Reviews
Double the ease of knee grip
Doubles the ease of Knee grip!
It is not a type of mussel, but it has a firm and secure Grip feel.
The Large and shape are perfect, and the adhesive is quite strong.
Recommended Parts!
View detail
Parenthesis good!
I like Largeisa and Design very much.
The thickness is about 3mm, so I think the Body can be well protected.
There is no backing paper included for positioning the paste, so you have to measure and paste it yourself. It would be great if a backing paper was included.
View detail
viscosity
When I remove the Cover during the next touring after applying the adhesive, the pad at the bottom is fluttering. Already no adhesion.
It was put on by a Shop Service person. I wouldn't write this kind of comment, but it's a pity that PRO put it on.
I'm wondering if I should buy the same item.
View detail
I have a good knee grip.
[How is it used?
Purchased because the tank was too large and difficult to grip by the knees.
I chose the Pro type because I thought it should look less lumpy.
Was the one you received as per Image?
I think it was as per Image.
I thought it would be like this since it is Rubber or Silicon.
Was the installation difficult?
A cleaning sheet before pasting is also included.
Size was also no problem, as it is dedicated to the car model.
How was your experience with it?
It is not rugged, but it does serve as a firm non-slip surface.
[Included Parts:were they on?
The cleaning sheet and Instruction Manual are included, but the Instruction Manual is only available in English version.
[Was there anything that disappointed you?
I think it is a little expensive, but I will use it for a long time, so it is OK.
View detail
Quality is better with Stomp Grip.
I had installed the Stomp Grip but the seat on the side cowl side was too small and didn't hit my knee area, so I left the Stomp Grip on the tank side as is and replaced it with the EasyGrip on the side cowl side. As other reviewers have said, the EasyGrip is a large size, and I am satisfied with its functionality, but the EasyGrip looks like it is cut out from a large Seat to fit the car model, but the StompGrip has no warts on the edges and is molded one by one, so the texture and appearance are parenthesis. The StompGrip has no warts on the edges and is molded one by one. It's a choice between functionality and appearance. View detail
Fits: KAWASAKI NINJA400 (2014-), KAWASAKI NINJA250R, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR
Cover the cheapness of OEMs
I put it on for appearance, but since I have a bar lock key and a traffic safety talisman attached to the main key, I thought it would also prevent scratches on the fuel cap when refueling. I think it will also prevent scratches on the fuel cap when refueling.
I think the evaluation of quality and cost performance will depend on durability.
View detail
Fits: HONDA VFR800X, HONDA VFR800F, HONDA VFR1200X, HONDA VFR1200F, HONDA CBR900RR, HONDA CBR600RR, HONDA CBR600F, HONDA CBR400R, HONDA CBR1000RR, HONDA CB750, HONDA CB400X, HONDA CB400SF, HONDA CB400SB, HONDA CB400F, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1000SF, HONDA CB500X, HONDA CBR500R, HONDA VTR1000F
sense of unity
The last time I bought and installed the same Black color, I thought it would be more consistent with the same color, so I decided to buy a Blue color before the Point expired.
I like the texture but the Design is so-so.
View detail
The dignified appearance is atmospheric.
I use the IMSBig tank's OEM fuel cap, which does not have an arrowhead retaining mechanism, so no matter how hard I push it in, it comes off after 30 minutes due to the reaction force of the hose. The adhesive strength of the Aron Alpha is definitely ??????????. I like the way it stands up to the Chocolate. View detail
Fits: HONDA VFR800, HONDA Rebel 250, HONDA Rebel 500, HONDA CBR400R, HONDA CBR650F, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA 400X, HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB650F, HONDA CBR1000RR, HONDA NM4, HONDA GROM, HONDA CBR500R, HONDA CB500X, HONDA VFR800XCROSSRUNNER 125, HONDA CBR1000RR, HONDA CBR250RR(2017-)
Carbon Wind
I am happy with the tightened look.
The work is also easy, just paste it on.
It would be better if it were cheaper.
View detail
Fits: HONDA CB1000R, HONDA CB1300S, HONDA CBR650F, HONDA CRF1000, HONDA CRF1100, HONDA CRF250RLAC, HONDA GROM125G, HONDA CBR250RR, HONDA CB400SF, HONDA CBR650R
To PetitCustom
I think it is good because it looks different.
It would be better if it were cheaper.
View detail
Reliable EasyGrip
We used EasyGrip about 3-4 years ago when we switched from StompGrip.
Since then, EasyGrip has been my choice, and I personally think that EVOType has better gripping power than Stomp.
Recommended for people who drive on circuits and mountain passes, and for sports drivers.
