Reviews
HURRICANEClutch Cable
Clutch Cable was cut off.
I tried to buy OEM Product!
HURRICANE's Clutch Cable is less expensive.
I bought it instantly!
It's a safe Manufacturer, so it's a Recommendation!
View detail
I bought the same one as before.
Quantity when the Handlebar was previously replaced.:Longer Clutch Cable that came as a set.
I don't have much to say in detail because I just purchased the same product in Single Item, but it helped me because the Clutch, which was very stiff, became very light.
View detail
Is it a recommendation for those who value appearance?
Used for MBX50F.
I purchased and replaced it just for looks.
Bought it for the looks, too bad you can't see much of it in the shadow of the Tank, I knew that, but...
Depending on the installation, can it be made to stand out? (I don't like to see Wire outside, so I keep it quiet...)
The movement of the wire itself is not so different from that of the OEM, but if the wire has deteriorated too much or if the rust on the wire is noticeable, we recommend replacing the wire, but we are not sure if it is that good.
View detail
Fits: HONDA LLever&Holder made by KITACO, HONDA GORILLA, HONDA MONKEY
From Red to Black
When the clutch cable I had previously used broke, I replaced it with a cable I had on hand, but I could only find a red-colored cable.
I replaced it anyway, but the Red color Cable is still the same. "Everything" The first time I saw it, I didn't like it because it had a
We decided that black is the best color for cables, so we replaced the cable with this one.
View detail
Good
I replaced the Z900RS Handlebar with Musashi Kai Fat bar.
I purchased this product because the clutch cable was too tight. The quality of the cable is similar to that of OEM cables, so I am satisfied with the large cable.
View detail
Smooth Clutch operation
[How is it used?
Purchased for cb400f. First replacement in 30 years.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It is not difficult, but a little Large strange.
How was your experience with it?
Smooth Clutch operation is available.
Clutch was heavy because I hadn't changed it for about 30 years, but it seems lighter now.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA CBR929RR, HONDA CBR929RR, HONDA CBR929RR, HONDA CBR929RR, HONDA CBR929RR, HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade)
OEM same etc.Size!
I used it on my HondaCBR929RR.
For better or worse, OEMs are the same etc.
The heat resistant protective rubber to pass through the side of the Engine was thinner than OEM, so I was a little nervous.
The removed OEM rubber was cut and wrapped around the top to secure the Tie Wrap.
After purchasing, I checked the price of the OEM Product webig and found that it had the same Gold price, which made me wish I had gone with OEM.
I have no problem in using it, so it's good, but I give it a minus 1 rating because the rubber thickness was too thin.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY RT, HONDA MONKEY BAJA
Replacement Clutch Cable for the SP Takegawa Clutch Cover on the Grom
About quality and texture: I am happy with the quality of the clutch cable from SP Takegawa, 850mm long cable with rubber boots on the clutch cover end, a stainless steel adjuster, nylon clip on the clutch lever end and a plastic sleeve over half of the cable length. About the feeling of use: I find the little additions like the nylon clip to reduce wear from the lever and the rubber boots to protect the cable from water ingress very helpful in maintaining a well operating cable cable like this one from SP Takegawa. Products to buy together: If you have a missing or damaged rubber boot at the clutch lever that would also be desirable to purchase along side the clutch cabe to minimise water ingress from that end of the clutch cable for a longer service life. Difficulty of installation: The process to install takes about one hour, the right side fairing on the Grom need to be removed to assist in routing the clutch cable. Disconnect both ends from the clutch cover and clutch lever and remove the old cable, then feed the new cable and be sure to avoid sharp bends and possible damage from chaffing and exhaust piping. Finally perform you clutch adjustment. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a well designed clutch cable that will last a long time in service but when compared to Honda clutch cable it is price a lot higher. About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: The 850mm long cable is a good length for the Honda handle bars on the Grom. If you are using a lower handle bar setup then you will want a shorter clutch cable. View detail
I'm happy with the result, but ...
md30_BAJA. 。 I found a frayed wire on the Lever side, so I ordered a standard length, which is fixed with a WireBracket between the Engine and the Seat, and the end of the Wire is connected to the Clutch. (I think that the) WireBracket is loosely bent. (30°? Elbow) The one I received was a Straight Bracket. I was a little impatient, but was able to install it without any problem. After the replacement, the lever operation became considerably lighter. I would have liked to use a looser Elbow if possible. View detail
Products for peace of mind
It is safe to use
In my environment of use, I do not feel any special deterioration even after several years of use, but I am replacing it just in case.
View detail
Fits: SUZUKI GSX750S Katana, SUZUKI GSX750S Katana, SUZUKI GSX750S Katana, SUZUKI GS1000E/S
Reprint edition
I am very grateful to be able to purchase a new one for my tiller Handlebar. View detail
Not for me.
