Reviews
It is Cool to have it.
At first, I thought it would be fine without it, but then I thought, well...
I put it on because I felt like it wasn't enough, but it's better to have it.
View detail
It got easier to ride
The width of the Seat has become much slimmer, and I have the impression that this has improved the footing of the Seat.
Cushioning did not feel inferior and I did not get tired over long distances.
View detail
Fits: KAWASAKI KLX230, KAWASAKI KLX230S, KAWASAKI KLX230SM, KAWASAKI KLX230R S
God Seat for KLX230ROwner, also recommended for KLX230
The Seat height of the KLX230R is 925mm, and at 172cm tall, even with the softest suspension, the footing is quite poor. Even so, it is better than pure Racer, so I have been riding G650 XCOUNTRY and Enduro race with NORMAL for about 2 years. However, it is difficult to ride on the steep terrain where you want to keep your feet on the ground. I can solve this problem by using the Lowdown Link, but I was very particular that I did not want to lower the minimum ground clearance.
I didn't want to do the bean jam removal by myself, so I was glad to have the finished product. Also, I sometimes ride Motocross course, so I wanted to keep the flat NORMAL seat for that.
And what do you think of the actual use of the product? God Seat." I tried it at Off-road Park White well. I tried it at Off-road Park White Well, and I really felt the Merit of having my feet firmly on the ground when trekking like HardEnduro. If it were not for this Seat [Color] There would have been some difficult areas that we could not Clear, and I think it would have reduced the number of falls considerably.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
Great footing, Seat hardness will be just right!
The replacement process is very easy.
If you only pay attention to the direction of installation when replacing the OEMSeat bumper, there is nothing else you can do wrong.
Also, the improvement in footing after the replacement is very good.
The back half of both feet can now be attached, which was not possible before the replacement, and it is now possible to maneuver the vehicle while riding in it.
I am satisfied with the Large as it leads to a sense of security when stopping.
Seat hardness may feel hard when riding in cold weather. But after a little while, it becomes moderately hard and can withstand a long time ride.
I think
View detail
Sponge that I want to be sober.
Improvement of Ride QualityItems
I thought about making my own, but I didn't realize that such a thing was sold.
It was installed without any modification just by sticking it on.
Rubber and Sponge are difficult to form, so it is helpful to have something like this for sale.
View detail
Fits: SUZUKI 4Cycles Birdie 50 (Four Cycles BIRDIE), SUZUKI 4Cycles Birdie 50 (Four Cycles BIRDIE), SUZUKI 4Cycles Birdie 50 (Four Cycles BIRDIE), SUZUKI 4Cycles Birdie 50 (Four Cycles BIRDIE), SUZUKI 4Cycles Birdie 50 (Four Cycles BIRDIE), SUZUKI 4Cycles Bridie 80 (for Cycle BIRDIE), SUZUKI 4Cycles Bridie 80 (for Cycle BIRDIE), SUZUKI 4Cycles Bridie 80 (for Cycle BIRDIE), SUZUKI 4Cycles Bridie 80 (for Cycle BIRDIE), SUZUKI 4Cycles Bridie 80 (for Cycle BIRDIE), SUZUKI 4Cycles Bridie 80 (for Cycle BIRDIE), SUZUKI 4Cycles Bridie 80 (for Cycle BIRDIE), SUZUKI 4Cycles Bridie 80 (for Cycle BIRDIE), SUZUKI 4Cycles Bridie 80 (for Cycle BIRDIE)
Seat cover
Size is also good and could be reupholstered. View detail
Fits: HONDA CT125CT110 HUNTER CUB
More convenient than I expected
Installation is easy. Insert the key, and the Seat automatically jumps halfway up.
That's all there is to it, but I didn't realize how comfortable it would be just to save one more hassle when refueling.
It's a great product. I mean, I want it to be Standard Equipment.
