Reviews
For mounting bolt on Generator cover
I bought it for mounting bolt of Generator cover of CUB series Engine.
The bolt under the Left is the same length, but the main reason I purchased this bolt is because the OEM bolt here is stuck in the back, so it is difficult to insert the tool.
View detail
Great tool set makes working on my bikes easy.
I like these wrenches.high quality, japaned made,feeling hand perfect.the cost is right and works fine They are quick and easy to use and I keep them with my tool box.The length is sufficient. It is not too long. It fits in the tool box. It is quick and easy to check tightness of almost every bolt on my bike with these while riding or servicing my bike.Wish they offered a set with 7mm and 13mm.Highly recommened. View detail
Purchased for Rust removal, surface correction and chamfering.
[Usage]
Bore Up Kit BALI removal, used for rust removal, surface correction, and chamfering, Oil is Daytona Oil stoneOil.
[Feeling of use]
The size is just right to fit in your hand, but be careful not to apply too much pressure or you will shave too much. Use #400 for finishing.
When I first started using it, it sucked in Oil immediately, so I had to put Oil on it thoroughly before using it.
(Points to note)
Recommendation is to put it in a Vinyl bag etc. when storing it. If you put it on paper or cloth, it will be stained by the oil that comes out.
View detail
![[Repair Parts] Socket Set Screw](https://img.webike-cdn.net/catalogue/images/107206/00-00-0510_TS.jpg)
The pack of 6 replacement socket set screws sure come in handy
About quality and texture - The socket set screw from SP Takegawa is made from stainless steel and is sized at M3 x 4mm while the quality from the overall fit and finish is perfect. About the feeling of use - The socket set screw is used on the drain bolt with magnet and does a wonderful job of securing the stick temperature sensor but being so tiny are easily lost so the pack of 6 replacement socket set screws sure come in handy. Products to buy together - The socket set screw are a key part to work together with the drain bolt with magnet as is the sealing washer which are a product worth buy also. Difficulty of installation - The installation of the socket set screw is a simple task that took 0.1 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to secure the socket set screw into drain bolt with magnet. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the socket set screw is no different. Having the pack contain a quantity of 6 socket set screws helps achieves this. About shipping and packaging - With there being no cost difference between sea freight and EMS for the socket set screw, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing small common use products like this from Webike Japan is the best option when combining multiple parts together if you are also taking into account the shipping cost. View detail
Fits: DUCATI STREETFIGHTER S, DUCATI 848EVO, DUCATI 848, DUCATI 1299Panigale, DUCATI 1299 Panigale S, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale S/Tricolore, DUCATI 1098S, DUCATI 1199Panigale R, DUCATI 1098S, DUCATI 1098R, DUCATI 1098, DUCATI 1098, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Touring, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Granturismo, DUCATI 899Panigale, DUCATI Multistrada 1200S Pikes Peak
Good design. However, the hexagonal hole is delicate.
Coloring and design are both cool and satisfactory.
However, it should not be used for frequent removal/attachment, as the hole slips easily due to the aluminum material and 3mm hexagonal hole, which is designed to emphasize design.
If there is a lot of removal and installation, I personally recommend Ducabike with 4mm hex holes.
View detail
Easy Plug replacement
I've been using the OEM plug wrench for a while now and it has definitely made my work easier. View detail
Compact
Folding Container20L
The quality is good and the SIDE middle window allows for loading and unloading. However, the price is high. I wish there was something with a lower price and the same quality, etc.
View detail
For Chain exchange.
Used to replace Chain in 428 Size.
It is convenient to have multiple Adapters and to support various Chains. The texture is cheap, but the whole thing is rigid, and I think Large things like Pin are well made.
If you only need to replace it once, it is cheaper to ask a supply store, but doing it yourself is simply more surface white and satisfying. Durability is unknown.
View detail
Easy to use
I used to use another company's aluminum screws, but they were so soft that the hex on the head of the screw would come off when tightened.
It is getting worse as it spreads more and more.
This product is hard and tight.
If the head size were a little larger, I would have used four of them, but they were Exactly in the part I use.
Cost performance is good.
