Reviews
Fits: HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA Monkey Baja, HONDA MONKEY RT, HONDA MONKEY R, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MOTRA, HONDA MAGNA50, HONDA MAGNA50, HONDA CL50, HONDA BENLY50CD50, HONDA BENLY50CB90, HONDA BENLY90 S, HONDA BENLY50S, HONDA CUB PRESS, HONDA CUB PRESS, HONDA CUB PRESS
Since the Gasket tattered on the occasion of Muffler exchange, it exchanged. Although it is not a thing exchanged at the beginning of , since it is entering two sheet at this price, there is a profitable feeling.
Since the Gasket tattered on the occasion of Muffler exchange, it exchanged.
Although it is not a thing exchanged at the beginning of
, since it is entering two sheet at this price, there is a
profitable feeling.
View detail
Fits: KAWASAKI VULCAN400, KAWASAKI ZZR1200, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZX-9R, KAWASAKI ZX-12R, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI Z750 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI W800, KAWASAKI W650, KAWASAKI W400, KAWASAKI KLE400, KAWASAKI GPz1100, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ1000RX
With it being fundamental, although it may be the parts which are not seen, I usually think that there is also no exhaust leakage and it is OK if uniformly crushed like used [ of a photograph ]. When the Muffler is removed, I would like to excha
With it being fundamental, although it may be the parts which are not seen, I usually think that there is also no exhaust leakage and it is OK if uniformly crushed like used [ of a photograph ].
When the
Muffler is removed, I would like to exchange for a new article, without sparing, since I think that especially the Gasket of KITACO is carried out completely and is thick.
When just fine parts are exchanged for a new article, it is GOOD also at a feeling + machine target.
I would like to have it ready as one of the consumable goods from now on.
View detail
Fits: YAMAHA MATE80, YAMAHA MATE80, YAMAHA MATE50, YAMAHA MATE50, YAMAHA MATE50, YAMAHA MAJESTY250(SG03J), YAMAHA MAJESTY250(SG03J), YAMAHA MAJESTY250(SG03J), YAMAHA MAJESTY250(SG03J), YAMAHA MAJESTY250(4HC), YAMAHA MAJESTY250(4HC), YAMAHA MAJESTY250(4HC), YAMAHA MAJESTY250(4HC), YAMAHA POCKE, YAMAHA Bobby, YAMAHA CHAPPY, YAMAHA YSR80, YAMAHA YSR50, YAMAHA YB-1, YAMAHA TZR50
[webike Monitor] Goods Delivered are having structure equivalent to the removed original manufacturer's product. It is completion, when it inserts between a Cylinder and an Exhaust, a ring is fastened and it is crowded. Although exhaust leakage was
[webike Monitor] Goods
Delivered are having structure equivalent to the removed original manufacturer's product.
It is completion, when it inserts between a Cylinder and an Exhaust, a ring is fastened and it is crowded.
Although exhaust leakage was started from the 3000 rotation grade until now and noise was scattered and disarranged, it came to do original work of the Muffler.
Although pure parts still came out and it was the same amount mostly also in amount of money, the goods of kitaco were used this time.
An Impression can also be written.
View detail
Fits: HONDA CB400FOUR (water-cooled), YAMAHA XJR400R, HONDA CB400SF, KAWASAKI ELIMINATOR 250, KAWASAKI GPz400F/F2, KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZR-7/S, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GSX250S KATANA, SUZUKI GSX400S KATANA, SUZUKI GSX400, SUZUKI GSX400, YAMAHA XJR400R, YAMAHA XJR400, HONDA CBX400F, HONDA CBR400F, HONDA CBR250R
Although the goods of a certain auction were used before, after sticking and fixing to attachment with the liquid Gasket smaller than a port attachment, when it did not come out, the Gap had happened. Although the goods here were found and purchased
Although the goods of a certain auction were used before, after sticking and fixing to attachment with the liquid Gasket smaller than a port attachment, when it did not come out, the Gap had happened.