I think it's partly because I'm inexperienced, but no matter how I adjust, the Clutch drag happens.
I spent several hours checking the details, but eventually gave up without a cure.
View detail
Fits: HARLEY-DAVIDSON DYNA Family, HARLEY-DAVIDSON TOURING Family, HARLEY-DAVIDSON SPORTSTER Family, HARLEY-DAVIDSON SOFTAIL Family
Happy with the shortening!
As a result of changing the Handlebar in XR, there was quite a bit of OEMCable left over.
The root of the clutch cable broke off and primary oil leaked out. We assume that the extra tension was applied to the base of the cable and that it broke off.
I was looking for something shorter than OEMCable and found this product! I bought it just to try it out.
Installation should not be difficult since it is a simple replacement, but since the broken Screw is still on the Case side, we asked a Motorcycle shop to do it.
The texture etc. is the same etc. as OEM and I am satisfied with the shortening.
View detail
Fits: HARLEY-DAVIDSON DYNA Family, HARLEY-DAVIDSON TOURING Family, HARLEY-DAVIDSON SPORTSTER Family, HARLEY-DAVIDSON SOFTAIL Family
Almost satisfied
This is almost the lowest price among Clutch Cable for XL1200C SPORTSTER 1200.
It is a replacement from OEMCable, but it feels a bit lumpy.
I have used it for about 5000 km and had no problems at all.
View detail
Endorsed by Motorcycle shop.
When I bought the car secondhand, the wire relationship was falling apart and was replaced before delivery, and the dealer used this Manufacturer at that time.
It is OEM compatible rather than external.
The replacement was done at the store.
good point
The performance is comparable to that of OEM products.
If grease up is done properly, it will last for a long time.
I replaced it before delivery and have driven about 30,000 km with no problems at all.
Easy to obtain.
●Lever movement was always good.
A bad point
● No dramatic changes are expected.
I honestly don't think that the Levers need a dramatic change.
If the movement of OEM, and the durability of the same etc. as OEM ●
View detail
Long is difficult to handle,...
[How is it used?
Used for SEROW225 (1KH).
The clutch was feeling a little heavy, so I replaced the clutch cable with a feeling of God's help.
The OEM was a little expensive, and this one from HURRICANE was a little cheaper, although it was Long, so we chose this one.
Was the one you received as per Image?
It was as per Image, maybe 15~20 cn longer than OEM.
Was the installation difficult?
Since it was a little longer than the OEM, we had to be a little creative in handling it. To be honest, I wished the OEM length was longer.
The connection between the Clutch Cable and the Engine Case is simple, but a little confusing.
You should take a good picture or something before you remove it to document how it was attached.
How was your experience with it?
I think it is slightly lighter. I think it can be lighter depending on how it is handled.
[Included Parts:were they on?
A white plastic cover is attached to the end of the clutch lever side of the clutch cable.
I am... Packaging Cover?" I thought, "I took it, but that is to be used as it is....
[Was there anything that disappointed you?
None
Other items that would be helpful
Items to buy together
I recommend this for lubricating Wire, although it is a bit expensive. You can throw it away except for this.
https://www.webike.net/sd/23380063/
View detail
Fits: SUZUKI GSX750S Katana, SUZUKI GSX750S Katana, SUZUKI GSX750S Katana, SUZUKI GS1000E/S
You must be relieved.
We specialize in KATANA.
You must be relieved.
The Reinforced Clutch made it much heavier.
Seems to be a little lighter.
It has the same shape as the OEM.
No discomfort.
The price is also better than a certain unicorn store.
I think it was somewhat cheaper.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY RT, HONDA MONKEY BAJA
Used for Takegawa specula
I had been using the one that came with my Specula Kit for many years and wanted to replace it before it ran out.
I went with a 10 cm shorter one than the Kit one, and it handles nicely and works fine.
View detail
Low FrictionWire for Z 115mm
I had been using Stainless Steel Wire and couldn't tell the difference between it and this product. View detail
Fits: HONDA CBR600FX, HONDA CBR600FX, HONDA CBR600FX, HONDA CBR600FX, HONDA CBR600FX, HONDA CBR600FS, HONDA CBR600FS, HONDA CBR600FX, HONDA CBR600FX, HONDA CBR600FS, HONDA CBR600FR, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F
OEMs, etc., modest prices.
The workmanship is indistinguishable from that of an OEM Product and can be used normally.
We stock it as a spare in case of emergency. We chose this one because of its slightly lower price.
Even if some OEM parts are discontinued, they may still be listed in the lineup here, so they are also useful in such cases.
View detail