Reviews
The sound from Chain has become LARGER.
The sound from the Chain (reflected from the Tunnel, side walls, etc.) seems LARGER than my previous OEMSprocket + Enuma Chain combination.
I hear a pushing sound when I push and walk, and I am more worried than dissatisfied.
The sound of pushing and walking disappeared as the distance increased, but...
With Baron Red, Chain is cheaper, but labor costs more.
If you do it yourself, you don't need to pay for labor, but you do need to pay for some parts and tools.
TotalCost is about the same
I wonder if asking the store for a Chain/Sprocket exchange would be a better deal in Total.
View detail
Fits: HONDA CBR600F, HONDA CBR600F, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR1000RR SP, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR600F, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600F4i, HONDA CBR1000RR, HONDA CBR1000RR
Disappointed by dents.
The packaging was fine, but I was disappointed when I noticed it after assembly. I decided to use it as it was since there was no problem in use, but I was really disappointed to see some dents on the Edge part. That's all I have to say. At any rate, I will never buy another SUNSTAR.
I posted it once, but it wouldn't upload, so I'm wondering if it got stuck on something?
View detail
Fits: SUZUKI SV650X, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X
I'm concerned about the sound of Chain.
Motorcycle is SV650X.
Stand on Side Stand, and then use the Quantity:Pair (for Left and Right) I rode with the Chain slack set to 3.5mm by adjusting the Adjuster scale of the "L". Juuuuurrrrrrrr." sound.
The sound stops when decelerating using the emblem or going down a hill.
The sound does not stop when the Rear sprocket is aligned with the FrontSprocket using the Chain Alignment Tool.
Whether the Chain play is set to 2? or 4?, the sound remains the same.
Fuel consumption worsens with 3?-4?-4.5mm of play, but the play is too large and a little jerky.
Perhaps the accuracy of the Sprocket is good, but only the Chain is constructed in such a way that it emits sound.
Recommended for those who do not mind Chain noise.
View detail
Fits: HONDA 400X, HONDA CB400F, HONDA CBR400R
It doesn't fit.
I'm riding a 2019 400X, and this one is listed as 2013-2019 in the Instruction Manual. I thought it was a mistake until 2018, but the Chain has been extended and the Quantity has been changed.:I bought this set to replace a set, but the Rear Sprocket didn't fit at all.
Only rear.I have applied to WeBig for a return and exchange. Waiting for reply, Quantity:I don't know yet how it is because it is a Set.
I'm sure the year designations will change in the future, but 400X2019 Riders who are looking to buy now, watch out, this product is compatible with MODELs prior to 2018. You'll get it right away, swap it out, and you'll be Touring! I quickly rose to replace it without checking it carefully, but this is what I got. I'm disappointed even though the weather is nice lol.
View detail
Fits: HONDA NSR250R SP, HONDA NSR250R SP, HONDA NSR250R SP, HONDA NSR250R SE, HONDA NSR250R SE, HONDA NSR250R SE, HONDA NSR250R SE, HONDA NSR250R SE, HONDA NSR250R SE, HONDA NSR250R SP, HONDA NSR250R SP, HONDA NSR250R SP, HONDA NSR250R SE, HONDA NSR250R SE, HONDA NSR250R SE, HONDA NSR250R SP, HONDA NSR250R SP, HONDA NSR250R, HONDA CBR250RRR, HONDA CBR250RRR
Used in Racer and bent.
I bought it because the OEM was discontinued and not available, but the weight is a little heavier due to the lack of holes in the Inner.
Then I used it in Circuit and bent it after a few practice runs.
The price is cheap, but if it's just cheap, there are Chinese ones, and I thought this one was not available.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09 TRACER, YAMAHA MT-09
ChainSprocketQuantity:Set Exchange
First ChainSprocket replacement for Quantity after purchasing MT-09:I bought it because I thought it was a reasonable set, and it was to be replaced at 32,000km, but at 11,000km I saw a helicopter on the Sprocket, so I had no choice but to replace it. Therefore, my evaluation became dissatisfied with the cost performance. The Sprocket that I replaced this time is Steel. I forgot to take a picture of the Sprocket before exchange. View detail
Fits: SUZUKI V-Strom650, SUZUKI V-Strom650XT, SUZUKI V-Strom650
I have already done Cut ? ?
It is for DL ??1000 V-STROM 650, it was clearly stated as Cut, but connecting it as it is long!