Although the goods here were found and purchased, it has attached with the Beauty by loan attachment with the liquid Gasket so that a size might also be large and it might not fall at the time of attachment.
Of course, there is also no exhaust leakage.
He is indebted to the goods here from now on.
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 100 TypeD, HONDA APE 100, HONDA APE TypeD, HONDA XR80, HONDA XR50 MOTARD, HONDA XR250MOTARD, HONDA XR250 BAJA, HONDA XR250, HONDA XR250, HONDA XR100MOTARD, HONDA XR100R (for competition), HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XE75, HONDA XE50, HONDA NSF100
Probably, a new article will be good, if it is this price since it is the necessaries at the time of Muffler exchange and does not exchange frequently.
Probably, a new article will be good, if it is this price since it is the necessaries at the time of Muffler exchange and does not exchange frequently. View detail
Fits: HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA Monkey Baja, HONDA MONKEY RT, HONDA MONKEY R, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MOTRA, HONDA MAGNA50, HONDA MAGNA50, HONDA CL50, HONDA BENLY50CD50, HONDA BENLY50CB90, HONDA BENLY90 S, HONDA BENLY50S, HONDA CUB PRESS, HONDA CUB PRESS, HONDA CUB PRESS
Although it considered and depended and was thin, it is safe at strong structure. Since it is entering two piece, it is profitable.
Although it considered and depended and was thin, it is safe at strong structure.
Since it is entering
two piece, it is profitable.
View detail
Fits: KAWASAKI ZXR250, KAWASAKI KLX125, KAWASAKI D Tracker 125, KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI ELIMINATOR 250V, KAWASAKI ZXR250R
Although he thought that he would reuse the Gasket attached from the first, since the price was also cheap, it purchased.
Although he thought that he would reuse the Gasket attached from the first, since the price was also cheap, it purchased. View detail
Fits: HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA Monkey Baja, HONDA MONKEY RT, HONDA MONKEY R, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MOTRA, HONDA MAGNA50, HONDA MAGNA50, HONDA CL50, HONDA BENLY50CD50, HONDA BENLY50CB90, HONDA BENLY90 S, HONDA BENLY50S, HONDA CUB PRESS, HONDA CUB PRESS, HONDA CUB PRESS
They are parts certainly required for Muffler exchange. Since it is a portion in connection with safety although it is consumable goods, it is cheap, but the thing made from a KITACO which has high reliability is used. If it equips exactly also abou
They are parts certainly required for Muffler exchange.
Since it is a portion in connection with safety although it is
consumable goods, it is cheap, but the thing made from a KITACO which has high reliability is used.
If it equips exactly also about a using feeling, a problem like exhaust leakage will not arise at all, either.
Although it is better if it can do and can purchase not with a two-piece Set but with a Rose since one piece is enough in the case of
, however a CUB ...
View detail
Fits: HONDA CRM50, HONDA NS-1, HONDA NS50F, HONDA NSR50, HONDA CRM50, HONDA NS-1, HONDA NS50F, HONDA NSR50
It purchased in order to change into the Jumper of an external article from a pure Chamber. Especially structure is not necessarily coarse, and since it has done firmly and the original manufacturer's product is Excelled in the Cost performance
It purchased in order to change into the Jumper of an external article from a pure Chamber.
Especially structure is not necessarily coarse, and since it has done firmly and the original manufacturer's product is
Excelled in the Cost performance, or is seemed enough with this product.
Although the
Gasket of this Manufacturer was used, Kon's structure is coarse, and when Chamber exchange of various Motorcycles has been carried out until now [
] also, since it was not once and can use in comfort, we recommend you fault of not having gone into an Exhaust-pipe portion!!
View detail
Fits: HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R
They are a Silencer and a Gasket of the Leather-suit portion of a main part. Not too bad. It is not a Cylinder side.