View detail
Fits: HONDA CRF1100L Africa Twin Adventure Sports ES, HONDA CRF1100L Africa Twin Adventure Sports, HONDA CRF1100L Africa Twin
Perfect
Website easy to use. High quality product, original spare part. Excelent service, realy fast and trustable. Congratulations for the team! View detail
Very Good
Unit fits well with the standard subframe and tail light / undertray. It accepts the stock rubber spacers for the underseat mounts and the little carbon brackets for the secondary mounts are very neat. It's finished like any other unpainted tail, so is ready for smoothing, primer and paint, but I'm happy with the black it was supplied with, I just polished it up a bit. It fits in with my scuffed up front fairing View detail
American's classic Cobra Seat
We replaced the OEM Seat with American's standard Cobra Seat.
The look and feel has changed considerably.
The combination of Tuck roll and Studs is the best Parenthesis.
It is much slimmer and sharper than OEMSeat.
The softness of OEMSeat is lost, but Parenthesis is superior to it.
The seating position is also more forward than OEM.
It is not possible to shift the buttocks back a little like the OEMSeat, but the buttocks are just snapped into place.
I haven't run long distances yet, but I haven't noticed any of the buttock pain that I often see in reviews of Cobra Seats.
Installation was incredibly easy and took about 10 minutes.
View detail
Fits: YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith)
Easy to install
I had been interested in these Parts for a long time, but I wish I had bought them earlier because they are easy to replace and functionally the best in terms of cost performance.
I don't ride much, but I hope that Spring won't be damaged and that it won't affect Seat and the body of the car.
View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350
Exchange from OEM
I am satisfied with the cleanliness!
I like the replacement from OEM and the various Parts that are available!
View detail
It won't be as good as you think, but it will be cool.
I bought a used DR-Z400SM seat with a low seat and a cutout, so I installed this OEM high seat.
I don't know about other Seats as I have never sat in them, but they seem a bit expensive for the effect.
When it arrived, the first thing I thought was that it was incredibly thick and the meat was quite firm to the touch.
I thought this would improve my bowels in a big way, but when I actually sat down, the flesh was surprisingly hard and I didn't feel much change.
It's probably a little better, but it's still a triangle.
It's been about 2 years since I installed it and there is no softening after sitting on it or anything like that.
Also, the raised seat raises the visibility considerably, so a lower car can see deeper into the car, [Color] If it is a van without Smoke attached, it is quite easy to use because you can see the back of the van at the window Glass waist.
However, the footing is naturally worse, and if you are not careful, you may fall down more often, so it is better to ride with care.
And most importantly, the high seat will look much better and more photogenic, just like a MOTARD.
It's not an improvement over what I expected, but it's cool, so let's call it good.
Maybe it's just the one I bought, but I had quite a bit of trouble with it even though it was OEM because the screw holes didn't line up, whether the product was out of alignment or the body was bent.
View detail
Grip force is increased and can be felt even in city driving.
[How is it used?
I bought this seat as a for re-covering because the normal seat for WR250R that I bought used was not in good condition.
The vehicle itself was also purchased used, but the Seat is a SPIRAL Complete Seat, the same as the Seat cover I purchased this time. With Stages Seat I found it difficult to use, so I bought a second-hand Normal seat.
I had already heard that someone I know uses this product and had heard reviews that the grip of the Seat Cover is good and easy to use, so I had no hesitation in purchasing it.
How did you like it?
As Mr. Manufacturer claims.
The original non-slip material is used, which is more grippy and durable than the existing Seat cover in a larger width.
Different materials are used for the top and sides of the cover, allowing for excellent machine control. As it says, it grips firmly when riding and improves the hold of the vehicle body.
My personal driving skills are low and I only play with low specifications for walking on forest roads and playing in the mountains, but the Seat's grippy feel is dependable, and I expect the Seat fabric is thicker and more durable than the OEMSeat Cover.
How did it compare to other products?
I can only make subtle comments because the only comparison is SPIRAL's with Stages Complete Seat, which was replaced in a short period of time, and the Normal Seat, which has a hardened Seat Cover. The Seat Cover itself is soft and elastic, so it is very good for a few hours of riding without getting tired. (Seat shape is NORMAL, so the surface of the buttocks will be sore after a long run.) 。
In my personal opinion. Seat CoverSingle Body price is a little high?" I think it's a good idea, but I'm not sure if this performance is enough to convince me. I think it is acceptable for this kind of performance.
