Reviews
No problem
There was a lot of white smoke from the Exhaust System, so I replaced the Jet, Needle, and Gasket of the Carburetor as part of my efforts to determine the problem. After all, it was not a problem with the Carburetor because the cause was on the oil pump side, but after replacing with this Fuel Conditioning Kit, it blows up smoothly without any particular problem.
I was aware of the existence of this kit, but was hesitant to purchase it because one of the past articles on BuLogger pointed out that the accuracy of Jet was not good. However, I found no problems in the reviews of other users, so I purchased the kit this time, and the setting went out without any problems.
Not only is the cost performance high, but it also includes parts that are difficult to obtain from OEMs, which is appreciated by old car drivers.
View detail
Adjustment
Carburetor seems to be in bad shape and I thought it might need maintenance, cleaning and reconditioning.
Complete set Quantity:Set, because it is in a Case, Quantity:Is this a better deal than buying a Single Item?
View detail
to Refresh the carburetor
[How is it used?
TZr250R (3XV1) used for Carburetor's Overhaul of the
I used the 3XV4 one the other day because I wanted to finish it in a hurry, but I also purchased this product because I have two carburetors and overhauled it when it arrived.
Was the one you received as per Image?
There were no shortages etc. as shown in the pictures.
Also, I mentioned that the 3XV4's Impression had the wrong Top gasket, but this one had the correct one.
How was your experience with it?
Basically, the only difference between the 3XV4's and the Jet's was the number of the Jet, which I had worked on once and had no problem using.
The precision aspect of the parts is also good with no problems.
OEM Parts are expensive, so we recommend this price for a new carburetor.
[Points to note]
When replacing the ThrottleValve Guide Gasket, there is one bolt that prevents tampering, so a tool is required.
【Review】
The precision of the parts is solid, and a complete set of jets is included, so I recommend changing the settings.
This is the best way to Refresh, as you can feel good about running with new parts.
View detail
To Carburetor's Overhaul
[How is it used?
TZr250R (3XV1) I bought it for.
There is another one for 3XV1, but that one wasn't in stock and Jet's count was different, so I bought this one.
I cleaned the carburetor of a car that hadn't been used for several years, but it was overflowing, so I replaced the jets as well as refreshing the carburetor.
Was the one you received as per Image?
There are three more cases inside the case, and the small jets are properly divided into small ones.
Was the installation difficult?
Only the Main jet of the Right Sidecarburetor does not have the same hand as the OEM of the 3XV1, but other than that, no problems at all.
Also, in the Instruction Manual, the main nozzle is supposed to be entered from the bottom, but it is actually entered from the top.
How was your experience with it?
The engine was very difficult to start with just cleaning, but after using this product, it started with a single kick.
Overflow is cured and Idling is stable, so there is nothing to say.
One disappointing point was that the Top cover gasket on the front side had the one on the back side.
【Review】
I had no problems with the accuracy of the parts, the functionality, etc.
As of February 2022, OEM parts for the 3XV Needle Valve will still be available, but they will cost $5,401 per side, so if you think about it, this product seems cheap.
The top cover gasket on the front side was wrong, but other than that, I am satisfied.
View detail
3xc
Japan shipment arrived in 4 days, replaced carburetor overhaul pack vibration is less, a lot of low torsion enhancement. including 4 oil needles can adjust 4 kinds of mixing ratio debugging satisfaction. View detail
Fits: YAMAHA TZR250R
It is as expected
The OEM Carburetor Inner Parts were discontinued and I was having trouble with them
The quality of the Gasket and O-ring is the same as the OEM
Also, the instruction manual is carefully written and the packaging is perfectly fine, and you can feel the difference between the Large land product and I think
I'd be very grateful if you could line up your old Parts like this!
View detail
Fits: YAMAHA TZR250R
It is an absolute effect
Obtained vehicle (3XV4) He was concerned about deterioration of Jet due to Tank being rusted, Quantity : Pair (for Left and Right) I also used it together.
I heard rumors that the key Star's Jet kind is slightly erroneous when it is Mikuni type carburetor, but there was not any problem at all.
OEM count + DFRStainless Steel Chamber lightly dandruff like lying from around 3750 rpm.
Even if putting the OEM count of this kit after cleaning, if dandruff is bad, please doubt the power jet. Our car was clogged severely.
View detail
Fits: YAMAHA TZR250, YAMAHA TZR250
High performance but Reasonable
Using Key Star's Fire Kit for many years OH
Although Trouble is still absent, I am satisfied with the change in Large!
Noteworthy is this Reasonable price with this accuracy!
There are several types of Jet, too, just by OH
As long as we can set the seasonal setting without it!
This time ThrottleValve Guide Gasket Set items
Purchase (Actually it is not necessary to Rose up to here, but every corner
It was able to clean) but I am building this world wide
Even so, I think it's only the key Star
Key Star is truly appreciated for the old car fans
Manufacturer is ♪
If you want to Rose Throttle valveGuide, you need Special Tools
So be careful!
By the way Instruction Manual is also kind, no need to worry about Setting!
Also good buildability of Case and good storability Goodwell
I think that everyone is convinced that it is a domestic product!.
Everyone who is interested! Because there is no mistake in performance
Let's support by being purchased by all means!
View detail
Fits: YAMAHA TZR250, YAMAHA TZR250
KEYSTER Key Star Temperature Kit & Throttle valveGuide
KEYSTER key is Star Fuel Adjustment Kit & Throttle Valve Guide Gasket. It was better than buying OEM Parts Number, so it was good.. I also wanted to purchase. View detail