They are a Silencer and a Gasket of the Leather-suit portion of a main part.
Not too bad.
It is not a Cylinder side.
View detail
Fits: SUZUKI SKYWAVE650 burgman, SUZUKI GLADIUS650650, SUZUKI GLADIUS650400, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI WOLF250, SUZUKI WOLF200, SUZUKI WOLF125, SUZUKI DL1000 V-STROM650XT, SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM650, SUZUKI TS200R, SUZUKI TS125R, SUZUKI SV650S, SUZUKI SV650, SUZUKI SV400, SUZUKI SV400, SUZUKI ST250 E Type
When exchanging Mufflers, since the worries of the direction used as a new Gasket about exhaust leakage decrease rather than attaching an old Gasket, I think that it is good.
When exchanging Mufflers, since the worries of the direction used as a new Gasket about exhaust leakage decrease rather than attaching an old Gasket, I think that it is good. View detail
Fits: HONDA CBR500R, HONDA CB500X, HONDA CB500F, HONDA MAGNA750, HONDA MAGNA750, HONDA HORNET600S, HONDA HORNET600, HONDA BROS650, HONDA BROS400, HONDA FORZA(MF10), HONDA FORZA Z, HONDA FORZA Si, HONDA XELVIS, HONDA FAZE, HONDA STEED600, HONDA STEED400 VSE, HONDA STEED400, HONDA STEED400, HONDA STEED400, HONDA Silver wing600
When exchanging Mufflers, the direction used as a new Gasket considers that you do not need to be troubled by later by it rather than attaching the old Gasket currently attached from the first too. The price of the Gasket of this Manufacturer is als
When exchanging Mufflers, the direction used as a new Gasket considers that you do not need to be troubled by later by it rather than attaching the old Gasket currently attached from the first too.
The price of the Gasket of this Manufacturer is also conscientious, and since two are contained, when two Mufflers change, it is found useful.
View detail
Fits: HONDA BENLY50 PRO, HONDA BENLY50, HONDA Byte, HONDA TODAY, HONDA TODAY, HONDA DIO(4Cycle), HONDA DIO(4Cycle), HONDA DIO(4Cycle), HONDA ZOOMER, HONDA ZOOMER, HONDA SMART DIO, HONDA SMART DIO, HONDA GYRO CANOPY, HONDA GYROX, HONDA CREA SCOOPY, HONDA CREA SCOOPY, HONDA CREA SCOOPY
The Gasket which was being reused by Muffler exchange became useless, and since it was exhaust leakage, it purchased. I think that I will exchange at the time of a replacement since a price is also cheap. Reuse is useless.
The Gasket which was being reused by Muffler exchange became useless, and since it was exhaust leakage, it purchased. I think that I will exchange at the time of a replacement since a price is also cheap. Reuse is useless. View detail
Fits: SUZUKI LOVE, SUZUKI minicross, SUZUKI Hi., SUZUKI khana, SUZUKI Verde., SUZUKI zzz, SUZUKI bean-curd, SUZUKI GS250FW, SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI street magic, SUZUKI TS50 Hustler, SUZUKI RG50, SUZUKI GN50E
[Webike Monitor] There was also no exhaust leakage and it was satisfactory. It is recommended.
[Webike Monitor] There was also no
exhaust leakage and it was satisfactory.
It is recommended.
View detail
Fits: HONDA CRM50, HONDA NS-1, HONDA NS50F, HONDA NSR50, HONDA CRM50, HONDA NS-1, HONDA NS50F, HONDA NSR50
it is not especially rude structure, either -- since it comes out and is sushi and an each subdivision -- -- it is easy-to-use.
it is not especially rude structure, either -- since it comes out and is sushi and an each subdivision --
-- it is easy-to-use.
