【ai-net】Secondary Air Pipe with Spec. OEM Type Exhaust System Review
Fits: SUZUKI Address V100, SUZUKI ADDRESS V100
OEM compatible Exhaust System for professionals
I purchased this product because the OEM was getting rusty and rusty.
It seems that some people can pontificate and some can't. I was the latter.
If the Bolt is passed through the Flange on the Exhaust System side, the Bolt on the Engine side cannot be installed.
I made a mistake here by setting the Flange on the Exhaust System side to a long hole.
As you can imagine, it is thick and large, but the bracket that attaches to the side of the engine should have been a long hole. The reason is that there is a gap between the exhaust port and the exhaust pipe.
Second, the Bracket holes are not flush with the upper and lower holes. A 3mm Spacer was needed between the upper hole and the Engine.
Finally, the bolt at the rear end of the Air cleanerBox could not be installed. The reason is, as usual, the welding position of the Bracket Gap….
We had no choice but to cut it off and weld it back on again. And the heat plate attachment part (Received Nut.) The welding was done by TIG welding.
It was a labor-intensive exhaust system, but it contributed greatly to the improvement of my own technical skills.
Since a semi-automatic or TIG welder with at least 0.6mm wire is required, the work skill is considered to be PRO class.
It would be difficult for an amateur to hit an Exhaust System that has been removed.
Responses
Other reviews
ai-net Secondary Air Pipe available Spec. OEM Type Exhaust System
Replacing the OEM made it lighter and sounded more like a 2-stroke.
We are not sure how long OEMChamber will last, and we have a motive to purchase it while we can.
Performance-wise, it is not that different from the OEM, but I am satisfied with the lighter weight and the more Chamber-like appearance.
The fixing bolt holes were correctly positioned with no gaps, and there is a secondary air pipe for the Second Type Model CE13A, so installation was no problem.
The fact that Gasket is included is also appreciated in a humble way.
View detail
RustRustOEM and Exchange ~.
OEM was full of Rust, so we replaced it.
Installation is a breeze (laughs).
I also appreciate that it comes with Gasket.
The design is chamber-chic, so it looks good.
I noticed during installation that it is lighter than OEM.
Replacement was a breeze.
View detail