[Points to note]
The seat cover itself is sewn three-dimensionally, so it is easy to put up, but the reverse side of the seat base of the WR has a rather complicated shape, so there are many parts where it is difficult to put up the tucker.
As I mentioned above, when reupholstered with STD Shape's Seat, the Siri will be sore after a long ride! (Due to the nature of OEMSeat) If you want to avoid this, you can make the seat wider or install shock-absorbing materials.
Purchasing a Complete Seat may be an effective way to do this.
Other items that would be helpful
The deciding factor in the purchase
Performance of the Seat fabric itself.
The Large was inspired by an acquaintance of mine who was using the same product.
[How is it used?
We use it for mountain play and Flat forest walks.
It is a little too heavy for me, so I don't use it for difficult Attacks, but I really enjoy Flat forest roads.
【Included Parts:presence or absence】.
SeatBody and a simplified Instruction Manual are included.
[ITEMS TO BUY TOGETHER
Tucker& needle with short legs to stop Seat if this is your first time reupholstering. (core? ball?) If you want to make it waterproof, use Vinyl sheet. (Garbage bags are also acceptable) The Coking agent may not be necessary since the sewing is done by Crimp Type.
Opinions and requests to Manufacturer.
I think it would be great if the slightly older Minor car models etc. could also be expanded into a lineup.
View detail
Change the look
The best part that change the look of bike, sporty and cafe racer style, easy install by your self. Everyone stop me in road to ask about motorcycle model and the beauty look View detail
A strong ally for those who are concerned about footing.
[How is it used?
The VSTROM1000 is not very well known in Japan, but it is popular overseas, so it is inevitably a body for a popular country (although it is also an Adventure type).
As I was born in the Showa period and do not have long typical legs, I find it quite difficult to keep my feet on the ground. Low seat. They have prepared a
'Soft front and rear suspension would make it a little easier to sink into the ride.' I had naively thought that I would be able to get a low seat for VSTROM, but I ran into a wall of reality and purchased a low seat for VSTROM using my hanghang and points I had saved up at Webike.
How was your experience with it?
"Sticky to the heel." The stability when stopping has improved dramatically as 70% of the bottom of the Riding shoes are now installed (only about 20% are installed in the standard Seat, which is a toe-up state).
When you feel a sense of security when stopping, you can relax your mind and concentrate on driving without worrying about standing in traffic jams or when driving at low speeds when you get lost, which ultimately leads to safer driving.
Prior to purchase, low Pride was in the way. Let's just try to get by with the standard Seat." I had a feeling that the low seat would be a good idea, but after the low seat was installed "The ridiculousness of increasing the RISK of a fall by being too skinny." I am keenly aware of the dangers of
How did it compare to other products?
This is a comparison with the standard Seat, but according to the Manufacturer's announcement, the seat surface will be 30mm lower.
The SIDE portion where the thighs meet the low seat has also been shaved, so you can actually feel the effect of more than 30mm when you straddle the seat.
The seat cover is the same as that of OEMSeat, so there is no improvement in texture, but there is no sense of discomfort.
[Points to note]
As mentioned above, it is the same Quality as the standard Seat. Poor installation." What a surprise!
If you are tall enough to put both feet on the ground even in the standard seat, the low seat may make you feel a little cramped around the knees (not so extreme).
Other items that would be helpful
The deciding factor in the purchase
The OEMOption is a variety of products with improved footing, the same level of quality as standard Seat, and a lower price compared to other brand products.
[How is it used?
The ease of city driving, day trips, long tours, and long-distance high-speed travel can only be achieved with a LargeEngine Displacement Volume vehicle.
【Included Parts:presence or absence】.
This is for one low seat.
VSTROM1000 does not have a Tandem belt because the Rear Carrier (with Side grip) is Standard Equipment.
[ITEMS TO BUY TOGETHER
Still, if you have a footed government proposal... Lowdown Link." Let's also consider
Opinions and requests to Manufacturer.
Strong ally of User OEMOption." Please continue the lineup as long as you can.
