Reviews
Convenient!
I purchased this to plug the OEM Mirror hole to make it a bar end mirror.
I didn't have a reversed screw on hand, so this was very helpful.
The length is Exactly and is in Beautiful condition with no water flooding and no rust.
View detail
Ideal for Fixing Mirror's Bolt
This is not the Mirror of Napole On, but I bought it because the other company's Mirror bolt became rusty. The feature that the Washer made of plastic is attached, and Mirror can be fixed in a good feeling. View detail
Fits: HONDA PCX125, HONDA PCX150
No effect.
I bought it 3 years ago (the product number at that time was MV112B, priced at 2,700 yen) and installed it.
It looked dark when it was installed, but it became even darker with age.
The Right one came off immediately, but the Left one was difficult to remove.
Only the surface sheet was removed and a clean surface came out.
Did you put it up wrong? So I looked it up. "Finally, peel off the surface Seat. There was no explanation for this.
I liked the look of it when I first put it up.
Be careful when you install it, because the visibility will be bad after 3 years.
When I peeled off the glass, there were still some glues on the Mirror, but they could be easily removed by glass cleaner.
View detail
good
It looks dark in the photo, but in reality it's more like a light green light, which makes it easy to see the rear of the car in daytime or nighttime.
I heard from someone I know that Blue is dark, so I went with Green Light.
View detail
For Window shade
Used to hold the Master cup in place when the Mirror is removed.
If you have the Mirror Holder on the Opposite Thread Screw and you're tightening it, it's the worst thing you can do when you remove the Mirror.
It's not something you can find lying around as a standardized product, so it's nice to know that Tanax carries it.
If you have a chance to ride on a Yamaha motorcycle, such as in a grass race or running event, it's a good idea to put it in your toolbox.
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R750, SUZUKI GSX-R600
Was good
I bought it to hide the scratches on my Back Mirror
Mirror replacement was also considered, but with SUZUKIOption Parts in North America, purchase
The delivery date is ahead of schedule and I am satisfied
Easy to install, but make sure you degrease the Mirror!
View detail
It depends on the application
I bought the LITTLE CUB with a smartphone case to attach it to my Quantity in LeftMirror:Set
Unfortunately, because the BodyPlate of the product has a screw thread and a pipe on the The Pipe comes loose during and the phone tilts many times a day
When attached to LeftMirror, counterclockwise force is applied as seen from the Right of the Pipe Therefore, it comes loose
I'm going to use it even if it's glued together because it's a hassle to return it now, but if you're going to buy it, that's the point Please note
View detail
It's too dark
It's very dark, even with all the tidying up
I bought the blue one, but it's too dark
I don't think it's a problem for you to drive at night, so you shouldn't do it
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R750, SUZUKI GSX-R600
Perfect for scarring and mirrorDress-up
GSX-R1000 (L5) I'm on CanadaSpec
I bought it because I bought a used car and I was concerned about the scratches on the Mirror I inquired about the fitment, but I was told that I didn't know, so …I looked into it in various ways No, it'll fit! I bought it because I thought it was a good idea
I don't know what in the world this is a conforming inquiry for …
He said to do a little more research
The installation was completely flawless
There is double-sided tape inside, so peel off one by one and stick it on the surface patiently It's like
View detail
Fits: HONDA CB223S, HONDA Rebel1100 DCT, HONDA FTR223, HONDA FTR223, HONDA VTR250, HONDA monkey, HONDA CRF250RALLY, HONDA REBEL500, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Forza300, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, HONDA REBEL250, HONDA CB650R, HONDA PCX125, HONDA Rebel1100
I should have done this a long time ago
The NORMAL Helmet holder is a bit difficult to use
It's good because you can use the Mirror with the Helmet on it
It's just one more key, which is a bit annoying
View detail
Windshield and Knuckle Visor
The Screen and Knuckle Visor of the Asahi Windshield installed on the ADDRESS110 I bought it to combine
Because the Bolt of the windshield attachment is 4cm, when you put Knuckle Visor on top of the Bolt When I was wondering what to do about it, I found this one Spacer of Spacer caught my eye
To match the height of the Bolt, the Quantity:Pair (for Left and Right) I bought two pairs in total, one at But if I did so, I might have won Screen this time, so I made it a double pair
When I put it on, it went well Exactly So it was still the right decision to buy two sets
You can find Chinese ones on Amazon and other sites for cheap, but some of them seem to be inaccurate hellip;…
This Spacer was tightly made, too
View detail
It is easy to install.Dress-up
Because the Mirror cover has been scratched by the standing moss, it is time to replace the whole Mirror But I bought it because it is cheaper than changing Mirror and can also do dress-up I did
What made you decide to buy?