View detail
Fits: YAMAHA BOXN, YAMAHA VINO(2Cycle), YAMAHA TRY, YAMAHA CHAMP, YAMAHA CHAMP, YAMAHA CHAMP, YAMAHA SUPER JOG ZR, YAMAHA SUPER JOGZ, YAMAHA jogger, YAMAHA JOG90, YAMAHA JOG 80, YAMAHA GRAND AXIS, YAMAHA GEAR, YAMAHA GEAR, YAMAHA GEAR, YAMAHA Excel, YAMAHA APRIO, YAMAHA AXIS 90, YAMAHA AXIS 90, YAMAHA AXIS 50
A Muffler gasket is purchased for a sense, although had and cooked in reserve. Or [ that it is good also for amount-of-money doubling to the mailing cost no charge something ].
A Muffler gasket is purchased for a sense, although had and cooked in reserve.
Or [ that it is good also for amount-of-money doubling to the
mailing cost no charge something ].
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900), KAWASAKI Z900 (KZ900), KAWASAKI Z750FX, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1000 MkII, KAWASAKI Z1000, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1 (900SUPER4), KAWASAKI Z900 (KZ900), KAWASAKI Z750FX, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1000 MkII, KAWASAKI Z1000, KAWASAKI Z1-R/Z1-RII
Since a Muffler becomes obstructive at the time of Oil-Element exchange, you have to remove one by one. Since this Gasket was a thing it is better to exchange whenever it originally removes a Muffler, it was more mostly purchased including the Stock
Since a Muffler becomes obstructive at the time of Oil-Element exchange, you have to remove one by one.
Since this Gasket was a thing it is better to exchange whenever it originally removes a Muffler, it was more mostly purchased including the Stock.
Since the
original manufacturer's product is expensive, this product is found useful.
View detail
Fits: SUZUKI SKYWAVE650 burgman, SUZUKI GLADIUS650650, SUZUKI GLADIUS650400, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI WOLF250, SUZUKI WOLF200, SUZUKI WOLF125, SUZUKI DL1000 V-STROM650XT, SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM650, SUZUKI TS200R, SUZUKI TS125R, SUZUKI SV650S, SUZUKI SV650, SUZUKI SV400, SUZUKI SV400, SUZUKI ST250 E Type
It purchases for exchange with a SKYWAVE650 burgman external Muffler! The Muffler gasket is always using KITACO products. At the time of * Muffler exchange, it is a fear ant of exhaust leakage! A Gasket is a new article...
It purchases for exchange with a SKYWAVE650 burgman external Muffler! The
Muffler gasket is always using KITACO products.
At the time of
* Muffler exchange, it is a fear ant of exhaust leakage! A Gasket is a new article...
View detail
Fits: HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA Monkey Baja, HONDA MONKEY RT, HONDA MONKEY R, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MOTRA, HONDA MAGNA50, HONDA MAGNA50, HONDA CL50, HONDA BENLY50CD50, HONDA BENLY50CB90, HONDA BENLY90 S, HONDA BENLY50S, HONDA CUB PRESS, HONDA CUB PRESS, HONDA CUB PRESS
Since the Head currently used called it the KITACO, it decided to use the Gasket of a KITACO. It has equipped without the Gasket's having fallen and being irritated, since the Size was also inserted in exactly well.
Since the Head currently used called it the KITACO, it decided to use the Gasket of a KITACO.
It has equipped without the Gasket's having fallen and being irritated, since the
Size was also inserted in exactly well.
View detail
Fits: HONDA LEAD125, HONDA LEAD 100, HONDA TLM220R, HONDA TLM50, HONDA TLM200, HONDA NSR50, HONDA NS50F, HONDA NS125R, HONDA NS-1, HONDA MTX50/R, HONDA MBX50, HONDA MB50, HONDA CRM50
That too cheap carries out the Recommendation of the thing thing which has calm and high reliability which starts exhaust leakage.
That too cheap carries out the Recommendation of the thing thing which has calm and high
reliability which starts exhaust leakage.
View detail