Please login to check coupons
Product Detail
Specification
for Twin Shockfor STD Wheel
Swingarm Pipe Shape: Triple Square
Stabilizer: O
Material: Aluminum 7N01
Description
The STD width of the swingarm for the MONKEY(for the MONKEYhub) is a swingarm made with the MONKEYOEM swingarm.
It can use the MONKEYOEM hub as it is, G-CRAFT Parts Number: It can use 39053 rear disk hub.
It is a swingarm which corresponds to both drum and disk.
It is rich in length choice and is the most popular swingarm of G-CRAFT.
It is a pipe that boasts more than 80% of support to the user who selects 16cm or more, especially for the swingarm of the triple square pipe which adopted "strength cross section" of the eye.
•It is an optional description
[Swingarm Finishing]
Black with anodized finishing (G-CRAFT Parts Number: 60198) + 25000 yen
Seracoat Finishing (G-CRAFT Parts Number: 60807) + 30000 yen
[What is Seracoat?]
Seracoat is a paint by NIC, which is currently used in US military forces, special paint finish, cold paint.
It is inspected so as to be able to cope with harsh conditions, and it is a paint produced and produced for performance emphasis such as heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, thermal insulation etc.
It is improving the strength of the coating by grinding the ceramic with a special machine and mixing it into the paint. Because of that, it becomes a matte surface, but the coating can be made very thin (25 microns)
It is possible to leave weld marks (beads) without hiding.
Adhesiveness is the highest value among coating materials, it is impossible to wrinkle even when folded, paint is difficult to peel off even for stepping stones, so it is suitable for frame and swingarm surface treatment.
*It usually takes about 3-5 weeks for delivery.
[Optional 1] Chain slider bolt fixing specification (G-CRAFT Parts Number: 60228) +1000 yen
It changes the chain slider from riveting to bolting. It can be easily exchanged in case of wear.
[Optional 2] Stand hook base (M6) Additional processing (G-CRAFT Parts Number: 60903) + 3000 yen
It is possible to install G-CRAFT stand hook or an external made stand hook (M6).
[Optional 3] Chaining Optional
Racing stand hook specification (G-CRAFT Parts Number: 60186) + 3000 yen
It makes the chain hook rear part of the conventional chain hook specification. G-CRAFT Parts Number: It can mount 32071, 32072, 32073 racing stand hooks.
*It is 33170 AP Lockheed caliper support installation unavailable (It interferes)
Back pull type (G-CRAFT Parts Number: 60221) + 3000 yen
It is a rear pull adjuster designed to eliminate the troublesome maintenance of the chain adjustment.
It is easy to adjust the adjustment part which was difficult to turn due to tool interference and others as the adjustment nut comes at the end of the swingarm.
*It can not be installed at the same time as the racing stand hook specification, OW type
OW type (G-CRAFT Parts Number: 60014) + 3000 yen
It eliminated the vertical displacement of the axle shaft by tapering the chain drawing part.
It has no up and down displacement because it moves the tapered frame. It is a mechanism adapted also for the swingarm of a big bike.
OW type racing stand hook specification (G-CRAFT Parts Number: 60188) + 5000 yen
It changes OW type chain pulling rear part to stand hook specification.
G-CRAFT Parts Number: It can mount 32070/32072 racing stand hooks.
*It is 33170 AP Lockheed caliper support installation unavailable (It interferes)
Eccentric Type (G-CRAFT Parts Number: 60059) + 5000 yen
It is an eccentric type chain drawing often seen in Kawasaki made motorcycle.
*It can only use the type of caliper support with the caliper attached to the lower part of the swingarm when used for disk specifications.
*The swingarm for wide wheels is possible to use with disc specifications.
Note
Click here for other G-Craft Monkey Twin Shock Swingarms.
Here are other swing arms for G-Craft Monkey Monoshock.
Click here for other G-Craft Monkey truss swing arms.
Click here for Other G-Craft Monkey Normal Look Swingarm.
Click here for Other G-Craft Monkey R Wheel Mount Twin Shock Swingarm.
For other G-Craft Standard Wheels Twin Shock Swingarm is here.
Click here for other G-Craft NSR wheel mounted twin shock swing arms.
Click here for other G-Craft Twin Shock Swingarm for Super Wide Wheels.
For other G-Craft Wide Wheel Twin Shock Swingarm is here.
* The image is only for reference. The image shown may differ from the actual product.
Caution
*8 inch up to 4.0J (disc up to 3.5J), 10 inch up to 4.0J can be installed (10 inch needs more than +4cm)*Only triple square pipe, chain slider is also attached at the bottom.
*The Type 2 with Standard Stabilizer has a 42mm x 32mm main pipe.(Normal standard stubby is 32mm x 32mm thin pipe)
*The rear shock is attached in the shape of "C", but there is no problem in use.
*The length of the brake stopper must be 25mm from the tip of the disc.
*Image 3 is optional: This is an image of the chain slider bolt fixing.
*Image 4 is optional: The image above shows Stand Hook Base (M6).
*Image 5 is an image of the chain pull option.
(1) Chain adjuster: Back pull type
(2) Chain adjuster: Standard (Racing stand hook specification)
(3) Chain adjuster: OW type (Racing stand hook specification)
(4) Eccentric type
