Reviews
Not Standard Size
25.2mm, so it will be sandwiched between the rubber plates.
However, Rubber sticks out, does not pinch properly, etc. Stress builds up subtly.
In the end, I managed to attach it, but I was not satisfied with the wobble, the subtle texture, and the fact that it was rather large for a skimmer Switch.
I think it would be better to use a 22mm size made by NAKA0 with waterproof and wiring processing...
Well, it's too much trouble to replace it, so I'll use it until it breaks.
View detail
Too much priority is given to designability, and it is hard to figure out lol.
Used as an OnOff switch for the headlight. (Headlight should always be on on public roads.)
I like it because it is quite a stylish design, but it is hard to see the Switch at night. ON] "OFF"
Since there is no notation I don't remember Switch being in there right now!" Stress was removed after a moment of worrying about it.
ON] [OFF] The safe Switch listed is easy to understand and recommend!
View detail
Slim Switch
The width of the Switch is Slim, so there is no need to worry about the mounting location.
However, the height is rather high, so there is a sense of volume.
The feel is good, and the on/off drumstick is quick and easy.
Waterproof treatment is required around the wiring drawer on the reverse side.
View detail
The Switch is highly textured, but...
I was asked to install this switch on a vehicle owned by an acquaintance and used it as a hazard switch.
The width of the SwitchBody is about 13mm, which is very slim, and I think it's a great product for vehicles with tight installation spaces. I did the installation myself, so I'll list the good and bad points below, including the work involved.
It was good point
It is very slim, so there are few restrictions on installation space.
The part where the wiring comes out of the switch is also nicely designed, including the clamp part of the switch, so it looks very good.
The Seesaw part of the Switch is large and easy to operate. I felt it was easy to operate even when I was wearing thick Winter Gloves.
The Switch has a moderate sense of moderation and a good sense of control.
Points that were not so good
The Handlebar is compatible with both 22.2mm and 25.4mm bars, so if you are using it on a 22.2mm bar vehicle, you will need to insert the rubber plate that comes with the clamp to adjust the size. However, the rubber plate reduces the quality of the appearance, and the squishy feeling of the rubber plate is felt in the operability.
General review
I think it's a great product because it's one of the few universal switches that is so thin and has a texture that can be used for a wide range of products from miniclass to large. I think it's difficult to divide the product by Handlebar diameter, but I think the Handlebar diameter used is overwhelmingly 22.2mm, so there is room for improvement in this area, such as the materials used for size adjustment.
As an end user, I think that if you use the 22.2mm Handlebar, you will be very satisfied with the results if you use a harder material to adjust the Size.
View detail
The thinness of the product makes it less distressing for Quantity:Set
Blinker relay with Hazard Function by the same Daytona I bought it for Hazard's Switch because I replaced it with the Type of
I installed a thin USBHolder from the same Daytona last year, so I had to worry about it We were able to install it without any problems
Initially, the switch box and the Clutch lever on the LeftHandlebar between the Handlebar and the Holder, but I don't want to let go of the Handlebar to operate it while it's running So I finally relocated it between the Switch box and Grip
It feels like a Snap and could be a bit lighter in use I am generally satisfied with the service
The price point is more expensive if you look at Amazon and other Chinese products, but I don't want it to be fragile either and I don't want to spoil the operability around the Handlebar, so I think it's an acceptable price (^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Personally, I ride a motorcycle called Buell, which is a domestic There are few opportunities to use Universal Products, so we use parts from Japan I'm happy to be able to do this
View detail
Used for retrofit hazard lamp switches
Set up on the Left end of the Handlebar, no problem operating it!
I drove it once in the rain and it looks fine
It's a cohesive Switch that doesn't take up a lot of space
It is used for W650
View detail
Refreshing installation around the Handlebar
With the addition of Hazard to the 250TR, I bought a Chinese Universal Switch, but The Clutch lever can be piped when it is installed next to the wide Silencer Switch I bought this product with a narrower width because it hangs over the bend in the Handlebar
The installation itself can be pimped out, but Ky's added the following modifications
Additional processing
Cut the width of the attached RubberSpacer to be flush with the Switch
→ to narrow down the width of the game as much as possible
・WiringQuantity:2pc to 1pc with Harness tube
(https://www.webike.net/sd/23394541/)
→Body to Quantity:There's a 2pc Cable out there, but it's cluttered and
It doesn't look good, and also because it looks like it might get caught when you pull it around
The price is a bit high, but I'm satisfied with the appearance (after additional processing) and ease of installation
View detail
Quantity : 2pc. Purchase Set eyes
When purchasing your own Hazard in CBR 250R, purchased as an active switch and purchased Grom this time,
I installed my own Hazard on Grom and purchased it as its working Switch.