View detail
SEA BASS parts are cheap and helpful.
[How is it used?
I ordered a low seat for my long-time favorite DJEBEL250XC because it was available at Webike (this was around 2015).
I have a 2006 DJEBEL, so originally the tank was gun metallic and the Seat was red on the seat and black on the side, but I got a used blue metallic tank from around 2000 and the color scheme of the Seat didn't match. I got a used Blue metallic tank around 2000. Buy a SEA BASSOEMLow seat anyway." I ordered it because I thought it would be a good idea.
How was your experience with it?
When I purchased it, the color scheme Pattern was not the same as the color scheme Pattern in Webike's product introduction image, but the color scheme Pattern was like the attached image.
I don't remember how many centimeters I dropped, but just going back to this product improved the footing quite a bit because the standard Seat is thicker.
It is an OEMOption product. "luxury" It is not related to the Seat Assembly, but the quality is good, and it was an easy and gratifying Seat to purchase at a price that was less than 20,000 LARGE range in spite of the Seat Assembly's price.
SEA BASS is a manufacturer that understands the needs of the common man.
How did it compare to other products?
I can only compare with the OEM standard Seat, but I wonder if the 10mm variant has a lower seat surface?
In the standard Seat A little footing anxiety. If you are a person who has a low seat, the low seat will solve your problem! The low seat improves the footing of the driver.
For those who still feel uneasy even after changing to this Seat, I recommend changing the LINK fixing part of the Rear shock to lower the ride height.
DJEBEL250XC is an Other Brand Product Lowdown Link." Bolt fixing holes without purchasing "Low" When "high" The front fork can also be shortened in overall length without spending gold. It is a very good Motorcycle though it is not so expensive.
[Points to note]
Since it is the same Quality as the standard Seat Holt holes did not line up when installed." What a surprise!
If you are tall enough to put both feet on the ground even with the standard seat, the low seat may make you feel a little cramped around the knees (though not so extreme).
It has been quite a few years since the DJEBEL250XC was discontinued (2007), so it could be discontinued at any time.
If you are considering purchasing, make a decision as soon as possible.
Other items that would be helpful
The deciding factor in the purchase
The improved footing, the quality of being an OEM, and the low price.
[How is it used?
It can be used for various situations from city driving to long touring, and even for playing in the mountains. I find myself riding in these cars all the time." I am on it as much as I can say.
【Included Parts:presence or absence】.
This is for one low seat.
DJEBEL250XC does not have a tandem belt because the Rear Carrier (with handle) is Standard Equipment.
[ITEMS TO BUY TOGETHER
Not particularly
Opinions and requests to Manufacturer.
Please continue the Lineup until the New Model of DJEBEL250XC is introduced.
View detail
It did not suit me.
[How is it used?
It was installed from the beginning on a used WR250R that I bought about 10 years ago.
The premise is that the previous Owner had a short Rear shock ride height adjustment Quantity:I was not sure if it was the Seat or the Shock adjustment that made the footing better (there was no Normal seat when I bought the car).
The car was delivered at Motorcycle shop and on the way home. I want to replace Seat." I sold it after I got a used Normal seat.
How was your experience with it?
Seat surfaceFront is depressed like a road motorcycle, which makes it difficult for the rider to move the front and rear seating positions while driving in a seated position, making it boring to ride in an off-road type vehicle.
Since you have purchased a Dual PurPass vehicle, the front and rear Quantities:Pair (for Left and Right) I am a person who wants to enjoy weight transfer by freely changing the seating posture to Seat not needed at all." It was
I later learned that the Seat has been changed from the Sponge inside, but since I sold it after purchasing the vehicle without examining this product for the reasons mentioned above, I have no idea about the afternoon ride over long distances, etc.
I have no good or bad impression of the Seat Cover. Normal It was
If I'm honest, I'd say it's a Seat for city driving or touring out with an on road motorcycle.
How did it compare to other products?
I would compare it to the OEMSeat that replaced the remains of this Seat, but the OEMSeat was better for me.
I'm sorry that I don't quite understand the advantages of this Seat, but if the Front seat is lower than the OEMSeat... It is suitable for people who are not comfortable with the footing of a normal seat." It may be.
