Reviews
Fits: HONDA MSX125 (MSX125 SF not available), HONDA glom
It is recommended for those who want to keep the NORMAL blinker lens etc.
Tail lamp was originally LED, and the headlight is also LED. If it becomes like this, it's natural that I want to make the blinker LED too. (?) thing....I wanted to do something with the STD Shape, but after touring the other day, I told my wife It's hard for Blinker to see when Brake is on. That being said, I was inspired to buy one. I still wonder if the Valve lights usually lose out to the LED lights.
Because there is not much space inside of Blinker lamp when I confirmed beforehand, I bought this one, but the height of LED Bulb is unexpectedly low, and I think that the product of 05-08-0098 was good when I felt that I put it on.
Because there was no reflector at all in the Blinker of DL1000 V-STROM and it was still Black color of resin, I put Aluminum Tape inside instead of the reflector and made it so that the light would not become useless. The sharpness of the flashing is good, and I am satisfied. The only thing that was worried about was that the indicator in Meter when operating was not good. "Blinking" Not the Blinker. "point" When the Perdition. The thing is that the light is reduced when the I looked it up in the Roadway Vehicle Act and found that Article 41, Section 2, Article 137, 4-12 of the "A device shall be provided to indicate to the driver the operational status of the device. It's just that it is, so I don't think it's a problem for car inspection.
By the way, the area of the lighting part of the blinker lamp is determined to be more than 7? or more, orange, the brightness of the bulb is more than 10W and less than 60W, and the number of blinks is less than 60-120 times per minute. Because this time it is NORMAL and Relay is also for LED, the function of the important blinker corresponds sufficiently.
View detail
LED is still high as usual
I am satisfied except price..
Valve exchange can be done without removing Cowl, and when attaching the attached relay
Seat down Remove Cowl of Right Side only. Work is enough for as long as one hour.
Prepare Nipper for RearLens cover + Driver, Tie Wrap's Cut.
Like everyone said Kit (Relay) Relay's "Chi - Chirping
Although it disappears, Ninja 250 does not bother because it was Small because it was originally Ka Chica tone,
Since the winker is displayed on Meter, I think that it is a particularly problem.
Thanks to LEDization, until that time Barrel from the blinking light bulbs, light Sharp
It turns into flashing and it is Large satisfied.
In addition, power consumption, out of ball etc etc etc. Also considering whether LEDization is very significant.
The cost of LED is surprisingly reasonably cheap, so if the price becomes cheaper at a moment ◎
View detail
Fits: SUZUKI GSR250, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX, HONDA CBR125R, YAMAHA MAJESTYS
Used in CYGNUS X SR (SEA5J)
I was worried about the Orange sphere standing out in the NORMAL and I was looking for a lot of things, and I found this product (05-08-0098).
As well as the LED bulbs, Relay can also be pontooned in the same shape and placement in the same position as the OEM.
It's a bit pricey, but you can buy Quantity:It's easy to install without having to worry about it. The only thing I have to say is that I had to be careful not to break the claws when removing the cowls.
View detail
Fits: SUZUKI GSR250, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX, HONDA CBR125R, YAMAHA MAJESTYS
Mukawa LED Blinker
PCX is replaced by Valve 1 / 10 consumption and reduce the burden on Battery
Crispy flashing Satisfactory level such as sufficient light intensity and bulb's stealth effect. Relay is Wide range and sound is silent. Even in other types of cars / It seems that it will be the power consumption of 5.
View detail
Fits: SUZUKI GSR250, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX, HONDA CBR125R, YAMAHA MAJESTYS
All is in one.
I installed it in the 2013 PCX. This Set contains LED Bulb and Blinker relay corresponding to LED, so there are no other necessary items.
It is necessary to open the Front mask in order to exchange the Relay, but is it still to be completed within an hour until all the work is completed?
I am satisfied with the flicker with a peculiar LED
View detail
Fits: SUZUKI GSR250, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX, HONDA CBR125R, YAMAHA MAJESTYS
It shines beautifully!
Takegawa LED blinker BulbKit is attached to PCX for power saving and apparent Makeover.
Illuminated in a beautiful color compared to NORMAL bulbs, I think that Orange bulb was visible through Lens until now Clear, I think that refreshing looked a bit.
It's a bit expensive, but after all Takegawa is good!
View detail
Fits: SUZUKI GSR250, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX, HONDA CBR125R, YAMAHA MAJESTYS
The SP TAKEGAWA Hyper LED Blinker Bulb Kit is an exact replacement for the bulbs and blinker originally found on my 2013 Honda pcx 150. Shipping time was phenomenal -- as though I had ordered the parts from a stateside supplier. Thanks
The SP TAKEGAWA Hyper LED Blinker Bulb Kit is an exact replacement for the bulbs and blinker originally found on my 2013 Honda pcx 150. Shipping time was phenomenal -- as though I had ordered the parts from a stateside supplier. Thanks View detail
Fits: SUZUKI GSR250, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX, HONDA CBR125R, YAMAHA MAJESTYS
Great work business referred to as removing a Front cowl first of all (smile after clearing this, the smallness of a hand says a thing.) Although the removal of the Blinker bulb itself was easy, the place was narrow and a hand did not enter very
Great work business referred to as removing a Front cowl first of all (smile
after clearing this, the smallness of a hand says a thing.)
Although the removal of the
Blinker bulb itself was easy, the place was narrow and a hand did not enter very much well.
If it does with the
empty hand, it is injured, and that will be right and I will regard a work glove as necessity.
View detail