View detail
Genuine Kawasaki Fuel Tank Pad for Z900
This is something every fuel tank should have on them from factory. Unfortunately, sometimes scratches occur and this makes a real mess of a beautiful tank. This was exactly what happened to this Z900. I just thought it best bet for now to get a new tank pad which will cover the scratches and then also add protection for any future scuffs. The correct tank pad was not hard to find, I just filtered the manufacturer and then model of bike and there were a couple to choose from. I deceided on the genuine Kawasaki one as it will fit as it should do with it being made for this bike. The cost was not too bad actually and better than I had seen for sale locally. With a couple of other tank pads for other bikes, I had them all shipped together via EMS. EMS just do what they say and get your order to you quickly. Mine arrived 5 days after the shipping date which is perfect. The entire order was neatly packed in the box, the tank pads were all kept nice and flat so there was no distortion which could have been a problem when fitting. The tank pad came in a Kawasaki packet and was neatly presented. The pad itself feels very nice and smooth but does have a bit of friction due to the materials used. I was expecting a slightly more domed gel pad but for what it is, it's fine for my needs. Fitting was straight forward and when on without issue. Pleased with the purchase and hopefully, this stops any future scuffs from happening with my jacket zip. Thanks Webike View detail
Tank cap is gorgeous (laughs)
[How is it used?
Easier to open and close the cap when changing gasolines
Was the one you received as per Image?
It was exactly what I expected.
Was the installation difficult?
Yes, the first time I installed it, I had a hard time getting it to work, but I didn't have the LWrench that came with it and couldn't tighten it down.
We managed to get a Wrench that fit and it worked.
[How was it when you used it?
It looks better and is easier to open and close when refueling.
[Included Parts:were they on?
LWrench was not available, so you need to prepare it.
[Was there anything that disappointed you?
I wish it came with LWrench.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Preferably with LWrench included!
View detail
Fits: BMW S1000R, BMW S1000RR, BMW M1000RR
Tank Pad
I am very satisfied with the texture this time.
I had a good business transaction with Large.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S750, SUZUKI GSR250, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI DL1000 V-STROM650XT, SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM1000XT, SUZUKI DL1000 V-STROM800DE, SUZUKI GSX-8S, SUZUKI SV650X, SUZUKI SV650
Unique texture of OEM
Before pasting, it looked very small, but when it is actually pasted
Just size, I felt it was quintessential OEM.
The seal surface is made of aluminum sheet and is quite hard and firm. Once the position of the seal is determined, it can be attached relatively easily.
The front edge of the Seat is effective as an anti-scratch measure since the Zipperetc. of the Wear hits it.
View detail
ของแท้ ส่งตรงเวลา คุณภาพดี แพ็คเกจดี พัสดุไม่มีเสียหายครับ View detail
To prevent scratches on Tank
I bought this to prevent scratches to the Tank as it is SS.
It is not limited to this product, but it is rather difficult to make sure that the center is exactly in the center when applying.
The adhesion is neither too strong nor too weak, and I think there is a good balance between strength that does not seem to peel off on its own and weakness that does not damage the paint when peeling it off.
The size is a little larger than the cheap ones from other companies, and the cover range is wider. The texture is glossy and gives a sense of high quality, but the durability against sunlight is yet to be seen.
View detail
Fits: KAWASAKI ZZR1400 06-08, KAWASAKI ZZR1400 ABS 06-08, KAWASAKI 1400 GTR 08, KAWASAKI ER6 n 06-08, KAWASAKI ER6 f 06-08, KAWASAKI VERSYS 07-08, KAWASAKI Z750 07-08, KAWASAKI Z1000 07-08, KAWASAKI ZRX1200 DAEG, KAWASAKI ZX-10 R 06-10, KAWASAKI ZRX1200, KAWASAKI ZX-6 R 07-08, KAWASAKI ZX9 R 00-03, KAWASAKI ZZR1200
Gold looks good!
This time, I could not buy it at WeBig because they were out of stock.
I found it in stock at Naps and bought it, so I will only give an imprementation.
(It was cheaper to buy from WeBig.)
Anodized is beautiful and I liked that it was the same color as the other custom parts.
I think it is the same shade as Posh and Babyface Gold.
The installation took less than 5 minutes as I only had to replace the original Bolt.
It's good because it's easy to dress-up, but I wish the price was a little lower.
View detail
Fits: HONDA , HONDA CB500X, HONDA CBR500R, HONDA Rebel1100 DCT, HONDA CRF250RALLY S, HONDA CRF250RALLY, HONDA CBR650R, HONDA CBR400R, HONDA CB650R, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR, HONDA CB1000R, HONDA 400X, HONDA Rebel1100 T, HONDA Rebel1100, HONDA CBR650R, HONDA CB650R
Nice looking sticker on the tank!!
For my 2023 Honda Rebel 1100 - very simple to apply, just makes sure alcohol wipe the surface first and then line up the stick with the gas tank. You might experience some unaligned screws holes on the sticker, in that case use a heat gun gently on it then use hand move the stick to the proper positions. Overall - nice looking products but for almost $20 I think is little over price, and not sure how long it last. View detail
Sataniya Tank Pad
The Tank pad design is sleek and aerodynamic, which makes the tank to appear bigger. The tank pad shape is also comfortable to clamp the rider's legs onto ensuring bike control in corners. View detail