Slim Body is easy to install with no choice of installation location.
However, as I felt last time, when I installed the Switch, I wanted to pinch the Rubber sheet in the Handlebar, making it difficult to pinch it,
It is more convenient to work in this part if you make it Round shape.
I feel that the price is a little expensive ? ? ?
View detail
Slender Switch
This Daytona Slender Switch is very useful and have a lot of type you can choose and can use with another switch. Black colour is very beautiful. View detail
This Design feeling look great!!! And the button see-saw type feel very comfortable to use... It suits my motorcycle...
This Design feeling look great!!! And the button see-saw type feel very comfortable to use... It suits my motorcycle... View detail
Daytona headlight on-off switch, very beautiful, strong, durable, easy to install because there are accessories included. And the price is not expensive compared to the quality received Switch off headlights Daytona beautiful, durable, easy to install bec
Daytona headlight on-off switch, very beautiful, strong, durable, easy to install because there are accessories included. And the price is not expensive compared to the quality received Switch off headlights Daytona beautiful, durable, easy to install because it has to be ready. And the price is not so dense as compared to the quality you get.(Google Translation) View detail
Slightly delicate for the price
I felt it at the time of assembly, but Clamp is somewhat weak.
I stopped with Screw but the feeling of distortion when I closed it was somewhat cheap and the impression was not good.
However, once installed, there is no turning or gapping, and operability is long, but it is good.
Therefore, although there is no problem, there was a sense of uneasiness a bit, please be careful as I think that it will break if you tighten with Overtorque.
Universal Product and Functionally Simple ON / I think that it will be a little cheaper because it is OFF.
View detail
Can somehow be installed
Purchase to reduce Battery load at startup.
Since Headlight is lit by IgnitionON, Battery in the same way as PCX can ride only occasionally as long as it is pure. Is somewhat improved by this product?
Place attached
Right Handlebar interferes with OEM FBrake and installs no space
LeftHandlebar can switchably install Wiring with SwitchUp between SWBox and Clutch lever.
It was good that Limit could be installed with this product.
Where to become anxious
Sorry Plating. As well as OEM, it was good to have a casual feeling like White Marking with Red's Switch or Black or Lineup with a choice.
View detail
With less Space!
I want a Switch for Assis Trump and I purchase it.
Handlebar Because the width is narrow, with the Brace bar, Knuckle guard attached, it is impossible to secure installation space, so the price is a little expensive, but buying a thin type here.
Mad Body and Plating Button, I like it without a touch feeling.
View detail
Purchase for PowerPiece V MAP switching
I bought it for MAP switching of Power commander V.
(Because the wire is thick, you need to stick the thin wire to Wiring of this product. )
I think there are pros and cons for appearance, I think that it would be good if this price looks a bit better.
It is a bit disappointing because Plastic's Plating of Switch part looks cheap by all means.
For anything more (Plating or something elated) If you make the price cheap and make it with Plastic like OEM Product's Switch, I think that it will make sense of unity.
Also, regarding the Waterproof performance of Switch part, "Large durable if it is rainy" It is like feeling..
* Absolutely do not apply high pressure washer and water of Hose to Switch part.
(We are Short because Waterproof processing is very simple. )
View detail
I was waiting for this kind of thing.
Along with the high throttle installation of NSR, LightSW disappeared from RightSwitch, and it ran constantly as LightON for a while.
However, since Battery is weak at the 88th year GB 250 CLUBMAN, if possible turn on Light / OFF Switch was wanted.
The conventional Universal Switch has a wide width, pasted Typeetc. I just gave up ones that can not be installed.
So, I knew this product and bought it barely between Throttle holder and Kill switch so I bought SeesawType.
The installation fits somewhat tight but well, it looks Slim so it is not noticeable, I am very satisfied. (It is even better if it is a little more Small)
I thought that Body is a plastic of Black and Switch is a little flashy with Plating, but the Separate handle of Vintage motorcycle has a lot of Silver series colors, so it blends with others.
Just for Replica and the latest Sports, Plating switch may not suit you, but I think that it can be used surprisingly because it is quite Slim.
A little disappointing is that Wiring is Quantity : 2pc As it is going out, those who are worried need ingenuity to hide. I put Wiring in the 5 mm Harness tube and made it inconspicuous.
View detail
400X
Purchased as SW of 400X Fog Lamp. The attachment was attached to the Handlebar on the Clutch lever side. I tried to light up in Tunnel several times, but it did not matter. Although it was written about countermeasures against rain with other impressions, I changed the angle of attachment and reinforced with Tape. From now on, I will think about measures while experiencing rainy season and rain.
View detail