Reviews
Fits: HARLEY-DAVIDSON Sportster S, HARLEY-DAVIDSON Pan America, HARLEY-DAVIDSON Nightster Special
Flashing switchCover
Very good!
The switch knob was originally shaped to be far away and difficult to operate for Small Saijapanese with hands, and it was a part that we had to put up with.
Push cancellation was easy and finally Refreshing.
If I may say so, it would be better if there is an arrow or some other prominent mark-like label or paint on the top surface. I applied seals, but the surface is matte textured, so seals tend to peel off easily.
View detail
Fits: YAMAHA YZ125X, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ426F, YAMAHA YZ450F, YAMAHA YZ80, YAMAHA YZ85
It may be a classic.
I bought this one because a certain lever that does not break interferes with the CloseHand guard on a 4Finger. If you care about the appearance, you should choose the cut-out type, but if you don't want it to break during the race, you should choose the Forged Type.
The exterior is of high quality, as one would expect from Zita. Installation is a simple and easy process. Adjustment is stepless, but requires a tool, so it is a little troublesome.
I have fallen a few times since installation and have not had any breakage or other troubles.
View detail
Tightens up the look.
Was the one you received as per Image?
It was something I saw often, so it's on Image.
Was the installation difficult?
I used a hand guard from the same Manufacturer, so no problem at all!
How was your experience with it?
I don't know if it is useful yet because I haven't driven it in a place where it would be useful, but it looks very atmospheric and satisfies my sense of ownership.
[Included Parts:were they on?
Installation Bolt
[Was there anything that disappointed you?
None
Other items that would be helpful
Of course, the same Manufacturer's hand guard is only a few minutes' work!
View detail
Firmly.
I could not tell how light the Clutch was, but the build quality was solid, as if it were an OEM product.
Durability, that is the most decisive factor.
View detail
Might be useful to have.
I think it depends on the way you fall, but in my case, when I fell standing up on a forest road, this helped me to minimize the Damage. View detail
Fits: SUZUKI V-Strom650 L2, SUZUKI V-Strom650, SUZUKI V-Strom650 XT, SUZUKI DL650 V-Strom, SUZUKI V-Strom650 L2 XT
Engine Guard installed
Installation should not be a problem if you have some knowledge of maintenance.
An Engine Guard was added to protect the engine in the event of a runaway and to mount the Fog Lamp.
View detail
For NINJA400R
Installed on NINJA400R.
I was able to do it without removing the cowl, but I had a little trouble tightening the bolt because it was too small.
If the installation had been a little easier, I would have given it a perfect score without any complaints.
View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB
Rigidity is up!
The Front perimeter will look Snap.
The fluffiness was significantly reduced and operation felt easier.
View detail
StyleUp is a sure thing, but the rider's body shape will affect the Riding.
The GCraft seat is a good choice for me because of the balance between the tank and the seat. The ground contact area of the seat is limited, so in a positive sense, the position is fixed and the stability is increased. If you are heavy or taller than 170cm, you may feel cramped. View detail
Fits: KAWASAKI ZX-4R, KAWASAKI ZX-4RR, KAWASAKI ZX-25R
Small modification required
I wanted to improve the grip at a track meet, but not enough to install a race cowl, so I decided on this product.
Weight is approximately 950g, a slight increase in weight from OEM (FRP).
Color because it will get dirty with Rubber replacement.:It is unpainted, but the matte texture makes it feel comfortable as it is.
The installation of the product was partially interfered with by the body of the car. The installation itself could have been done without modification, but we did not want the stress to be concentrated and cause cracking.
Fitting is otherwise good, and the rear end, which had a wide gap in the company's 10R model and seemed prone to water and dust infiltration, is now better aligned.
The attached rubber was already cut, but I beveled it with File because the Edge was going to be damaged.
The installation was a few Bolts, but it was unexpectedly time-consuming due to its location in a narrow space, and I was thinking of switching to NORMAL depending on my mood, but it was such a hassle that I didn't feel like doing so.
Wet type rubber is attached. The gripping feeling is very large, but it is difficult to shift a little while sitting on it because it grips as if it is attached.
The sponge also feels resilient to the touch, but when you sit on it, it feels chica-chic and is not suitable for everyday use.
(It's RaceParts, of course, but I was thinking of using them on a regular basis because they are a pain to replace)
View detail
[Color] Smoke Screen
Installation was easy, even for an amateur. With a good density, (in Tokyo) I could see in front of me even at night, the Large size was just right, and the wind hit me not hard at all at 100km/highway cruising. View detail
trial and error
Only Bracket is purchased to install Separator.