After all Cut it again and buy Joint, Let's pay attention to everyone!
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR400LTD, YAMAHA SR400S
So so
I thought it was a reliable Manufacturer, but I bought it, but the processing state was not very good. Pretty BALI is out.. Although it is made of weight reduction if it is of photograph, the actual delivered product was not different from OEM. That's a pity. View detail
Fits: DUCATI 888 SP5, DUCATI 888 SP4, DUCATI 851 STRADA, DUCATI 851 STRADA, DUCATI 851 STRADA, DUCATI 851 STRADA, DUCATI 851 STRADA, DUCATI 851 SP3, DUCATI 851 SP1, DUCATI 851 SP2, DUCATI 888 SPS, DUCATI 888 STRADA, DUCATI 750SPORT, DUCATI 750SPORT, DUCATI 620 SPORT, DUCATI 620 SPORT, DUCATI 600SS, DUCATI 600SS, DUCATI 600SS, DUCATI 600SS
The fact that its rotor thickness differed from the OEM product by 1mm bothered me a bit, but I decided to buy it anyway because it was sold at a bargain price.As a result, the rotor and the caliper were out of alignment. It can be installed, and you
The fact that its rotor thickness differed from the OEM product by 1mm bothered me a bit, but I decided to buy it anyway because it was sold at a bargain price.
As a result, the rotor and the caliper were out of alignment. It can be installed, and you can use it. But it is in fact a product for YAMAHA model that can be used for a DUCATI model if you wish. If you are to use it on DUCATI, you better purchase a 0.5mm shim set for M8.
As for its quality, I was disappointed to find a dirty scratch on the whole periphery of its back, like ones made by a grinder. I also was disappointed by its packaging, which had been just a little thick bag. I was expecting a Japanese quality. I've bought ones of BRAKING for another motorcycle a few years ago, but I think that one had a better quality than this one.
View detail
Fits: YAMAHA MT-03, KAWASAKI ZZR250, KAWASAKI ZEPHYR400χ, KAWASAKI Z250SL, KAWASAKI ZEPHYR400, KAWASAKI Z250, KAWASAKI Ninja250SL, KAWASAKI VERSYS-X 250, KAWASAKI Ninja250, KAWASAKI GPZ400R, KAWASAKI GPZ400S, KAWASAKI GPZ250R, KAWASAKI GPX250R, KAWASAKI GPX400R, KAWASAKI GPX250R II, KAWASAKI ER-5, KAWASAKI FX400R, KAWASAKI ELIMINATOR250V, KAWASAKI ELIMINATOR250SE, KAWASAKI ELIMINATOR250LX
It is exchange from an authentic positive one.It was pulled by the color and durability and purchased.Since it was the missing item, it took two months until goods came at hand. It compares that it is pure and is satisfied with lightness and c
It is exchange from an authentic positive one.It was pulled by the
color and durability and purchased.Since it was the
missing item, it took two months until goods came at hand.
It compares that it is pure and is satisfied with lightness and color.It is a subtracting point that it took time until it comes to the
hand.
View detail
Fits: HONDA BENLY 50S, HONDA Ape50, HONDA Ape50 Type-D, HONDA Ape100 Type-D, HONDA Ape100 Deluxe, HONDA GORILLA, HONDA GORILLA, HONDA Dream50R, HONDA Dream50, HONDA DAX ST50, HONDA DAX ST50, HONDA DAX ST50, HONDA DAX HONDA ST70, HONDA DAX, HONDA CROSS CUB110, HONDA CRM80, HONDA CRM50, HONDA CRF80F, HONDA BENLYCD50, HONDA BENLY CL50
[Webike Monitor] Since the gear tooth of the Sprocket was sharp when Chains were exchanged before , it exchanged. Since the Tuning was not carried out, the number of teeth of the NORMAL was used. Although it is easy to come out rather than the
[Webike Monitor] Since the gear tooth of the Sprocket was sharp when Chains were exchanged before
, it exchanged.
Since the
Tuning was not carried out, the number of teeth of the NORMAL was used.
Although it is easy to come out rather than the
NORMAL in good health, since the slot of the Plate for fixation has an angle different from a NORMAL, it interferes with a Shaft and cannot use the Flange bolt of a NORMAL.
By
, it fixed to the ordinary Bolt by the common & Spring washer.
Except it, because it was satisfactory, it was slightly regrettable (-_-;)
View detail