Reviews
Quintessential OVER products
The OVER products are pricey, but the results are outstanding. View detail
Fits: HONDA MONKEY, HONDA GORILLA
Highly satisfactory!
From a certain company's thin Swing Arm until now.
Changed to GCraft.
First of all, it looks good!
The high price of this product is enough to give you a sense of ownership and satisfaction.
The installation requires a certain amount of skill since it is an undercarriage.
However, Special Tool is not required.
You can ride it, look at it, polish it, w
View detail
Fits: HONDA GORILLA, HONDA MONKEY
Now you can drink.
Anyway, Cool.
You can polish Motorcycle, look at it and have a drink.
The installation is routinely MONKEYRose and
Level is normal if you are a person who is doing Level.
Special Tool is also not required.
Well, I am satisfied visually.
View detail
That's what I'm talking about. Over??
For some reason, the Instruction Manual was included for ZEPHYR, but ….
The quintessential Over production is impressive. ??
View detail
สวิงอาร์มหลัง over racing ชิ้นงานสวยงามตามยี่ห้อ มองดูแน่หนาดีตัวดามล่าง View detail
Type10
Polish is beautiful and looks completely different and I am satisfied.
Installation was easy and quick.
I haven't ridden it yet and am looking forward to Touring.
View detail
Cool
Installation is not very difficult.
It can be hard to effectively be different here.
The product is finished with the highest precision and looks the coolest anyway.
View detail
GCraft Swing Arm Triple Square
As long as you have a Jack, you can easily replace it.
It has not been driven yet, so the effect is unknown.
I think we were able to reduce weight from OEM.
I hope it will last for a long time.
View detail
The best!
I really wanted to install a 5 cm long swing arm, but the small size was too small for me, so I decided to use the standard size.
The ride feels good.
In terms of work, I was able to install it even as a novice.
View detail
Quality welds
This swingarm looks great on my monkey. Has roller pivot bearings unlike the oem swingarm are bushings. It also compliments the rear suspension for a smoother ride. Although this is designed for the 5.5j wheel you can also go down to a 3.5j wheel with the correct axle shaft spacers. View detail
Fits: HONDA MONKEY, HONDA GORILLA
A little modification is required, but it can be installed.
It was cooler to make it just a little bit Long. Installation was done normally by shaving a little bit off the boss that goes into the Brake Panel groove. View detail
สวิงอาร์มตัวนี้ชอบมาจากที่เคยลองใส่ของ takegawa เปลี่ยนใจมาลอง g craft สวยชอบมากเลยครับ กล่องใหญ่ เป็นลูกปืนด้วยตัวใส่แกนสวิงอาร์ม โอเคเลย View detail
Not bad!
Not bad construction!
Does it look good?
I'm worried about it cracking.
View detail
lightweight swingarm
My motorcycle is KAWASAKI NINJA400, the appearance of this car is very cool, but the black iron rear rocker arm looks very cheap from the rear, so I bought this OVER RACING TYPE7 rear rocker arm on webike, it uses Made of 7N01 aluminum alloy, it weighs only 3.8KG and is very light. The length and width maintain the original factory configuration. On the premise of not affecting the basic balance of the car body, the suspension system is strengthened. -------------------------------------------------- -------- My motorcycle is Kawasaki Ninja400. The appearance of this bike is cool, but it looks cheap from the back of the black iron back rocker, so I bought this Over Racing Type7 on the webike. 7N01 aluminum alloy production, weighing only 3.8kg is very light, the length and width maintain the original configuration, and the suspension system is strengthened without affecting the balance of the basic bike body. Powered by Google Translator View detail
G craft swingarm, 2023 grom
I was very pleased with the items and service from webike. The swingarm was perfect and exactly what I was expecting, fits perfectly and looks great. The shipping was fast to USA and customer service was excellent. Will definitely be ordering from these guys again very soon. View detail
Fits: HONDA GROM, HONDA GROM, HONDA GROM
Installed on a JC75 Grom. Excellent finish.