Since it cannot be installed as it is, it was processed secondarily. The Stem Steel Emblem is not installed.
Please note that this is not normal usage.
View detail
Fits: YAMAHA WR250R, Others , HONDA CRF250L, KAWASAKI KLX250
Just the right length.
Although I have not had the pleasure of using it on forest roads yet, I tested the actual pull on Garage and found that the thing itself was easy to grip and firm enough to lift the Front. View detail
Famous Stack Belt
Product Name
TREKFIELD TrekField Stack Belt
Item Number
W-3208-P29696891
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
5 minutes
Required Tools
Scissors type, etc. would be perfect.
Why did you choose this product?
I chose this one because I wanted to put a Belt on the Seat to make it easier to move the body when Stacking.
Was the one you received as per Image?
It was just as shown in the Image. I can use this one without any worries.
Was the installation difficult?
It's not particularly difficult, since all you have to do is attach it to the Fork.
How was your experience with it?
The fabric seems to be sturdy, so I think it will be safe. I would also like to try it and see if there are no problems with this one. Also, other people are using it and seem to have no problem with it. I have high expectations for the future.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KTM 500EXC-F, KTM 690EDRR, KTM 450EXC-F, KTM 450SX-F, KTM 350SX-F, KTM 300EXC, KTM 350EXC-F, KTM 250SX, KTM 250SX-F, KTM 250EXC-F, HONDA CRF250R, HONDA CRF450R, YAMAHA YZ250FX, YAMAHA YZ450F, YAMAHA YZ450FX, SUZUKI RMZ250, KAWASAKI KLX230R, KAWASAKI KX250, KAWASAKI KX250F, KAWASAKI KX450
To help us help you.
Product Name
DRC DRC FrontStack Belt
Item Number
D6426
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
5 minutes
Required Tools
Scissors type, etc. would be perfect.
Why did you choose this product?
I chose this one because with this product, I will be able to get help from anyone in case of Race, etc. I also chose this product because of its low price.
Was the one you received as per Image?
It was exactly as shown in the Image. It was more solid than I expected for the price. I hope someone will see this product and help me.
Was the installation difficult?
Installation was not that difficult.
How was your experience with it?
It is not something that you feel particularly when you are running, but I think you will feel glad that you have it in case of an emergency.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB
I'm glad I bought it!
I wasn't sure whether to buy it, but, I'm glad I did! ♪ (??????) ♪ View detail
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ400F, YAMAHA YZ450F, YAMAHA YZ450FX, YAMAHA YZ250FX
Easy to apply Decal without YAMAHA's stamp
When applying Decal, OEMGuard has a raised YAMAHA imprint, and I bought it because I thought Decal would peel off easily.
It looks good, installs well, and is durable enough when used. No complaints, no excessive interference with the Fork outerTube, and the Decal was easy to put up.
View detail
SM LINEFender MD44 installed
As per the impressions of our predecessors, the MD38/44 can be installed without any body modification.
Reasonable price and VisualUp, no complaints!
However, in my case, I have prepared the following additional components
Spacer:6.2mm ID x 15mm OD x 6mm L (qty:4)
Bolt:M6 x 30 (qty:2)
Flat Washer:M6 x 22 (qty:4)
When MD38/44 is installed, the spacer thickness should be at least 6mm to avoid interference with the car body. The outer shape may be a little larger than 15mm.
It is fastened with 4 OEMBolt, but for some reason, Quantity:I also bought Bolt because each 2pc is a different length (my used one) and when I put Space on, the shorter one doesn't reach.
When tightening from the tire side, the bolt groove on the FenderBody is large, so the washer is also large. 22mm larger than the bolt groove will cause the washer to ride up.
For your information.
View detail
After much waiting, it finally arrived!
Cool! I'm glad I put it on! ♪ (??????) ♪ View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-10, YAMAHA MT-10SP, YAMAHA MT-09, YAMAHA MT-09SP, YAMAHA MT-07, YAMAHA MT-25, YAMAHA MT-03, YAMAHA Tracer9GT, YAMAHA Tracer900, YAMAHA Tracer900GT, YAMAHA MT-09Tracer , YAMAHA XSR900, YAMAHA XSR700, YAMAHA FZ1/Fazer
Very satisfactory product
The finish is satisfactory in terms of both texture and ease of use.
However, the gap between the tank and the cap is a little empty, so we have to be a little careful when washing the car in the rain or when washing the car, but there is no problem because water never enters the tank.
View detail