[Points to note]
If you try to move the seating position on the seat while driving, it is caught because the seat surface is not flat, but it is not so much that it interferes with driving, but in my case it spoils the fun of driving, so the normal seat was sufficient.
Other items that would be helpful
The deciding factor in the purchase
As mentioned above, it was already installed when the vehicle was purchased and was delivered as is.
I found out the price of the product from Webike. High! I thought.
[How is it used?
We use it for mountain play and Flat forest walks.
【Included Parts:presence or absence】.
It was attached to a used car, so I don't know much about it, but it looks like SeatBody only.
[ITEMS TO BUY TOGETHER
Not particularly
Opinions and requests to Manufacturer.
I think it is wonderful that there is a wide variety of lineups to meet various needs.
View detail
Easy to reupholster.
[How is it used?
We received an XR250 in a very dilapidated state and are in the process of restoring the functional parts and exterior.
It has been a long time since the production ended, and there were not many choices of Seat fabrics for different car models, but ALBA had a lineup for XR, which was a big help.
The purpose of use of the vehicle was unclear because it was given to me unexpectedly, but I was told that a junior friend of mine who enjoys playing in the mountains might be able to ride it, so I decided to use it for both daily riding in the city and playing in the mountains. A normal passenger vehicle." I tried to keep the following in mind.
How was your experience with it?
Even though it is a car model specific Seat Cover, is the price slightly higher than ALBA's other Seat Covers? I thought so, but there are not so many choices...
The construction was solid and we were able to finish the seat upholstery without any problems.
The thickness of the fabric seems to be as thick as OEMSeat, so durability can be expected as long as there are no protrusions or blades to cut into the fabric.
Perhaps because the fabric is too new, the surface was slippery during the test ride after the work was completed, but we believe it will settle down as we ride it.
How did it compare to other products?
Nothing of note, good or bad. OEMSeat Cover parallel." It's like
I have no complaints as this is exactly what we were aiming for with this Seat reupholstery job.
[Points to note]
This is an easy task compared to Universal Product's Seat upholstery since the product is three-dimensionally sewn for the car model. In fact, it may be more troublesome to remove the old Seat Cover.
As a personal tensioning method, I first fasten the front and back of the Seat with Tucker, loosening the tension a bit.:Pair (for Left and Right) Quantity at the time of the stakeout of the:Pair (for Left and Right) The tip of the sponge should be stretched evenly so that there are no gaps in the sponge, and the tip of the sponge should be stretched along the seat sponge without wrinkles to obtain a satisfactory result.
Other items that would be helpful
The deciding factor in the purchase
As inexpensive as possible. It just feels normal." We chose the Seat Cover of
It is also important to be able to use the points you have accumulated at Webike.
[How is it used?
We consider that it can be used without any problem from playing in the mountains with friends to day-touring.
【Included Parts:presence or absence】.
A piece of skin for SeatBody, a tandem belt, and an instruction manual with simple tensioning instructions are included in the quantity.:Set
In this case, the Rear Carrier has a handle, so the Tandem belt is not attached.
[ITEMS TO BUY TOGETHER
Tucker (Stapler's slightly larger size) to hold the Seat fabric in place on the Reverse side of the Seat Base, and a shorter core for the legs (because the longer legs would poke through to the surface at the SIDE of the thin Sponge).
If you want to emphasize waterproof performance, you may want to cover the area between the SeatMaterial and the outer skin with Vinyl before applying it. If you do not want the skin to gap while running, it may be better to apply directly to the sponge without using Vinyl, and you should prepare a SiliconCoking agent to apply to the reverse side seam of the SeatMaterial.
Opinions and requests to Manufacturer.
If possible, several color variations would make it easier to match the car body color.
We would appreciate just having a set up for each car model, so please continue to sell as much as possible.
View detail
Fits: HONDA CT125CT110 HUNTER CUB
A satisfying, if pricey, product.
Installation is easy and very effective.
It is very useful when using the Helmet holder and when refueling.
It's not cosmetically expensive, but it's one of my top 3 custom parts!
View detail