It was easy to install and was cool with Twill Weave Carbon
How was your experience with it?
Carbon is conspicuously Cool!
Size and Exactly!
Was the installation difficult?
It is easy for anyone to install as it can be attached by double-sided tape It will not come off if you take off the oil when you install it
【Please tell me the installation point and hang】
As mentioned in the Instruction Manual, Double-sided If you peel off the peeling paper of Tape and apply it to the parts a little at a time, there is no problem It is recommended to peel off both ends of the peeling paper before installation because the peeling paper may be torn off in the middle I think
[Was the Instruction Manual easy to understand?
It's not a difficult task and it's normal
[Was there anything that disappointed you?
I was a little disappointed in the build-up
Do you have any wishes or improvements you would like to make for the Manufacturer?
I felt that the molding of the edges was a bit sweet A little more care and attention to detail would have satisfied me in terms of quality
View detail
Fits: HONDA CB223S, HONDA Rebel1100 DCT, HONDA FTR223, HONDA FTR223, HONDA VTR250, HONDA monkey, HONDA CRF250RALLY, HONDA REBEL500, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Forza300, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, HONDA REBEL250, HONDA CB650R, HONDA PCX125, HONDA Rebel1100
Stable
This is a normal Mirror ClampType Helmet holder with nothing to write home about
it's the DAYTONA product, so I have no complaints about the quality and price
I'm not sure what to do with the wire, but I'm having trouble using it
View detail
man in charge
The other day, I noticed after I installed it on my motorcycle that the edge of the Carbon is on the spot [Color] There were a few areas where the Clear paint was uneven or hanging
There is a question as to whether the quality of the shipment is checked properly
View detail
Fits: HONDA CB223S, HONDA Rebel1100 DCT, HONDA FTR223, HONDA FTR223, HONDA VTR250, HONDA monkey, HONDA CRF250RALLY, HONDA REBEL500, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Forza300, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, HONDA REBEL250, HONDA CB650R, HONDA PCX125, HONDA Rebel1100
It's just a wake-up!
CRF250L mugenSpec. Mounting on.
I installed it in Right Side.
After installing, one day, on the road "Helmet disappears?" It is said, go ahead,
There was a person who was trying to bring Helmet, (I can not take it)
Excuse me but I could smile.. At first glance, I do not understand.
However, because Helmet is hooking on Mirror, Mirror will be a little dirty with the inside of helmet and kore, so be careful.
If it is summer, if you catch it after running, it will dry soon so it is Recommendation!
The position of the Helmet holder is (Handle mirror car only) If you do not like it, it will be good if you attach it to the Handlebar! However, if the car body collapses with the Helmet turned on, it will be erased by scratches ...
View detail
Solid screw for any mirrors
It's cheap and well made. Also comes with a plastic washer to prevent metal locking. The black plating is deep and thick. Whenever I have a problem with mirrors, I also come buy Tanax adapters. Totally recommend. View detail
side mirrors hole bolt2
I'm sorry that you sent me 2 not identical design bolts even though they are useable but they are not so nice to look at. i plan to buy another one set for my second bike but after this I might have to reconsider. View detail
Fits: HONDA CB223S, HONDA Rebel1100 DCT, HONDA FTR223, HONDA FTR223, HONDA VTR250, HONDA monkey, HONDA CRF250RALLY, HONDA REBEL500, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Forza300, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, HONDA REBEL250, HONDA CB650R, HONDA PCX125, HONDA Rebel1100
It's simple but safe
Helmet, Wear is multiplied by Mirror, but the attached Wire is useful.
As a burglarproof we are upset if Mirror is removed
There is a sense of security for fall prevention when leaving a bit.
View detail
Fits: SUZUKI BANDIT1250F, SUZUKI GSX1300R GSX1300R HAYABUSA
Easy to use
Until now I used a Wire type lock, but since it was taking out from Bag when I used it, it was good that I did not have troublesome work with this product View detail
Fits: HONDA CB223S, HONDA Rebel1100 DCT, HONDA FTR223, HONDA FTR223, HONDA VTR250, HONDA monkey, HONDA CRF250RALLY, HONDA REBEL500, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Forza300, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, HONDA REBEL250, HONDA CB650R, HONDA PCX125, HONDA Rebel1100
It is useful for chokei
Africa Twin's OEM has to remove Seat one by one.
Cover Mirror with Helmet and lock Helium D ring and attached Wire through the collar collar together.
View detail