View detail
I don't use Size very often.
I rarely have a chance to use a 27mm Combination wrench, but I bought a SIGNET wrench with a good balance of price and quality, thinking it would be used occasionally for suppressing Kashimaru-kun's Holder and for Axle Shaft of Big bike.
It is indeed a powerful Size.
View detail
put together in a presentable manner
Recent Small blinker wiring is ultrafine
It's as if it would tear into a thousand pieces if you applied a little too much force.
If you attach it as it is, it will surely break off.
And it looks bad Parenthesis.
So I reinforced it through Tube.
Finished by decorating with an Amigumi Sleeve
Just this much will make it look so much better.
It's definitely better than the BlinkerWiring roundup.
View detail
Trust.
It claims to be weather resistant, so trust it anyway.
I have always been an Emon believer.
… I don't think it's any different than the others, … (laughs)
2sq for Grounding Wire.
View detail
No wasting Gasoline
The Breather Hose 650mm 6mm Diameter on the tank cap of the KLX230R does not have a valve, so when it falls over, gasoline leaks out. However, I wanted to prevent leakage by attaching a valve to the tank cap to prevent physical exertion if I rushed to wake the tank cap up. Actually, I bought a Short Type with a Valve on the tip of the Hose before this one, but when I fell down, Gasoline dripped out of it. It is a pity that I cannot match the color with Kawasaki. View detail
Purchased for chamfering
[Usage]
Used for Bore Up Kit BALI removal and exhaust surface chamfering, using DAYTONAOil stoneOil.
[Feeling of use]
Good size, fits in my hand, easy to use.
When I first started using it, it sucked in Oil immediately, so I had to put Oil on it thoroughly before using it.
(Points to note)
The Oil that is sucked in comes out gradually.
Recommendation is to put it in a Vinyl bag etc. when storing it. If you put it on paper or cloth, it will be stained by the oil that comes out.
View detail
Good accuracy
I had been using cheap valves and Type radio pliers, but I decided to go with a proper Manufacturer's product, so I chose KTC's Radio pliers.
Even with a strong grip, there is no gap at the tip, and the precision is as expected.
View detail
With this.
Minimum required tools.
If you are going to modify the electrical components yourself, at the very least, this should be enough to make the Large sturdy.
There are cheaper ones, but they are difficult to use or lack Size….
If you look above, there is no Drill, so for now, here is the Recommendation.
View detail
Before you get into trouble for wrapping vinyls.
[How is it used?
Used for protection after Wiring process
How was your experience with it?
Compared to regular vinylite, it is much easier to use because the Tape thickness is thinner to begin with.
The adhesive itself is quite strong.
I even tried peeling it off after a few days, but the adhesive did not remain on the Wiring side.
It is more cost-effective to buy this vinyl than to use commercial vinyls and get into trouble.
[Points to note]
It is a little sad that the appearance of the roll itself is no different from that of a vinite.
View detail
Black and Silver&Pink were made Purple.
[How is it used?
Brake&Clutch lever
Universal Bracket, etc.
Was the one you received as per Image?
The product was exactly as shown in the Image.
Was the installation difficult?
How was your experience with it?
It is very beautiful and I like it.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
No gain.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Used with Axle Nut
No problems with this product. I use it with Axle Nut on my off-road motorcycle.
For a moment I thought about substituting Pliers, etc., but then I thought, well, I'll just buy it and add another Socket! (Lol)
SIGNET is a Brand that I trust, so I chose them first based on cosmetics. The performance is also fine.
View detail
Convenient to have. Used during car wash
[Usage]
I use it when I wash my Motorcycle to prevent water from getting in through the Exhaust System. I used to use Dustcloth as a substitute, but this product is easier to use. Conversely, it is a product that can be used as a substitute, so I feel the price is a little high.
[Feeling of use]
Just plug it into the Exhaust System outlet before washing the car.
Since the part to be inserted is rubber, there is no risk of scratching the exhaust system when it is inserted.
(Points to note)
The Rubber on the insert is hard, so you need to push a little harder when inserting it.
Sealability seems to be there. It is not a product that is completely waterproofSeal.
View detail