We have finally replaced the Aluminum Swingarm that we have wanted for a long time.
Since there are almost two choices of external Swing Arm for Grom, GCraft or Over, I had a lot of trouble deciding which to choose.
The length of the swing arm also varies widely, so it may depend on what you are looking for in a grom.
I like the Quick turning ability with the ShortWheelbase, so I chose the STD with the same dimensions as the OEM.
I chose Stubby based on looks alone, and if Parenthesis is good, it's good enough.
Over made has Bearing on Pivot as standard, but GCraft is an Option.
This is one of the reasons why we chose Over.
Impressions after the replacement, the Rear ride height was slightly increased.
Since the rear suspension has not been adjusted in any way, the base of the rear suspension seems to have moved slightly forward.
I think you will get used to this area as you ride.
The movement of the Swing Arm is unmatched by the OEM, and the OHLINS suspension is finally performing as it should.
Flexibly absorbs the Gap of the road surface.
Oh no - if this was the case, I should have replaced it earlier.
Custom parts are quickly discontinued if they are out of season, so if you are considering them, please contact us for a recommendation.
View detail
LargeChange good. It is indeed an OVER product.
Mounted on ZrX1200 DAEGFinal edition
After installation, I have only done city driving, but the handlebar cutout during cornering has been eliminated and I can turn easily. Also, the quantity:Pair (for Left and Right) is the Quantity of Rear tire:Pair (for Left and Right) Small students are running in Kirigamine (Suwa, Nagano) as a teri-birdie, but the mountain pass will be closed soon. We are looking forward to next spring's Challenge.
As for the Engine side Sprocket, as expected, it was impossible to loosen it after trying various methods, as it has been heavily criticized on Netetc. By the way, it is impossible to extend the wrench by about 1.5Meter with a single pipe, or to use an impact wrench with the Torque of replacing the tire of a car. After trying many things, we decided to use Makita's Impact wrench. TW001GRDX I bought a new one and loosened it in one shot. This Impact wrench has the largest loosening torque of 2,050N. In other words, it will not loosen unless you use the Impact wrench that has the Torque for Large type Trucks.
View detail
Invincible OVER rocker arm
It has been almost 2 years since I bought it and installed it. I have no time to write a review. Now I will talk about the feeling of this rocker arm. The first time I held it in my hand, it directly dazzled my eyes. This craftsmanship, this polishing, is worthy of a big factory. The B grid is straight to the top. As for the price, I personally feel that it is acceptable. After all, motorcycle modification parts have a brand premium. It depends on how you understand it. For other detailed usage experience, you can go to station B to watch the unboxing video of my rocker arm. The video is very detailed! Invincible OVER! -------------------------------------------------- -------- I have been buying a car for almost 2 years, and I have no time to write a comment. Now I talk about the feeling of this rocker. The first time I took it in my hand and shook my eyes directly. This craft, this polishing is indeed a big factory, the B grid, directly to the top. As for the price, I personally feel acceptable. After all, motorcycle changes have brand premiums. Seeing how you understand, other detailed experiences can go to station B to see the box opening video of my rocker arm. The video is introduced in detail! Invincible over! Powered by Google Translator View detail
Fits: HONDA MONKEY, HONDA GORILLA
Do not break the NORMAL Style
I had Bore up to 88cc and wanted to do something about the Front floating when starting off, so I decided to go with Ronsui.
I like the NORMAL Style, so I was looking for a RONSUI that wouldn't break that style, and this was it.
The front of the car does not float anymore.
View detail
Exactly in Normal style!
I didn't want to ruin the normal look, so I decided to make it 3cm long, which makes the gap between the Rear Fender and the Tire even, and I love the overall balance when viewed from the side.
As you said, the Chain Adjuster is very difficult to work with. Also, I ordered the Normal chainCover Option, but there is no gap between the 2.75JWheel and the 3JWheel, so I think it is impossible to install the Normal chainCover on a 3J or larger wheel. 。 Rear shock is 265mm OEM length and front/rear balance is fine.
View detail