed. The reason is, as usual, the welding position of the Bracket Gap….
We had no choice but to cut it off and weld it back on again. And the heat plate attachment part (Received Nut.) The welding was done by TIG welding.
It was a labor-intensive exhaust system, but it contributed greatly to the improvement of my own technical skills.
Since a semi-automatic or TIG welder with at least 0.6mm wire is required, the work skill is considered to be PRO class.
It would be difficult for an amateur to hit an Exhaust System that has been removed.
View detail
Fits: HARLEY-DAVIDSON FXLR DYNA LOWRIDER, HARLEY-DAVIDSON FXSTC SOFTAIL CUSTOM, HARLEY-DAVIDSON XL1200, HARLEY-DAVIDSON SPORTSTER FORTYEIGHT, HONDA VT1100, HONDA VT1100, HONDA valkyrie, HONDA valkyrie, KAWASAKI Eliminator 400, KAWASAKI Eliminator 400, KAWASAKI Eliminator 400, KAWASAKI Eliminator 750, HARLEY-DAVIDSON 883, HONDA Shadow Custom, HONDA shadow, HONDA shadow slasher, SUZUKI Desperado X, YAMAHA DS, YAMAHA DSC, YAMAHA Virago XV920
It looks reasonably luxurious, but...
It looks good, but Valve is no good. It ran out in half a day. It is better to prepare it beforehand. Still, for the price, it is satisfactory and a good value for money, so I can recommend it. View detail
Single Item
Single item sales are not too expensive, so it is good to be able to purchase the type and quantity you need.
Since it is Fuse, I don't have to worry too much about performance, etc.
View detail
It's cheap, but...
The Mirror is cheap and not well made, and I was bothered by the sound of the Mirror shifting. I use it by inserting a rubber in the gap and holding it in place. Considering the price, I guess it's not so bad. View detail
Fits: SUZUKI GSX750 KATANA, SUZUKI GSX1100S KATANA (KATANA)
Good cost performance, but installation requires light modification
I think the quality for the price is good.
OEM moldings were also installed.
The mounting holes seem to be slightly misaligned with the BRKT, so small modifications such as making the holes long are necessary. It could be corrected by scraping with a round sandpaper.
View detail
It is soft.
It is quite soft and I used it for serving bean jam, but when I sat on it, it was crushed and did not make the seat height UP. View detail
Fits: KAWASAKI KLX150, KAWASAKI KL250, HONDA XR250, HONDA XR200, HONDA XLX250, Others , SCORPA T-RIDE 250F, YAMAHA CT175, SUZUKI SX200, KAWASAKI 250TR Bison, HONDA XLR200, HONDA MTX200R/RII, HONDA CRF150R, HONDA CRM250AR, HONDA SL230, HONDA FMX650, HONDA CRM250R, HONDA XLR250, HONDA XL-DEGREE, HONDA XR230
The pattern is cool, but …
[How is it used?
Seat was torn and I bought it as a Replace.
Was the one you received as per Image?
The Pattern was cool, WaterproofSeat was included, and I was happy with it when it arrived.
Was the installation difficult?
Installation, but due to Seat's material, it could not be installed without stretching and wrinkling.
You can attach Wrinkle by blinding it.
How was your experience with it?
Since it is used for off-road driving, it has Wrinkle and no Grip, so I gave up using it.
However, it looks Parenthesis good.
[Included Parts:were they on?
It comes with a WaterproofSeat, which is used in conjunction with another Seat.
[Was there anything that disappointed you?
As I said, there was no growth, so that was disappointing.
View detail
Comfortable Touring!
[How is it used? Mounted on Off car
Was the one you received as per Image? As you can see in the image
Was the installation difficult? Easy, though. Alignment takes time.
How was your experience with it?
Advantage:The windshield effect can be felt from about 60 km/h. Without the screen, the driver becomes tired easily after 80 km/h, but with this product, the physical strength decline can be sufficiently reduced. It is even more effective when the temperature is low.
Disadvantages
In foggy or rainy weather, the Screen will fog up or water droplets will form on it, obstructing visibility.
The screws that connect/secure the Windshield to the Bracket have flat tips, so they get crushed when they are put on and off repeatedly, and as a result, the screws on the Female side cannot be secured. As a result, the screws on the female side were crushed and could no longer be secured.
[Included Parts:were they on? Aligned, but Bolt tip is flat, so replaced with a commercially available chamfered one.
[Was there anything that disappointed you? Because it is heavy, it shakes to a certain degree.
View detail
Fits: SUZUKI GSX750 KATANA, SUZUKI GSX1100S KATANA (KATANA)
It's not bad, but not bad for the price.
It is cheap, so it is easy to crack if you close it a little too tight, but the price is Reasonable, so I am satisfied with it. View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
The packaging was very good, but ...
The packaging was careful and secure. but some rust was visible. A little bit.
So I applied a little rust remover and it worked fine.
It needed a little work, but performance and other things don't seem to be a problem.
We feel this is a good product for those who are particular about Normal look.
View detail
It takes patience.
After about 2 laps, there will be a little gap between the rim and the tire, so you can insert the tire lever and pry it out. View detail
Easy to use
Just the right Size for an eye fan.
The Touch panel can be used while the case is still in the case.
Cushioning properties are good, so the phone is not easily scratched and is very durable and waterproof.
View detail
cheap
Easy to use Size.
It also has excellent elasticity, so a certain amount of large size can be covered.
It can also be used for stable loading of cargo.
The Hook is easy to fix to the car body and prevents Wound from entering.
View detail